nunya

MY1PATH I believe made a sneaky snorkel... I'm on my phone waiting for a rad for a cobalt, if someone else don't chime in before I have more free time I'll search it for you

CarQuest labeled DOT3, because we buy it in gallon jugs at work. No other reason than it's just what we always have on hand and never had an issue with it

It's the switch for locking the inter... what else would it be? (Yea, it just cancels the clutch safety switch so you can crank er over without the pedal on the floor)

Members rides

The way it's "trimmed" looks like someone was making easier access for a starter job or less knuckle scraping when reaching for the oil filter

The Krylon Touch

sounds like a nunya bribe!

Yea, mobile searching (searching in general or that matter) can be a little "off" at times there are situations to can wander into 90-95 wd21 stuff as well for help, this is one of those situations. Now if you ask about what size tire you can fit... That's a different story Kyle, old or new "chevy Toyota and Nissan with 6 lug" is vauge and leaves a lot open. A 70s chevy wheel will have the same smaller hub bore as an 06 H3. We can't read minds so we don't know you meant old rusty aftermarket wagon wheels

This has been covered a few times... Not all 6 lug wheels are created equal and as strait forward as Kyles post would suggest in a quick glimpse. Your lug pattern is 6x5.5, some newer nissans have a smaller lug diameter and will not work-and some have a smaller hub bore that would need modified to fit a wd21 (a couple members here have had to modify to fit xterra and frontier wheels). A 1/2 ton suspension 4x4 GM pickup/SUV (silverados, tahoes, h3s, etc...) also shares the lug pattern but again a factory wheel from one of them will need the hub bore modified to clear a wd21 hub. Some Toyota 4x4s share the lug pattern (as do other import 4x4s of the time) but some will require a new set of lug nuts to acomidate a different seating pattern. Now if one of the above mentioned has a set of aftermarket wheels, they usually have a larger hub hole to acomidate many applications

fleurys makes quality stuff that's lasted years on my truck, with my only issue being my own fault with an ice scraper (and priced good to boot!)

I heard my name! 1st welcome to NPORA and eventually here to the USofA bud 2nd on the "drive it to the gate" option, being ignorant to the ways of Barcelona I will use a local to me way of looking at it. An unregistered vechile on the street is asking to get towed by the police to an impound lot. Now the parking garage sounds to be a private owned structure so with permission of the owner/manager moving around with no registration a non-legal matter. Now for the towing it out of the garage situation. From experience having towed many no starts/inoperables out of parking complexes, a flatbedtiltbed truck is NOT going to happen. A wheel lift truck CAN though, just keep the wheel lift low to the ground so the tires are bairly off the ground and SAFETY STRAPS!!! (And don't let them touch it with a sling setup, factory wd21 bumpers are basically cosmetic appendages to begin with, a sling will pretzel the marker light mount bar unless the driver is good with wood-and not like that people who know me )

I complain when it's perfect outside, I like hearing my own voice

What's double didget mpg? MY1PATH took the words from me and placed them in a more legible manner than I would have (wouldn't hurt to check and see if you got any codes stored in the computer as well)

Or the gear on the transfer case end of the cable was possibly switched (who knows what repairs a previous owned has made). I swear there was talk somwwhere around here with a breakdown for the tooth count/tire size on the gear, I honestly ain't in the mood to hunt at the moment though. I may look later

There's been talk of it, but no confirmation on it being completed (if I find a bench seat I like I may though. That's more fun than stuff I probably "should" do )

They make paint if you can only find chrome and it ain't your flavor. I actually suggest chrome handles to those who have issues breaking the black plastic ones

I have heated mirrors on WhiteOwl, he ain't pre wired for them and I haven't really cared enough TO wire them in. Probaly should do that... Meh, effort I can place on something pointless

or maybe "L"

Sometimes to some people form is just as much important a factor as function.

I think the closest your going to get is "HEMI HEAD 426". That's the best I could find when I attempted playing with photo editing programs.

Springs coming... Never know what can end up in some peoples junk yard treasures (I am usually happy to search others needs as are many other scavengers on here)

I swear I remember reading about people having rusty fuel filler necks on here having a fuel smell as bushnut said. I personally just had to replace the fuel cap on my 88 wd21 due to it starting to fail and exhaling some strong fumes as you would walk past the gas door as well.

It's because your a girly man now

Guess that would make sence to specify the "good" one to have is the factory one. Aftermarkets always bring less for some reason (generally the smaller core most have as you said with the magnaflow). Yea, amazing the difference being able to ACTUALLY exhale makes!

Dam, scrap price sucks there! thats a 3 digit cat here as a partial with the guy that buys the ones we save from cars we junk here. Just wait, he's old and slow. He'll be here to yell about not feeding your cat