Leaderboard

Been awhile since I've been on here. Truck is still alive and did some more maintenance like new wheel bearings, U joints for the front driveshaft and brake caliper. Also I was able to pick up some HID retrofits off a guy who was parting out his R50 with a ton of other goodies. After installing the retrofits the clear corners seemed off to me so I went ahead and used a heat gun to melt the glue to take them apart and painted the inside gloss black. Imo it looks a lot better Sent from my SM-G960U using Tapatalk

Thanks guys. I appreciate the comments. I'm very happy with the outcome. SJackson & Mojotrainbrain- Lol, yeah I've gotten a little carried away since I initially posted thus thread. Honestly wasn't sure I would have it this long, but have grown to love it. Keeps me from pulling the trigger on a Tundra, which I was planning to buy 2 years ago. Onespirit- Yeah, that's North Hall park. Just a couple miles from the house and I like the back drop! Spent the majority of the day installing the vinyl flooring and putting the interior back together. The vinyl was a challenge and made a few cutting errors despite the time and thought I put into it. Came out ok overall though. Sent from my SM-J327P using Tapatalk

installed a CB radio and antennae. Cheap uniden unit off of amazon and a 4 ft firestik antennae on the roof rack. Built a crude swivel mount (thanks @micahfelker for the brainstorming help) with clevis pins so that it can lock at a 90* angle or fold down for parking in the garage. I stuffed the actual radio in between my driver seat and center console, it sits almost flush with the level of the seat, then I can swivel it up for a better look at the buttons. I also did my power valve screws, they were all still there! Thanks @02_Pathy and @Astrorami for the help.

They took my parking spot [emoji2369] Sent from my SM-G960U using Tapatalk

You really need to work on your parking. I don’t think you’re doing it right [emoji23]

Crawled over some cars today at a local 4x4 event. Made it all the way through Sent from my SM-G960U using Tapatalk

The way I have them mounted, they could not work better. Perfect step up to the roof rack or a good middle step to get to the top of the tire. My shorter (5’0”-5’-6”) friends use them to get in and out of the car, at 6’3/4” (that’s the height on my medical documents) they’re a little awkward to use and I usually step over them. Ultra perfect placement in my opinion

Ya, that price is only for install. The sliders that I bought were the trail gear 67” DIY kit, ran me $250 on amazon

I believe that was only for install. Lol

Sliders look good mate! Can’t wait to see em in action.

I’ll never surpass your lightbar superiority

Thanks my dude! Itll happen one day Sent from my SM-G960U using Tapatalk

Someday I want to be like you. Looking good as always dude

Thanks! I’m trying to have fun with it, the biggest thing is I love the places it takes me and the people it’s introduced me to!

Nice rig man. Coming along very nicely! Thanks for sharing your build with us. Sent from my SM-J327P using Tapatalk

I’ve used this inexpensive one. It hasn’t bothered my wife & holds an iPad well Seat Bolt Car Mount Tablet Holder for Tablets with Anti-Vibration Goose Neck [Jarv] $25.99 at Amazon

Those sliders look nice. Curious, if a Custom Bumper is only $350, what did the sliders cost?

@!*% sorry mates didn't realize I'm an idiot. Should be fixed now see above. Pathy is 31" KO2s, KYB / AC Springs in the front, and Bilstein 5100s / LR Springs in the back. Nothing crazy. Lots got stuck here

Sounds like a good trip, if you go past Grand Rapids MI wave hi!

tomorrow morning we leave for the pinky of Michigan from North Jersey for a week long trip. all our stuff in there for four people and two dogs god my phone takes such sh***y pictures i also decided to wrap my steering wheel in paracord and didn’t have enough so i’m multicolored and i finally finished the light switch mount ! Sent from my iPhone using Tapatalk

Big booty. Sent from my iPhone using Tapatalk

With the new toy. -Kyle

Successfully completed the Whipsaw trail on Canada Day Long Weekend. Land Cruisers, Tacos, 4Runners, and Jeeps getting stuck but not Pathfinder. Any Idea why the site says " You can only upload a total of 0MB."? How do I contact the admin? Thanks, Tomek EDIT - attempt off dropbox. Hope it's not too many pic for you guys! Sticking to just the Pathy ;)_ Hope you dig! I know we had a blast. If anyone of you want to make it up to BC and have a rip at it, hit me up! Friend's stuck Jeep Getting Ready to pull it out Made it up with some guidance some of the stuff we were up against Lost a left flare, but who cares, least of my worries!

I mounted my Bluetooth stereo head unit back inside of the dash and made a plate to put in the hole where the radio should have gone and I mounted the tablet to it.

Sliders are on! Can’t wait to try them out

96Se 97Q Sent from my SM-S737TL using Tapatalk

Popped by the paint shop to check on the Troutfinder and it was done, so I brought her home and put her back together-Mostly! Complete color change. Color is Thunder. Toyota color from the 2018 Toyota 86. Pre-pictures are over in the Garage forum. Really like the outcome. It came out Sick! More of the blue comes out when in the shade as can be seen in some of the pics. They were supposed to leave the decals off of the back. I was gonna paint them flat black or just leave them off. Gonna have to prep them and spray them black now! Daylight was running out, so I still have to put the rear tire, jack and rod cannon back on. Although I'm debating the cannon or switching over to an awning. Next up: -Put the interior back together -Build custom slim line nerf bars from stock mounting hardware. -Cleaning and painting the under carriage black including visible exhaust piping, accenting some pieces in Red. -Detail the engine and engine compartment-Blackout with Red accents.

Damn only 350 for a custom bumper?

Sliders go on July 1, local fab shop is two weeks out. Gusset kit arrived yesterday. I could also see them making me a front bumper here soon, I was quoted about $350. Also working towards getting my own mid skid plate made.

Finally finishing up my pathy build. D44's front and rear, ballistic fab chromoly joints, ballistic coil mounts and coil buckets, 5.13 gears, bronco 5.5 lift coils and a bunch more goodies.