txpath4x4 Posted November 30, 2014 Share Posted November 30, 2014 Hey guys I need to know out there anybody with standards what they did for aftermarket cupholders I am tired of my seat getting wet with my drink. I have seen with automatics they just get the Walmart center console and put it there where the brake is but was standards you can't do that because you need your brake. Please help!!!!! Link to comment Share on other sites More sharing options...
Bubbley11 Posted November 30, 2014 Share Posted November 30, 2014 I have two mounted onto my arm rest. Not the best looking thing but it seems to work well enough. Link to comment Share on other sites More sharing options...
Craig1902 Posted November 30, 2014 Share Posted November 30, 2014 mounted 1 on the center console lid, screwed it onto a small piece of sheet meat (cut to fit from an old computer case) then epoxied that to the top of the console lid. took a bit of getting use to as it sits a bit further back than is natural but is fine now i'm use to it Link to comment Share on other sites More sharing options...
gv280z Posted November 30, 2014 Share Posted November 30, 2014 SUP MAN!?! You know, when I first read this I was like...damn fool, I got you covered! And then I read a little further and when you first mentioned "People with standards" I thought you meant like, class and good taste, hehe...Still though I wasn't worried, for I knew you'd be happy with my cupholder system....and then I got to the automatic and E-brake part...hmmmm....then I got it, it's been soo long since I've owned a stick shift I forgot you actually DO use the parking brake! Heh...sooooo....all I've got for you are those stupid little things that slip down inside your window slot. I think some guys use a drink holder that plugs into the ashtray holder too. Here you go, a little pricey...but looks good: http://www.andysautosport.com/products/autoloc__BWCH.html That's all I can find Bro. Seriously. 1 Link to comment Share on other sites More sharing options...
nunya Posted November 30, 2014 Share Posted November 30, 2014 Jeep Grand Cherokee center console swap 1 Link to comment Share on other sites More sharing options...
djeffrey Posted November 30, 2014 Share Posted November 30, 2014 http://www.amazon.com/gp/aw/d/B000FGIBYQ/ref=pd_aw_fbt_auto_img_3?refRID=1596R9V9G7VJDXZJ2RWQ I used this. Fits so darn perfectly between the shift boot and little tray thing below the e-brake. The center coin holder let's the e-brake handle drop right in. It fits snugly, never moves, I didn't use the screws or strap it came with, just nudged it in there and it stays. I would post a pic but my inside isn't functional since I'm swapping the tranny today. I bought it at pep boys I think. It doesn't stand out, doesn't look cheesy, and holds our damn drinks!!! Link to comment Share on other sites More sharing options...
txpath4x4 Posted December 1, 2014 Author Share Posted December 1, 2014 Thanks guys !!! Link to comment Share on other sites More sharing options...
k9sar Posted December 1, 2014 Share Posted December 1, 2014 I married my cupholder. The seat doesn't get wet with my drink anymore but I get this strange screeching sound from the passenger seat when I drive in traffic. I had solved that problem with the anti-screech knob on my radio but, now that my radio has completely failed, I'm thinking the spilled drinks are a better option. 3 Link to comment Share on other sites More sharing options...
nunya Posted December 1, 2014 Share Posted December 1, 2014 I married my cupholder. The seat doesn't get wet with my drink anymore but I get this strange screeching sound from the passenger seat when I drive in traffic. I had solved that problem with the anti-screech knob on my radio but, now that my radio has completely failed, I'm thinking the spilled drinks are a better option. Bravo good sir! Link to comment Share on other sites More sharing options...
vagabond Posted December 2, 2014 Share Posted December 2, 2014 http://www.amazon.com/gp/aw/d/B000FGIBYQ/ref=pd_aw_fbt_auto_img_3?refRID=1596R9V9G7VJDXZJ2RWQ I used this. Fits so darn perfectly between the shift boot and little tray thing below the e-brake. The center coin holder let's the e-brake handle drop right in. It fits snugly, never moves, I didn't use the screws or strap it came with, just nudged it in there and it stays. I would post a pic but my inside isn't functional since I'm swapping the tranny today. I bought it at pep boys I think. It doesn't stand out, doesn't look cheesy, and holds our damn drinks!!! Looks like the one in the wifes 94 pathy. My 88pathy has a QX4 center console in it, slight mod to the P brake, slotted for the seat belt looks good Link to comment Share on other sites More sharing options...
Eyrish Posted December 3, 2014 Share Posted December 3, 2014 Yup, find a junk yard console and swap it. Link to comment Share on other sites More sharing options...
gv280z Posted December 4, 2014 Share Posted December 4, 2014 (edited) Dude Nissan jipped you on your E-Brake! Or is yours up under the dash like my 91 HB was....That little 12 valve 4 banger truck was fun to drive! Damn I miss my little truck. I miss all my cars..actually, except for the Rabbit...don't miss that one. Oh and the Pulsar...that car sucked. Edited December 4, 2014 by gv280z Link to comment Share on other sites More sharing options...
jerrynorton Posted December 4, 2014 Share Posted December 4, 2014 > Yup, find a junk yard console and swap it. Wow. That's great. What year/trim/model is that out of? The cup holder inside the console is so wimpy compared to the way they mount them everywhere nowadays. I actually used carbon fiber and epoxy to repair it and little bits of it have still broken off. It's so brittle. Link to comment Share on other sites More sharing options...
Eyrish Posted December 5, 2014 Share Posted December 5, 2014 Dude Nissan jipped you on your E-Brake! Or is yours up under the dash like my 91 HB was....That little 12 valve 4 banger truck was fun to drive! Damn I miss my little truck. I miss all my cars..actually, except for the Rabbit...don't miss that one. Oh and the Pulsar...that car sucked. Haha, ebrake is there, but you have to move it a couple cm's over. Link to comment Share on other sites More sharing options...
Eyrish Posted December 5, 2014 Share Posted December 5, 2014 > Yup, find a junk yard console and swap it. Wow. That's great. What year/trim/model is that out of? The cup holder inside the console is so wimpy compared to the way they mount them everywhere nowadays. I actually used carbon fiber and epoxy to repair it and little bits of it have still broken off. It's so brittle. It's out of a '98 pathfinder. Link to comment Share on other sites More sharing options...
Eyrish Posted December 5, 2014 Share Posted December 5, 2014 Better view.. The integra seats are a big improvement 1 Link to comment Share on other sites More sharing options...
RedPath88 Posted December 5, 2014 Share Posted December 5, 2014 http://www.amazon.com/gp/aw/d/B000FGIBYQ/ref=pd_aw_fbt_auto_img_3?refRID=1596R9V9G7VJDXZJ2RWQ I used this. Fits so darn perfectly between the shift boot and little tray thing below the e-brake. The center coin holder let's the e-brake handle drop right in. It fits snugly, never moves, I didn't use the screws or strap it came with, just nudged it in there and it stays. I would post a pic but my inside isn't functional since I'm swapping the tranny today. I bought it at pep boys I think. It doesn't stand out, doesn't look cheesy, and holds our damn drinks!!! Same thing here it's been there mounted without screws just like djeffrey mentioned for years without moving. Before this one I used the single cup version with the slid on coin dish. Threw the coin dish away and attached to single cups back to back with double sided tape. the dual singles worked a little better because they were a bit narrower, I just decided that I wanted the dish in the middle so I went to the double unit. My only complaints are, when wheeling and using 4Lo you can't have a cup in the left hand one. And very large softdrink fountain cups cause gear shift issues in the right hand holder, but since "I" don't use that one, it's not really "my" problem I married my cupholder. The seat doesn't get wet with my drink anymore but I get this strange screeching sound from the passenger seat when I drive in traffic. I had solved that problem with the anti-screech knob on my radio but, now that my radio has completely failed, I'm thinking the spilled drinks are a better option. Link to comment Share on other sites More sharing options...
jwblue Posted December 16, 2014 Share Posted December 16, 2014 I got used to the OEM cup holders inside the center console. The trick is to use the left hand. With my right hand on the wheel, I would take the left hand and reach under my right arm and pull the drink under my arm. Link to comment Share on other sites More sharing options...
ebayfish Posted December 16, 2014 Share Posted December 16, 2014 I just use the top of the opened console as my new armrest, often even if there is nothing in the factory cupholders. Link to comment Share on other sites More sharing options...
SpecialWarr Posted December 17, 2014 Share Posted December 17, 2014 http://www.amazon.co...9V9G7VJDXZJ2RWQ Is what I bought. I had it shipped and installed with the 2 screws on top of the original console tray lid. Link to comment Share on other sites More sharing options...
maaakaaa Posted December 30, 2014 Share Posted December 30, 2014 Here's what I have. It actually was made by the owner before the one I bought it from. It works pretty well and stays in place great since it is tight between the seats. Here is a side view. Link to comment Share on other sites More sharing options...
94 Pathy Posted January 12, 2015 Share Posted January 12, 2015 I like the junk yard idea. might have to look for one of those if I don't get rid of my Pathy. Still debating. I actually purchased a two cup holder that someone molded years ago & sold on ebay. Got it for like $5.00 + shipping. If I could ever figure out how to post pics since everything has changed, I'd share a pic of mine. Let me see if I can figure it out again.... Link to comment Share on other sites More sharing options...
ahardb0dy Posted January 12, 2015 Share Posted January 12, 2015 Wonder if the newer pathfinder console would fit easier in my 2wd hardbody , since the E-brake is under the dash no worries about moving it over, Guess would need a 2wd pathfinder console. Link to comment Share on other sites More sharing options...
lerch641 Posted January 13, 2015 Share Posted January 13, 2015 Wonder if the newer pathfinder console would fit easier in my 2wd hardbody , since the E-brake is under the dash no worries about moving it over, Guess would need a 2wd pathfinder console. You thinking about an R50 console? Try finding one from a later year when they started using the switch rather than stick. Link to comment Share on other sites More sharing options...
ahardb0dy Posted January 14, 2015 Share Posted January 14, 2015 what stick? the transfer case shifter? Shouldn't be a problem as the junkyards down here seem to have every 2wd pathfinder ever made, I see more 2wd R50's than 4x4's. Not the best pic, got it from a for sale ad I found online, shows the 2wd manual trans console: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now