01Pathmaker Posted March 2, 2019 Share Posted March 2, 2019 20 hours ago, Sjackson2 said: The iacv fry your ecu? Yep Link to comment Share on other sites More sharing options...
Slartibartfast Posted March 2, 2019 Share Posted March 2, 2019 New battery. I think I had the wipers on my '95 do that once. It was a long time ago but IIRC I just cleaned up the hubs (removed the soft metal that had worn off the arm and fouled the splines) and tightened it back down and it held just fine after that. Link to comment Share on other sites More sharing options...
onespiritbrain Posted March 2, 2019 Share Posted March 2, 2019 I was doing maintenance checks and planning little repairs like new mirrors, bumper, detailing, and all that jazz. Prom is coming around the corner and I had a really cool idea planned out to propose involving my car, but unfortunately my girlfriend broke up with me today - so it's just a fantasy nowDodging bullets like Neo Link to comment Share on other sites More sharing options...
RedPath88 Posted March 2, 2019 Share Posted March 2, 2019 Changed the oil, after a run back to Autozone when the second filter came in. Link to comment Share on other sites More sharing options...
PathyDude17 Posted March 2, 2019 Share Posted March 2, 2019 Got a transfer case skid plate off a WD21 and a black honeycomb grill for a total of $9! Just need to drill in my old Nissan logo. For whatever reason the black grill looks better in person than in picture. 2 Link to comment Share on other sites More sharing options...
RainGoat Posted March 2, 2019 Share Posted March 2, 2019 Yeah, I really like those SE grills. Link to comment Share on other sites More sharing options...
PathyDude17 Posted March 2, 2019 Share Posted March 2, 2019 1 hour ago, RainGoat said: Yeah, I really like those SE grills. Me too. Definitely look better than the late model ones imo. Couldn’t find a white one in the JY but black is just as good Link to comment Share on other sites More sharing options...
PathyDude17 Posted March 3, 2019 Share Posted March 3, 2019 All done! I think it looks good. Really glad I found out about the WD21 transfer case skid plate compatibility. Saves me the time and work of putting something together for that rear section. 2 Link to comment Share on other sites More sharing options...
JamesRich Posted March 3, 2019 Share Posted March 3, 2019 On 3/1/2019 at 9:17 AM, mjotrainbrain said: Isn't Windrock near or in Tennessee? You could attend WENT Windrock this fall and wheel with a bunch of other Nissans! I always wanted to drive down to that event. I'll have to do some searching, so far I don't know where much is up here! I live in Grandview and work in Lenoir city. slowly learning in between! I definitely plan to do some fishing up here! James 1 Link to comment Share on other sites More sharing options...
Slartibartfast Posted March 3, 2019 Share Posted March 3, 2019 Worked some more on my overkill sheet metal steering column clamshell, and I'm pleased with how solid it is now that I've got all the mounts worked out. I'm hoping a couple coats of bedliner will hide my various crimes against geometry. 2 Link to comment Share on other sites More sharing options...
Sjackson2 Posted March 3, 2019 Share Posted March 3, 2019 Finally got rid of the stupid horns on the hatch today!! After 1 Link to comment Share on other sites More sharing options...
RainGoat Posted March 3, 2019 Share Posted March 3, 2019 For the PNW Pathfinders, yesterday started as the Silver Pathfinder Emporium & developed into a full on SwinGateFest 2019. Thanks to @02_Pathy &[mention=39745]stpickens[/mention] and his Dad for coming up from Portland. Also, thanks to[mention=32880]ferrariowner123[/mention] for just stopping by to hang out. Most of all, thanks to[mention=37543]TowndawgR50[/mention] for providing the venue, expertise, product development, hard work and good cheer! It really couldn’t have happened without him. 6 Link to comment Share on other sites More sharing options...
03TroutFinder Posted March 3, 2019 Share Posted March 3, 2019 Replaced the roof mounted off road lights and completed fabrication/mounting for new rear bumper!Sent from my SAMSUNG-SM-G930A using Tapatalk 5 Link to comment Share on other sites More sharing options...
Sjackson2 Posted March 4, 2019 Share Posted March 4, 2019 4 hours ago, 03TroutFinder said: Replaced the roof mounted off road lights and completed fabrication/mounting for new rear bumper! Sent from my SAMSUNG-SM-G930A using Tapatalk Dammit!! I need to learn to weld so I can have cool @!*% like this!!! 2 Link to comment Share on other sites More sharing options...
Jack9909 Posted March 4, 2019 Share Posted March 4, 2019 On 3/1/2019 at 3:39 PM, Sjackson2 said: got any pics of cleaning the crank sensor? It really made that much of a difference? I'll add a pic to this post but it's on the bottom of the bell housing with a little metal cover, and a big weird push connector and one 10mm bolt holding it all on, my engine seemed to rev up and down sluggishly before and when I took it out it had a bunch of shavings on it and a little bb sized chunk of metal, hope it's nothing major but I assume all that crud was messing up the reading, haven't been able to drive much as I'm waiting for the rain to pass to finish welding my exhaust together. Weather is absolutely awful in virginia right now grr In recent news, attempting to make a y pipe and putting a little cherry bomb turbo on the truck, gotta give the tiger a good roar lol Link to comment Share on other sites More sharing options...
Sjackson2 Posted March 4, 2019 Share Posted March 4, 2019 1 hour ago, Jack9909 said: I'll add a pic to this post but it's on the bottom of the bell housing with a little metal cover, and a big weird push connector and one 10mm bolt holding it all on, my engine seemed to rev up and down sluggishly before and when I took it out it had a bunch of shavings on it and a little bb sized chunk of metal, hope it's nothing major but I assume all that crud was messing up the reading, haven't been able to drive much as I'm waiting for the rain to pass to finish welding my exhaust together. Weather is absolutely awful in virginia right now grr In recent news, attempting to make a y pipe and putting a little cherry bomb turbo on the truck, gotta give the tiger a good roar lol Ah ok...so pretty easy to get to then. What did you clean it with? Just some brake parts cleaner? Im gonna have to give that a go Link to comment Share on other sites More sharing options...
Jack9909 Posted March 4, 2019 Share Posted March 4, 2019 (edited) 2 hours ago, Sjackson2 said: Ah ok...so pretty easy to get to then. What did you clean it with? Just some brake parts cleaner? Im gonna have to give that a go Yup, sorry I'm not much of a describer lol but yeah brake clean and wipe it all off with a rag. That little green connector in the picture near the oil pan. Edited March 4, 2019 by Jack9909 Link to comment Share on other sites More sharing options...
Sjackson2 Posted March 4, 2019 Share Posted March 4, 2019 (edited) 1 hour ago, Jack9909 said: Yup, sorry I'm not much of a describer lol but yeah brake clean and wipe it all off with a rag. That little green connector in the picture near the oil pan. might be a stupid question but do you have to drain the tranny first? Edited March 4, 2019 by Sjackson2 Link to comment Share on other sites More sharing options...
Jack9909 Posted March 4, 2019 Share Posted March 4, 2019 might be a stupid question but do you have to drain the tranny first? Nah it's in line with the flywheel, when you take it off you can see the teeth the starter uses, pretty neat inspecting through where it goesSent from my Moto G (5S) Plus using Tapatalk Link to comment Share on other sites More sharing options...
Sjackson2 Posted March 4, 2019 Share Posted March 4, 2019 Just now, Jack9909 said: Nah it's in line with the flywheel, when you take it off you can see the teeth the starter uses, pretty neat inspecting through where it goes Sent from my Moto G (5S) Plus using Tapatalk perfect! Thanks man. im not having any problems, but the rig has quite a few miles and im always down for cleaing or replacing anything i can Link to comment Share on other sites More sharing options...
Jack9909 Posted March 4, 2019 Share Posted March 4, 2019 perfect! Thanks man. im not having any problems, but the rig has quite a few miles and im always down for cleaing or replacing anything i can No problemo always glad to help out people when I can =D , I'm the same about my truck lol if I can find something and clean it ill go for it Sent from my Moto G (5S) Plus using Tapatalk Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted March 5, 2019 Share Posted March 5, 2019 I'll have to do some searching, so far I don't know where much is up here! I live in Grandview and work in Lenoir city. slowly learning in between! I definitely plan to do some fishing up here! JamesJoin the NOAS Facebook groupSent from my SAMSUNG-SM-N920A using Tapatalk Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted March 5, 2019 Share Posted March 5, 2019 Cardboard assisted designI will be switching to quarter inch plate for the frame bracket for the winch plate. Sent from my SAMSUNG-SM-N920A using Tapatalk 4 Link to comment Share on other sites More sharing options...
NIssanBoston Posted March 5, 2019 Share Posted March 5, 2019 God i hate rust..Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
mjotrainbrain Posted March 5, 2019 Share Posted March 5, 2019 45 minutes ago, NIssanBoston said: God i hate rust.. Sent from my iPhone using Tapatalk Word. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now