adamzan

Actually, that's not true. Purolator filters will fit, as will acdelco, mobil1, and K&N, just not the fatter style ones like wix or oem nissan. I have the same headers. Still haven't gotten around to installing my relo kit though. Probably should do that one of these days.

Fix it then...

Use 5w30, that is the reccomended oil in the manual. Thick oil is to mask problems. 5w20 is too thin.

Are you sure they're 10.8? I used 10.9 and have been in there for years, without issue. Even in the salt bath of canadian winters. Perhaps you got a defective bolt.

I actually scrapped my old truck for that reason. I was gonna repair it. But after i smelled mice i said nope and sold it to my friend for scrap. Sent from my SGH-I747M using Tapatalk

Or just not drive it in winter like me hahaha. I'm not sure what Ontario's rules are but I did repair the frame on a friends pathy and he took it in for inspection l, they did notice the patch, said it was well done and passed the truck. This was a reputable shop in downtown ottawa as well. Sent from my SGH-I747M using Tapatalk

Check the coolant temperature sensor. It's not a clogged cat. You need to test all the sensors and injectors and compare to values in fsm. If it runs fine cold but bad warmed up, it means when the ecu goes to closed or open loop or whatever it is getting bad data. This was the o2 sensor on my rig. Never heard of a Borg Warner o2? These trucks run best with a Bosch or ntk. Was this a direct fit sensor? The universals are @!*% so don't even bother. As a test unplug the o2 cold and try driving. If it still does it plug it in and do the same with the coolant temperature sensor. I'm not sure why people on here recommend throwing fuel pumps and catalytic converters at the truck...this isn't some domestic pos ford explorer. Sent from my SGH-I747M using Tapatalk

I would assume so. Or just change all fluids/filters to get a good baseline and start from the beginning. Welcome to the group, from the other side of the country.

Its under the dash fuse panel and its marked "meter" lol. The fuse links at the battery are just wires. Not actual fuses. Sent from my SGH-I747M using Tapatalk

Backups...They are worth every penny. Sent from my SGH-I747M using Tapatalk

Check the "meter" fuse. Also Check the fusible links at the battery. Those can cause issues. The canadian trucks are identical to the US ones BTW. The only difference is the metric gauges, and the daytime running lights. Which is actually nice to have because whenever I drive in the states no one has any lights on.

Yeah, and it always leaked... Everyone on here is just a bunch of whiners. Have you ever changed the oil on a ford focus, or a grand am? Those are 2 that are 10 times worse. I can change the oil on the pathfinder in less than 10 minutes and not spill a drop on the starter. Just be more careful and less like a gorilla.

There was a guy on here who was in his 70's. Think he's still around too. When I joined I was in the first age bracket, now I'll be in the third in a month :S

Should have cut it out and welded in some metal since you have the welder. I have patched more than my fair share of holes with bondo, just not on this truck lol.

I see bondo Sent from my SGH-I747M using Tapatalk

They are banjo bolts with copper washers. Sent from my SGH-I747M using Tapatalk

It should either weld or clamp on. You can also get the muffler/tailpipe as one whole assembly.

I believe it is a 12"

This is what credit cards are for. Sent from my SGH-I747M using Tapatalk

New pads/rotors this weekend. Along with new warn hubs

It's technically a "VG34" I bought a SC Xterra and it's decently quick. A VG34 with the blower from an X on it would be pretty bad ass.

Better than a lot of the Americans on here. Sent from my SGH-I747M using Tapatalk

Yes you can, take the hub off, remove the bearing lock nut plate, and then tighten the lock nut until there is no more play. You'll probably only have to turn it like 1/8 -1/2 a turn. You may want to clean and repack the grease while you're in there. As they are serviceable bearings.

This looks neat but I think for all the time spent I would have just bought another one. Sent from my SGH-I747M using Tapatalk

If you unplug it and it runs better, then the sensor is bad.