dududuckling Posted January 31, 2011 Share Posted January 31, 2011 That is brighter than my PIAA520s!!! And I like the cut offs!!! Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted January 31, 2011 Share Posted January 31, 2011 JDM FTW. Link to comment Share on other sites More sharing options...
esy Posted January 31, 2011 Share Posted January 31, 2011 that is sick as hell! i wish i could get a pair for my pathy. i envy my brother's Q with the HIDs, but those don't have projectors like these badboys do. Link to comment Share on other sites More sharing options...
TooQForYou Posted January 31, 2011 Share Posted January 31, 2011 ^ This is true. I'd love to have projectors for my HIDs! It would make them that much better! Not that they're bad now, it would just be nice to have a crisp cutoff. Link to comment Share on other sites More sharing options...
shift220 Posted January 31, 2011 Author Share Posted January 31, 2011 Holy fskc!! That is brighter than my highbeams and hella 500s combined! So does the HID stay on while the high beams halogens come on? Looks like it from your pic. Nope, they turn off when the highbeams come on. I think the lense gives it a slightly blue tint on the ground. I thought about dual lights but it doesn't seem necessary for these. It's to bad these aren't more readily available, they are a huge upgrade over stock! Link to comment Share on other sites More sharing options...
XPLORx4 Posted January 31, 2011 Share Posted January 31, 2011 (edited) I have mine wired so that the city lights come on with the parking lights, and also so that I can have both the high-beam halogens on with the low-beam HIDs, or with just the high-beams only. I also installed white #194 LEDs as the city-light lamps. On those 6-wire plugs for the motor, I know one is ground, one is +12v (use the parking lamp signal wire), and the other 4 are for each of the positions. I didn't have time to check the plug this weekend to determine which wire is for what signal, but I do know that, for convenience and simplicity of wire routing, I used a CAT5 network cable, and ran that through the firewall to the modified dashboard switch. LOL The switch uses all connections but the gnd signal. Edited January 31, 2011 by XPLORx4 Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted January 31, 2011 Share Posted January 31, 2011 that is sick as hell! i wish i could get a pair for my pathy. i envy my brother's Q with the HIDs, but those don't have projectors like these badboys do. Nope, they turn off when the highbeams come on. I think the lense gives it a slightly blue tint on the ground. I thought about dual lights but it doesn't seem necessary for these. It's to bad these aren't more readily available, they are a huge upgrade over stock! I can source more sets, both for the pre-facelift and facelift R50's. It just takes a few months. Really glad you're enjoying this kit, Andrew. Link to comment Share on other sites More sharing options...
esy Posted January 31, 2011 Share Posted January 31, 2011 I can source more sets, both for the pre-facelift and facelift R50's. It just takes a few months. Really glad you're enjoying this kit, Andrew. yeah, i recall some older threads where you were able to track down a couple sets and how long it finally took you to get yours (i'm search button-literate. haha), but i'm not sure if i want to pay that much. super enticing, but i just don't know. if it were under $1k, i'd definitely consider it, but from the sounds of it, i don't think that'd be the case. Link to comment Share on other sites More sharing options...
adamzan Posted January 31, 2011 Share Posted January 31, 2011 I can source more sets, both for the pre-facelift and facelift R50's. It just takes a few months. Really glad you're enjoying this kit, Andrew. Did they ever make them for the wd21s, Tyler? I thought I saw them somewhere. Link to comment Share on other sites More sharing options...
nunya Posted February 1, 2011 Share Posted February 1, 2011 nice cut-off Me likey Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted February 1, 2011 Share Posted February 1, 2011 Did they ever make them for the wd21s, Tyler? I thought I saw them somewhere. Aftermarket kits only. But never anything factory. Link to comment Share on other sites More sharing options...
E_ROCK Posted April 2, 2012 Share Posted April 2, 2012 Is there a source for just the bare housing/lense and not the guts? I already did a HID projector retrofit (from www.retrofitsource.com) in my stock '96-'99 housings and vacu-formed some new clear lenses but I'd like the look a little cleaner and the JDM lense/housing looks good. eBay appears to only have complete sides which I neither need nor will pay for. Thanks. Link to comment Share on other sites More sharing options...
dynomax Posted April 2, 2012 Share Posted April 2, 2012 ...been wondering how these would look mounted up and glowing. Must be patient... Hey, I like your sig pic... but is it just me or is a headlight out in that pic... its been bugging me for awhile ... not sure if its an optical illusion or really out Link to comment Share on other sites More sharing options...
TShep704 Posted April 3, 2012 Share Posted April 3, 2012 (edited) pleaseeee please please let me buy the stock headlight assemblies! Edited April 6, 2012 by TShep704 Link to comment Share on other sites More sharing options...
4doordrift Posted April 3, 2012 Share Posted April 3, 2012 Did you say you can source some quality Post-facelift r50 units? Link to comment Share on other sites More sharing options...
Kyle94 Posted December 6, 2013 Share Posted December 6, 2013 Please...... Link to comment Share on other sites More sharing options...
Kyle94 Posted December 6, 2013 Share Posted December 6, 2013 http://www.ebay.com/itm/NISSAN-TERRANO-1995-RIGHT-HEAD-LIGHT-ASSEMBLED-1010800-/331070428318?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d1555d49e&vxp=mtr http://www.ebay.com/itm/NISSAN-TERRANO-1998-Left-Head-Light-Assembly-0710900-/321259853474?pt=Motors_Car_Truck_Parts_Accessories&hash=item4acc9456a2&vxp=mtr Link to comment Share on other sites More sharing options...
ferrariowner123 Posted December 6, 2013 Share Posted December 6, 2013 Those are total rip off, I just bought a set of updated model projectors for the price of one of those. Yahoo Auctions for the win! PM Kyle, I'll put you in touch with a guy who will import some JDM projectors. -Kyle Link to comment Share on other sites More sharing options...
96Pathfinder4x4 Posted December 11, 2013 Share Posted December 11, 2013 For $500. Just mount an LED bar. 0_0 Link to comment Share on other sites More sharing options...
nunya Posted December 11, 2013 Share Posted December 11, 2013 Sometimes to some people form is just as much important a factor as function. 1 Link to comment Share on other sites More sharing options...
linkinpark Posted December 11, 2013 Share Posted December 11, 2013 I have a set. They look great and function even better. I also have 4 LED fog lights. Two in the front and two for reverse lights. Then I just ordered 4 7inch HID fog lights. So I will light up the night now. 1 Link to comment Share on other sites More sharing options...
96Pathfinder4x4 Posted December 11, 2013 Share Posted December 11, 2013 Sometimes to some people form is just as much important a factor as function. I won't spend money on form, if the function can be had at a better price. ...frugality is one of the reasons I do all the work myself if I can do it. Link to comment Share on other sites More sharing options...
ferrariowner123 Posted December 11, 2013 Share Posted December 11, 2013 (edited) I won't spend money on form, if the function can be had at a better price. ...frugality is one of the reasons I do all the work myself if I can do it. Some people like the stock look, i am one of them, you have your ideas of what works, i have mine, personally, i think having auto leveling FACTORY HID's will look way cleaner than a light bar... -Kyle Edited December 11, 2013 by ferrariowner123 Link to comment Share on other sites More sharing options...
XPLORx4 Posted December 12, 2013 Share Posted December 12, 2013 Or, you can just have both. https://www.facebook.com/photo.php?fbid=565256413488170&l=8b6d9209b9 3 Link to comment Share on other sites More sharing options...
linkinpark Posted December 12, 2013 Share Posted December 12, 2013 What's the led bar you have? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now