SilverPath Posted June 13, 2011 Share Posted June 13, 2011 Hooked it back up to the skidsteer so I could tow it out of my way again... Link to comment Share on other sites More sharing options...
Slick Posted June 13, 2011 Share Posted June 13, 2011 Those trees are way too far apart! i know, right! damn things Link to comment Share on other sites More sharing options...
NextToAlaska Posted June 14, 2011 Share Posted June 14, 2011 Pulled a chevy astro van outta some sand today, was a pretty steep incline so we used about 120 feet of Tow rope so i could stay at the top of the hill =D Link to comment Share on other sites More sharing options...
4x4white03 Posted June 14, 2011 Share Posted June 14, 2011 Changed the oil, dropped a K&N filter in the air box, added washer fluid, changed all three wipers, wiped down the leather seats, and cleaned all the windows. Link to comment Share on other sites More sharing options...
ANDY Posted June 15, 2011 Share Posted June 15, 2011 ordered lower and upper ball joints, strut rod bushings,and sway bar link kit. for 90bucks i think i got a killer deal Link to comment Share on other sites More sharing options...
jwmyers23 Posted June 15, 2011 Share Posted June 15, 2011 Washed about 10 pounds of North Carolinia mud and sand out from underneath the old girl. I also painted my hubs black. They look better black than that rust color. Man I hate that color it's starting to show up in more and more places. Link to comment Share on other sites More sharing options...
devonianwalk Posted June 16, 2011 Share Posted June 16, 2011 What? Where did you find N.Carolina mud at the OBX? Link to comment Share on other sites More sharing options...
jwmyers23 Posted June 17, 2011 Share Posted June 17, 2011 (edited) Out on the 4x4 beach. The roads behind the beach have some huge holes. This isn't my video but this is the road we were on. It was ALOT dryer when we were there. Edited June 17, 2011 by jwmyers23 Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted June 17, 2011 Share Posted June 17, 2011 I started her up. True story. Ordered some 3.5" Bronco Super Flex coils for the rear Rugged Rocks motor mount Link to comment Share on other sites More sharing options...
adamzan Posted June 17, 2011 Share Posted June 17, 2011 Greased the front end, ujoints, and the slip thing on the front driveshaft. Also noticed this when checking my slide pins: Link to comment Share on other sites More sharing options...
Meandmy92Pathy Posted June 17, 2011 Share Posted June 17, 2011 Just got in from Annual Training with the National Guard and got my NPORA stickers from fleureys :wiggle: :wiggle: pics to follow in about 20 mins!!!!!! Link to comment Share on other sites More sharing options...
Meandmy92Pathy Posted June 17, 2011 Share Posted June 17, 2011 Got my NPORA stickers from fleureys today......got them put on.....here they are...... fleureys ROCKS!!!!!!!!!!!!!!! Thanks, Steve Todd Link to comment Share on other sites More sharing options...
Towncivilian Posted June 17, 2011 Share Posted June 17, 2011 All I did was clean the windshield and the back side windows (windows are down right now, too lazy to roll em up), and slap a couple hard drive magnets on both my oil and fuel filters. They're probably useless on the fuel filter as the filter should catch any ferrous particles and rust, but these magnets were just sitting around collecting dust so I figured why not. Link to comment Share on other sites More sharing options...
nunya Posted June 17, 2011 Share Posted June 17, 2011 They look better black than that rust color. Man I hate that color it's starting to show up in more and more places. get used to it, it's a wd21 in PA... salt rocks! thinking about putting my new licence plate expiration sticker on, but that would require pants Link to comment Share on other sites More sharing options...
Towncivilian Posted June 17, 2011 Share Posted June 17, 2011 (edited) get used to it, it's a wd21 in PA... salt rocks! thinking about putting my new licence plate expiration sticker on, but that would require pants Make sure you scrape off the old sticker using a razor blade. I had like 3 or 4 stickers piled on top of each other and all but the bottom layer peeled off perfectly, so it would've been easy to steal. The bottom layer flaked off until I used a gasket scraper. Edited June 17, 2011 by Towncivilian Link to comment Share on other sites More sharing options...
nunya Posted June 17, 2011 Share Posted June 17, 2011 I always do since I hate the mountain of stickers plus I have a tinted cover on my plate anyway (not for that reason). Someone wants my registration sticker THAT bad they have to at least exert themselves a little. Be less effort to walk to one of my neighbors driveways Link to comment Share on other sites More sharing options...
sewebster Posted June 18, 2011 Share Posted June 18, 2011 Greased the front end, ujoints, and the slip thing on the front driveshaft. Also noticed this when checking my slide pins: Is that your brake pad falling off? Link to comment Share on other sites More sharing options...
devonianwalk Posted June 18, 2011 Share Posted June 18, 2011 You guys have all of those inspection woes yet you can have tinted license plate covers? We can't do any thing to our plates but, I'd take that over having to have my cars inspected each year .. I guess? Link to comment Share on other sites More sharing options...
nunya Posted June 18, 2011 Share Posted June 18, 2011 Nope, he left a window open Link to comment Share on other sites More sharing options...
nunya Posted June 18, 2011 Share Posted June 18, 2011 We ain't 'allowed', I just do. Mines not dark though and I change it out if it starts getting cloudy so my plate is still legible. PA sucks again! Link to comment Share on other sites More sharing options...
adamzan Posted June 18, 2011 Share Posted June 18, 2011 Is that your brake pad falling off? yep Link to comment Share on other sites More sharing options...
feyded Posted June 18, 2011 Share Posted June 18, 2011 I brought her in to the shop today to install my RC UCA's and upper and lower ball joints, only to run into problems constantly, ball joints just dont want to move when they havent been changed in 23 years. I ended up cutting the stock UCA's in half to get the spindle out(yeh I know, I should of just pressed them out =p ).. Going to finish the lift tomorrow and then install my new stickers from Fleurys!! Quick question if anyone can answer though, I have the stock electronic adjustable shocks in the truck now, can I just electrical tape(or use the old plug from the shocks as a cap) that plug and not cause any issues since Ill be replacing it with Rancho 9000xl.. Link to comment Share on other sites More sharing options...
nunya Posted June 18, 2011 Share Posted June 18, 2011 If you really want to keep the wiring, just tuck it up nice and out of view and use whatever you got that won't conduct current to "cap" em to keep em clean-ish. Electrical tape will be fine or like you planned using the old plug. Link to comment Share on other sites More sharing options...
ANDY Posted June 18, 2011 Share Posted June 18, 2011 **thread jack** about the adjustable ride harness can i use it for a rear aux light switch? Link to comment Share on other sites More sharing options...
sewebster Posted June 18, 2011 Share Posted June 18, 2011 Hmm, I didn't cap mine at all, just left em hangin. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now