RCWD21 Posted December 28, 2016 Share Posted December 28, 2016 The snorkel should be here on the 4th and UCA and panhard bracket this week. But until then I've been organizing all the spare and replaced parts in the back and removed the rear bumper and jacked up trailer hitch. Sent from inside my potato Link to comment Share on other sites More sharing options...
CO_pathfinder Posted December 28, 2016 Share Posted December 28, 2016 You know if you call warn they will send you a maintenance/rebuild kit for free... whaaaaaaaaat Link to comment Share on other sites More sharing options...
maaakaaa Posted December 28, 2016 Share Posted December 28, 2016 Replaced the door handle so I can open it from the outside Link to comment Share on other sites More sharing options...
Backpacker Posted December 28, 2016 Share Posted December 28, 2016 Replaced the door handle so I can open it from the outsideI just did this last week, it's already &^%*ing loose and hard to open again!! I'm gonna lock tire the adjuster in place next time I'm in there. Or get the correct plastic piece that seems to be missing, that's probably a better idea. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
vagabond Posted December 29, 2016 Share Posted December 29, 2016 spent all day yesterday working on the 95 it's all together and looks ok, as I was cleaning it up I noticed the outer door handle on the passenger side is broken will change that out this morning, also drivers side rear door lock not working from the switch. will pull the rear hatch wind deflecter from the 94 and install on the 95. parts installed so far left frt fender, headlights, side marker lights, frt turn lights, grill, bumper, and valance? below bumper Link to comment Share on other sites More sharing options...
Bobsteriffic Posted December 29, 2016 Share Posted December 29, 2016 Removed my rusting 92' step bars and installed some OEM 94' step bars from a donor truck! Also finally fixed my climate control bulb which had been broken for almost four years now! Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted December 30, 2016 Share Posted December 30, 2016 Truck was running like crap. I didn't think the rattling was related. https://youtu.be/ttpqafpC2-A Link to comment Share on other sites More sharing options...
RCWD21 Posted December 30, 2016 Share Posted December 30, 2016 Truck was running like crap. I didn't think the rattling was related. https://youtu.be/ttpqafpC2-A You're not supposed to clean carbon from your exhaust with rocks! but I'm facing that issue with my 98 impreza. The front converter has rattled loose inside exactly like in the video and has been slowly melting and clumping up destroying itself in the process.. Sent from inside my potato Link to comment Share on other sites More sharing options...
Snowboarder12345 Posted December 30, 2016 Share Posted December 30, 2016 Hit up a scrap yard today to pull some parts. I really envy the guys way down south at times like this. Link to comment Share on other sites More sharing options...
Backpacker Posted December 30, 2016 Share Posted December 30, 2016 Hit up a scrap yard today to pull some parts. I really envy the guys way down south at times like this. I was at one last week and had to take my jacket off, it was too hot! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Mrelcocko Posted December 30, 2016 Share Posted December 30, 2016 Went to my local Pull-a-Part and got some back up parts for the "JUST IN CASE " box. Sent from my SM-G530T using Tapatalk 1 Link to comment Share on other sites More sharing options...
SpecialWarr Posted January 8, 2017 Share Posted January 8, 2017 Pulled into the local Canadian Tire because I have a leak at the brake line.... which I discovered on the highway in traffic.... and left it there for repairs. I do _not_ work on cars below 5 degrees Celsius unless I have to Sent from my SM-G386W using Tapatalk Link to comment Share on other sites More sharing options...
RCWD21 Posted January 8, 2017 Share Posted January 8, 2017 Got my snorkel in a couple days ago. Actually came with stainless steel hardware is for $170 is pretty fantastic quality! I'll be starting an install and review thread when I get the time to install it. Other than that I discovered a mouse making a home in my airbox today -.- Sent from inside my potato Link to comment Share on other sites More sharing options...
k9sar Posted January 9, 2017 Share Posted January 9, 2017 disconnected the positive post on the battery. Got home yesterday and the stupid truck was squeaking and chirping. Apparently, leaving it un-driven for 3 months and being in the teens out, the battery decided to crap out/in/etc and trigger the alarm (which was a terrible sound with a dead battery). I opened the door and it stopped.... not enough juice to squeak anymore. Still waiting for my replacement title so I can get her sold. Link to comment Share on other sites More sharing options...
Blue109 Posted January 14, 2017 Share Posted January 14, 2017 (edited) Tension rod bushings finally. Left side was really bad. Ate through the sleeve into the rod a little and def needs some welding on the bracket. Right side wasn't too bad. Both came apart easy. Having a bastard of a time lining up the rear hole on the right side. Hit myself in the face trying to force it with a screwdriver so it's break time lol Edited January 14, 2017 by Blue109 Link to comment Share on other sites More sharing options...
hawairish Posted January 15, 2017 Share Posted January 15, 2017 Picked off 3 buckets-worth of dried mud from the underbody and wheelwells from last weekend's excursion. That's what was left after power washing some of it the other day. Still need to power wash it again. 2 Link to comment Share on other sites More sharing options...
mjotrainbrain Posted January 15, 2017 Share Posted January 15, 2017 Picked off 3 buckets-worth of dried mud from the underbody and wheelwells from last weekend's excursion. That's what was left after power washing some of it the other day. Still need to power wash it again. Don't forget in the door sills! Link to comment Share on other sites More sharing options...
Mrelcocko Posted January 16, 2017 Share Posted January 16, 2017 Made my bumper on my 97 QX4 brand new again. Sent from my SM-G530T using Tapatalk 1 Link to comment Share on other sites More sharing options...
dirtbike23 Posted January 16, 2017 Share Posted January 16, 2017 trimmed fender and installed 32s on 15" wheel Link to comment Share on other sites More sharing options...
vagabond Posted January 19, 2017 Share Posted January 19, 2017 starting in on the new 88 I picked up a week ago, supposedly a tbelt was installed and it wouldn't start. My driveway is starting to look like a pathfinder convention 2 88s a 94 and a 95, the 94 is going to be my parts vehicle. 3 Link to comment Share on other sites More sharing options...
Backpacker Posted January 19, 2017 Share Posted January 19, 2017 starting in on the new 88 I picked up a week ago, supposedly a tbelt was installed and it wouldn't start. My driveway is starting to look like a pathfinder convention 2 88s a 94 and a 95, the 94 is going to be my parts vehicle. That's awesome haha. I was hoping the one I saw on Craigslist with lots of aftermarket stuff would last till tax time, it was on there for like 2 months, but the ad was taken down a week ago. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
vagabond Posted January 20, 2017 Share Posted January 20, 2017 That's awesome haha. I was hoping the one I saw on Craigslist with lots of aftermarket stuff would last till tax time, it was on there for like 2 months, but the ad was taken down a week ago. Sent from my iPhone using Tapatalk the white 88 one with the jim conner ucas? Link to comment Share on other sites More sharing options...
Backpacker Posted January 20, 2017 Share Posted January 20, 2017 the white 88 one with the jim conner ucas?I don't remember the color but it had the tubular upper control arms, Nissan pre runner style bumper, heavy duty torsions and thorley headers. It was in AZ Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
vagabond Posted January 20, 2017 Share Posted January 20, 2017 no headers and it has ca plates on it, it has Jim Conner racing ucas and double shocks haven't gotten underneath it yet 5spd, manual windows got it from a guy in OntarioCa Link to comment Share on other sites More sharing options...
Backpacker Posted January 20, 2017 Share Posted January 20, 2017 no headers and it has ca plates on it, it has Jim Conner racing ucas and double shocks haven't gotten underneath it yet 5spd, manual windows got it from a guy in OntarioCa Damn that sounds sweet. How much for it? This one was 500 and had a bad ecu. Would have been a great parts vehicle. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now