Sjackson2

The maxima remotes will work on r50s

I wouldn’t risk frying the ecu on gasket maker

Any more questions feel free to ask. I just recently did all the intake gaskets and pcv and everything in mine

Man that looks really nice

I’d leave the lower plenum alone unless you plan on changing manifold gaskets. And here’s a link for the gasket https://www.partsgeek.com/catalog/1996/nissan/pathfinder/fuel_injection/idle_valve_gasket.html and like sartorial said....clean the egr and the maf

Also....replace the iacv gasket while you’re at it

Oil in the throttle body and intake is pretty common due to the pcv system. It doesn’t necessarily indicate a problem. However....a failed pcv valve can cause all kinds of problems. Clean the throttle body and intake plenums thoroughly with throttle body cleaner and replace the pcv valve. Check for vacuum line cracks and leaks as well

just do the resistor and tape it up good with electrical tape and put wire loom back around it. youll never be able to tell

Looks nice! Why not bring the black down onto the front bumper a bit to finish off that fender flare look? What wheel are those? I really like them!!!

I personally hats those stock pathy wheels!! Lol. I think they look better in black

you have to reset the window limiter. here you go https://www.google.com/search?q=reset+window+limiter+2001+pathfinder&rlz=1C1GCEA_enUS806US806&oq=reset+window+limiter+2001+pathfinder&aqs=chrome..69i57.8367j0j7&sourceid=chrome&ie=UTF-8

yep.you can spray it with some silicone lube and work it back and forth a bit.. sometimes the spring gets overly compressed too and doesnt contact all the way and you can fix that by making a shim. ive heard of people gluing pennies to the door frame so it pushes the spring in farther

I like it

Open doors one at a time a push the plunger in and see if you can get the light to go off. If it does....that’s your door.

Lr direct has the landover springs for 70 bucks shipped

Is one of your door switches not getting fully depressed.

Nice!!

Sounds good!

I plan on going with ac springs in the front and Lr nrc9447 in the rear with kyb excel struts and 2001 f250 shocks our back

If I remember right....I think I remember someone saying you could use a passenger seat and attach the drivers side seat mount to it and it works fine

https://www.amazon.com/Genuine-Nissan-Positive-Terminal-Connector/dp/B01F9MV9YE

you talking about this part? https://www.ebay.com/itm/OEM-Nissan-Fusible-Link-Battery-Fuse-24380-89914-Pathfinder-Armada-Frontier-Xt/273760562921?hash=item3fbd66aee9:g:GcIAAOSwA~1bpPa1

probably have to snag a fusible link from a JY

https://www.autozone.com/batteries-starting-and-charging/battery-cable/duralast-battery-cable/570486_309932_0

just pop that ammeter out of there and put in a bosch water or oil temp gauge, or something