Jarsiff

Congrats dude! :worthless:

or dont bother taking the wheel off and pop the center cap out and play with it?

smart move there, ive experienced an airbag, and while its better than the alternative.....it doesn't feel good at all hehe

I thought the point of a "plenum spacer" was to open up the air chamber before it gets to the lower im, in that case for the 3.5 you would need the 2 gaskets for where the upper plenum meets the lower one, which is probably why nobody makes one already even if you raised the plenum a half inch the only space would be created where the two halves meet and i dont think there would be any gains there, def not for the money involved. but if someone can prove me wrong there that would be awesome! good luck to ya

I doubt the wiring harness would be the same in the z as the pathy besides if there is a difference im sure its tuned differently...as far as the other before you drop coin on the ecm have you done some of the preventitive stuff like tune up and clean the maf maybe? i've never heard that complaint before either but I like to start with the cheaper fixes and work my way up, lol

I will say that the wood grain is not my thing either but that looks really good with your setup, i'd also like to know how you got it in there without messing up the airbag.

Awesome guys! Congrats!

congrats man thats cool.

oh dear god that was hard to listen to, I bet slater over there was having a hard time not slapping her....heh but that map totally made up for it with me as I was also laughing hysterically....good stuff, sad but good stuff.

holy super triple post batman! hehe I will hopefully be ordering soon, I just wanted to thank you for your effort, looks like an awesome product with a great price!

The intake manifold for the 350z and our pathys is alot different, what they did is assume that all the 3.5's do in fact have the same IM and list all models that came with that engine...kinda shows rushed and shoddy salesmanship in my opinion and they should check their facts, ps i think ive said this before but im no expert here, from the IM's that I have seen, they look nothing like mine so i think this is a false ad.

sorry bout that, i saw wrench and assumed bolt head. oops

Excellent! those really look good! are they weld or bolt on and do you know what the price is going to end up being?

Your right the front will take regular non lsd oil, as far as which wrench, if you can see it just grab 3 or 4 that look close and give it a try.

thanks glad I could help

I know you probably wanted pictures and part numbers here but I dont have that right now, I do hope this helps out and if anyone can add to this please do, and if someone else wants to try to clean this up for a proper how too, please feel free i'll try to be here for any questions too.

No torque they're just tiny brass phillips screws that need to be tight. and 88 HOLY CRAP whos engine was that?? bet that thing made some noise eh? sorry i havent checked back in here for a while, having also done this myself if I can be any help let me know

so the vents come out in one piece with the bezel? In my maxima the vents were seperate and had to pop out first to reveal two more screws for the center section. good to know

that looks really good actually, if there was some way to attach it to the roof rack that might be a lot easier to work around, but yea I like it a lot

I can attest to that, Ive got a few goood scratches from the old "lets see whats up there....looks like it hasnt been driven in years" I was told they would buff out but boy can you see em LOL

also just so you know (and correct me if im wrong here) from what I have read on here you cant use the manual hubs with the all mode 4x4 due to sensor issues..... i think it was anyway.

how much are they willing to proto and fab for the R50, if I could I would drive my happy arse down there just for that if there was other stuff in the works i might be able to make a trip out of it.

heheh oh but how i looove my caR50 and all the things it could become

i kinda figured that was going to be an issue, but like I said I dont have much slack there and the biggest thing i wanted was to see if someone here had any interest first, wow, you got a sweet deal man, it took me forever to find something under like 17-19k, they were a lot harder to find over here too, no one wants to sell em once they get hold of em, LOL