5523Pathfinder Posted January 1, 2013 Share Posted January 1, 2013 Installed new front speakers the other day. Man, he needed it. The foam surrounds were completely gone. Link to comment Share on other sites More sharing options...
Nefarious Posted January 1, 2013 Share Posted January 1, 2013 Finished fabbing up a custom 2.5" exhaust to fit my obx headers, painted the whole system in flat black header paint, next is header wrap for the runners and y pipe, and gotta weld up one more hanger. Link to comment Share on other sites More sharing options...
Darek Posted January 2, 2013 Share Posted January 2, 2013 Replaced transmission shifter bulb with LED. Ordered leds for AC unit and 4WD switch. Link to comment Share on other sites More sharing options...
BBB Posted January 2, 2013 Share Posted January 2, 2013 new tires. Goodyear Wrangler 235-75-15. $89 ea includes mount and balance. Link to comment Share on other sites More sharing options...
Nefarious Posted January 3, 2013 Share Posted January 3, 2013 Fired it up for the first time after all the work I've done over the last couple months. What a good feeling. No leaks in the custom exhaust I made yay! Obx headers with 2" outlets, all custom from there back, 2" y pipe until the merge then 2.5" the rest of the way back, magnaflow hi flow cat, flowmaster 40, to a side exit. Sounds pretty mean, I must say. Link to comment Share on other sites More sharing options...
Nefarious Posted January 7, 2013 Share Posted January 7, 2013 Finished welding up the exhaust hangers for my custom setup, ordered prothane bushings for the front uca and lca. Full poly front after these! Link to comment Share on other sites More sharing options...
ANDY Posted January 7, 2013 Share Posted January 7, 2013 took it to the snow Link to comment Share on other sites More sharing options...
stalker Posted January 7, 2013 Share Posted January 7, 2013 (edited) Replaced all the belts (power steering, AC, and alternator) Also built a storage area in the back cargo spot to bolt my box full of tools and also my amp and sub...my winch also locks into the rear as well so It won't slid around anymore.! Edited January 7, 2013 by stalker Link to comment Share on other sites More sharing options...
Alkorahil Posted January 8, 2013 Share Posted January 8, 2013 Looks like stalker is ready to go anywhere! Link to comment Share on other sites More sharing options...
devonianwalk Posted January 8, 2013 Share Posted January 8, 2013 Looks like stalker is ready to go anywhere! And be heard every where! Link to comment Share on other sites More sharing options...
nunya Posted January 9, 2013 Share Posted January 9, 2013 I put one of my spare Quest-donated coils in, my idle smoothed and he didn't stall on initial start up the AM will be the true test though... Link to comment Share on other sites More sharing options...
Trogdor636 Posted January 9, 2013 Share Posted January 9, 2013 Crawled underneath and looked for a mystery noise. One of my lower links moves side to side quite nicely. It looks like someone tried to use the mount as a jack point at one point in its life. I'm not sure if its the bushing or it just needs to be tightened, I need to jack it up and see. Link to comment Share on other sites More sharing options...
stalker Posted January 9, 2013 Share Posted January 9, 2013 Looks like stalker is ready to go anywhere! And be heard every where! thanks guys, I am taking the Sub and amp out...it takes up too much room Link to comment Share on other sites More sharing options...
stalker Posted January 9, 2013 Share Posted January 9, 2013 Crawled underneath and looked for a mystery noise. One of my lower links moves side to side quite nicely. It looks like someone tried to use the mount as a jack point at one point in its life. I'm not sure if its the bushing or it just needs to be tightened, I need to jack it up and see. don't jack it up on the mount... Link to comment Share on other sites More sharing options...
nunya Posted January 9, 2013 Share Posted January 9, 2013 tis a little chilly out and he didn't do his stupid up/down/up/down/up/putter/up/down idle and didn't make any attempt to stall while pulling out cold wonder if any of my codes cleared too! Link to comment Share on other sites More sharing options...
Trogdor636 Posted January 9, 2013 Share Posted January 9, 2013 Crawled underneath and looked for a mystery noise. One of my lower links moves side to side quite nicely. It looks like someone tried to use the mount as a jack point at one point in its life. I'm not sure if its the bushing or it just needs to be tightened, I need to jack it up and see. don't jack it up on the mount... I would gladly take the blame if I was that person! :o Link to comment Share on other sites More sharing options...
mastersryan Posted January 9, 2013 Share Posted January 9, 2013 My plan was to wake up early to install my 4x4parts.com front skidplate and Westin light bar I ordered from 4x4parts.com that I received 2 days ago but realized they didn't send me mounting hardware like advertised. Has anybody dealt with them before? How was customer service? I have sent an email (yesterday morning) with no response yet. If I don't receive one today by lunch I will give them a call. Other then that I drove my Pathfinder to work today only because my civic's gas tank was on E haha Link to comment Share on other sites More sharing options...
ORCGuide Posted January 10, 2013 Share Posted January 10, 2013 Took it out and rat bagged it around town in the snow. 2High is kinda scary with these Vanderbilt all season radials. 4High is F'n awesome. F#$% I love this thing. So, yeah anyway a half teaspoon of isopropanol, a couple of q-tips and about a half hour of my time seems to have cured my mystery miss. Clean MAF's are good Either that or it was the fasteners that I fabbed up for the air cleaner. Not very scientific of me to change two things at once. . . Link to comment Share on other sites More sharing options...
ANDY Posted January 10, 2013 Share Posted January 10, 2013 cranked my tbars back up, installed moog progressive rear coils and adjusted my headlights. looks good but the ride is stiff lol Link to comment Share on other sites More sharing options...
Trogdor636 Posted January 10, 2013 Share Posted January 10, 2013 installed moog progressive rear coils I'll be doing that tomorrow or Saturday. Be interesting to see how much my stock coils have sagged. Link to comment Share on other sites More sharing options...
stalker Posted January 11, 2013 Share Posted January 11, 2013 installed Warn Premium hubs...my other ones were junk I also took some measurements to fit my spare on the stock tire carrier...need to think of a different idea for the spare, its hangs too low so I am thinking about moving the mount up until I build my bumper... and I got my windshield washer fluid to spray again... Link to comment Share on other sites More sharing options...
mastersryan Posted January 11, 2013 Share Posted January 11, 2013 (last night) I installed a westin safari light bar and 4x4parts.com front skid plate. Hopefully will be installing my lights this weekend along with painting wheels and grill! Link to comment Share on other sites More sharing options...
ANDY Posted January 11, 2013 Share Posted January 11, 2013 I'll be doing that tomorrow or Saturday. Be interesting to see how much my stock coils have sagged. i had them on my 2 door and it lifted it like 1.5 inches but like a year ago, but on my 4 door it gave a bout 1/4 of an inch i think they finally settled but its like 34 inches from the ground to the center of the fenders with 235/75/15 tires but im happy with the out come Link to comment Share on other sites More sharing options...
ORCGuide Posted January 11, 2013 Share Posted January 11, 2013 We got about 8" of snow in the past 24 hours. I felt bad for people not driving Pathfinders Link to comment Share on other sites More sharing options...
Iceman2989 Posted January 11, 2013 Share Posted January 11, 2013 Took it to a local shop and had my front and rear tube bumpers welded on! Nice to finally have some solid protection. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now