GApathfinder Posted August 16, 2011 Share Posted August 16, 2011 Added an OMGDrift.com sticker Gotta rep my main love of Drifting <3 Link to comment Share on other sites More sharing options...
Slartibartfast Posted August 16, 2011 Share Posted August 16, 2011 The muffler guy replaced my warped Y pipe... finally, my exhaust is quiet! It's enough quieter that I'll need to keep a closer eye on the speedo... Link to comment Share on other sites More sharing options...
vagabond Posted August 16, 2011 Share Posted August 16, 2011 Pulled the headlight switch on the 94 and cleaned the contacts, Yea have dash lights and taillights again, replaced the door lock actuator on the passenger rear door. Replaced the door thingy that holds the door open on the 88 got tired of it closing on my leg. Yeah we've been to pickapart again Link to comment Share on other sites More sharing options...
Towncivilian Posted August 17, 2011 Share Posted August 17, 2011 (edited) Painted my bumpers, fender flares, rear mudflaps (those were an absolute bitch to put back on, I just put them back on an hour ago... worst part of it all, plus I ended up with a pushpin or something left over), and the black covers next to the fog lights. Not perfect, but good enough. Pictures tomorrow or something. Edited August 17, 2011 by Towncivilian Link to comment Share on other sites More sharing options...
edicer2 Posted August 17, 2011 Share Posted August 17, 2011 had my exhuast completed.... pcesetter headers, 2.5" back to the magnaflow high flow cat then 2.5" to the flow faster 40 series then 2.5" back to 3" manaflow stainless steel truck tip and had it angled out the side. I also cut out my old cb radio since i dont use it and replaced it with a 3 plug cig lighter and hid it in the glove box. I also rewired in my fuzz buster and led floor lights. I also tweaked the flip out dvd player so it doesnt hit when flipped out and can be angled better now! woot woot. Link to comment Share on other sites More sharing options...
Chodygt Posted August 17, 2011 Share Posted August 17, 2011 Starting to rip apart engine to do waterpump/ Timing belt. wahooo Link to comment Share on other sites More sharing options...
Chodygt Posted August 18, 2011 Share Posted August 18, 2011 took rad/pulllies covers off. now to take TB off Link to comment Share on other sites More sharing options...
jwmyers23 Posted August 19, 2011 Share Posted August 19, 2011 Accel super coil installed. It makes a world of differance with the Nology hot wires Now time for new plugs. Link to comment Share on other sites More sharing options...
edicer2 Posted August 19, 2011 Share Posted August 19, 2011 bought replacement leds for lighting up the floor at night. washed and wax it....still needs a good buff. going to start rust repair soon! Link to comment Share on other sites More sharing options...
DarkDragon Posted August 19, 2011 Share Posted August 19, 2011 New ngk plugs, Cap and Rotor done today. Link to comment Share on other sites More sharing options...
nunya Posted August 20, 2011 Share Posted August 20, 2011 ordered the key element to my next project i'm actually gonna DO. It's completly useless and pointless but will be awsome... keeping it a big secret though until it's completed Link to comment Share on other sites More sharing options...
Kyle94 Posted August 20, 2011 Share Posted August 20, 2011 put my "new" bumper on after painting. and installed (finally) my new drivers side door hinge pins. now my door pops open when pull the handle all on its own! Link to comment Share on other sites More sharing options...
devonianwalk Posted August 20, 2011 Share Posted August 20, 2011 ordered the key element to my next project i'm actually gonna DO. It's completly useless and pointless but will be awsome... keeping it a big secret though until it's completed Manly color paint scheme for your rocker panels? You know, like Mazda Miata black? Link to comment Share on other sites More sharing options...
Slartibartfast Posted August 21, 2011 Share Posted August 21, 2011 I figured out why the transfer case shifter had a rubber thing on it... without it, my right leg got rather warm. (Note to self: get replacement before removing broken part!) Link to comment Share on other sites More sharing options...
MY1PATH Posted August 21, 2011 Share Posted August 21, 2011 finished my cross member. Now I just need to powder coat it and chop up the frame to install it. Link to comment Share on other sites More sharing options...
ejin4499 Posted August 22, 2011 Share Posted August 22, 2011 Drove up to bear river and pulled a pennyweight of gold out. Link to comment Share on other sites More sharing options...
OlBlue Posted August 22, 2011 Share Posted August 22, 2011 Put on new clutch. t-stat, w-pump on my 91 (ol'blue), put engine back in the vehicle (not bolted in yet needs some wiggling). Went outside hopped in my 95 feeling pretty good about what I had accomplished and the starter gave me a "click click clickety click" (no suprise it had been acting up)...pulled starter in drive way, noticed a ridiculous amount of oil underneath (rear main seal???). Good times. Link to comment Share on other sites More sharing options...
MY1PATH Posted August 22, 2011 Share Posted August 22, 2011 I took it to the Infinit Of Tacoma show me and Derrick RTI parked it side by side. I flexed it out until the axle twisted the pan hard perch against the left shock. and it still had 3" more to compress.... I forgot my camera. And somehow my phone photos of the pathfinders did not save. Link to comment Share on other sites More sharing options...
Kyle94 Posted August 22, 2011 Share Posted August 22, 2011 No pics? it didnt happen. i uhh... drove it around, as a mobile advertisement. Link to comment Share on other sites More sharing options...
Harbinger Posted August 22, 2011 Share Posted August 22, 2011 Replaced the front Calipers, Pads & Rotors on Saturday. Also repacked my wheel bearings and slapped my new Warn hubs on. The brakes drag a bit but otherwise turn freely. Do I need to change something? Yesterday started on the Tension rod bushings. Got one tension rod removed but have a frozen bolt on the passenger side, figure I'll take the torch to it tonight, and if that doesn't work, I'm grinding the bastard off. From the looks of the tension rod I'll be ordering new ones as the old metal bushing sleeves are so rusted in place I can't remove them. O'well, what's another week or two of sitting on jack stands? Started on replacing the front sway bar bushings and end links, but ran out of light last night. Link to comment Share on other sites More sharing options...
5523Pathfinder Posted August 22, 2011 Share Posted August 22, 2011 No pics? it didnt happen. i uhh... drove it around, as a mobile advertisement. OH it happend my friend...... Link to comment Share on other sites More sharing options...
jwmyers23 Posted August 22, 2011 Share Posted August 22, 2011 I played tag with a Saturn today. Bent door, Smashed rocker, and bent rim. Looks like I'm going to the parts yart this weekend. Link to comment Share on other sites More sharing options...
Slartibartfast Posted August 23, 2011 Share Posted August 23, 2011 Ouch... gotta look out for Saturns/Buicks, around here at least there's usually an old person behind the wheel. I pulled out the actuator for the rear hatch lock, cleaned it out, and got it working again. To my surprise, the mechanism was very easy to pull and service, and a little white lithium got it rolling again. Link to comment Share on other sites More sharing options...
lint Posted August 23, 2011 Share Posted August 23, 2011 POR 15! ....I don't have to say more than that, do I. Link to comment Share on other sites More sharing options...
Chodygt Posted August 24, 2011 Share Posted August 24, 2011 finished timing belt/ water pump job. Runs great and no more coolant leaks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now