jreidg3

Our first winter with a 2001 pathfinder was a nightmare with the windows, especially when trying to get coffee at the drive through window in the morning. After three trips to the dealer to "lube" the track, they finally replaced the drivers side window molding and and has never acted up since then (going on one year now).

Response from Skunk2: Thank you for contacting the Helpdesk at Skunk2 Racing. The Skunk2 Plenum Spacer was made for the 350Z and G35, so those are the only chassis we can guarantee that plenum spacer will work with. Any other chassis that use the VQ35 may have clearance issues when using our plenum spacer. If you have any more questions regarding Skunk2 products or policy please let us know. Thanks. Brian Nichols Customer Service Skunk2 Racing 2050 5th St. Norco, Ca Thanks for using the help desk, if you have any further difficulties or are required to respond to your request, please login to the help desk _______________________________________________ Was this response helpful? We would be grateful if you would submit a short rating for this response as part of our satisfaction monitoring. http://www.skunk2.com/cgi-bin//pdesk.cgi?d...;key=gtmI93fH0m

I just submitted a ticket with Skunk2 to have them verify if this will fit our truck.

Ok so I got the digicam out and looked all around for the PCV valve. I took a picture of what I thought was the pcv valve however it looks like just an open tube to me. Please follow the link below and let me know if this is a picture of the pcv valve on a 2001 pathfinder. In addition the pCV valve from Advance auto parts is threaded on on end with a nut in the center for tightening it down. http://jreidg3.googlepages.com/home Thanks, Josh

In addition I found this other site on the net offering a plenum spacer that they SAY fits the pathfinder. http://www.intensepower.com/skinpl5vqsp3.html

Hello, I really like the look of the 02-04 roof racks. Esp the ones that say PATHFINDER on the side and NISSAN on the front above the drivers side. Does anyone know if these 02-04 racks will bolt onto my 2001 LE ? Thanks, Josh

I have been looking around the net for Mods for my 2001 LE Pathy. I came across the following: http://www.sfxperformance.com/parts/SK2307070400.htm Anyone Installed a Plenum Spacer on their 01-04 Pathy? Is it worth it? HP increase? MPG increase? etc... Thanks, Josh

Ill take the RSX's off your hands. Let me know how much to ship to zip 14072.

Should I be looking on the drivers side rear or passenger side rear?

Does anyone have instructions on how to replace the fuel filter on a 2001?

Does anyone know where the PCV valve is on a 2001 pathfinder?

ill be back home in a week. Ill take some pics and post them to show you what it looks like. thanks, josh

wow $108 a piece. thats seems steep. I bought my truck from a lexus dealer certified used with a 4 year bumper to bumper warranty. I am going to go back and complain and see if they will share some of the cost with me. if not ill look into getting the parts from Nissan and doing the job myself. Thanks for all the info!

Thats good to know. So if I have a 2001 Pathy I should look for a 2003 QX4 steering wheel so my pathy airbag will fit. thanks!

I would get the same year QX4 steering wheel. 2001. Thanks for the confirmation. Ill keep looking for a steering wheel to match my tan leather interior. Thanks.