NismoSkyZ Posted May 14, 2006 Share Posted May 14, 2006 Where can I buy the hidden hitch mount and for how much? Link to comment Share on other sites More sharing options...
Runnerman Posted May 16, 2006 Author Share Posted May 16, 2006 Where can I buy the hidden hitch mount and for how much? I'm hoping to have all my bolts in this week for the winch mounts. I'll have pics or a vid of the winch sucking the pathy out with the winch mount. Thanks, Marcel Link to comment Share on other sites More sharing options...
Runnerman Posted May 20, 2006 Author Share Posted May 20, 2006 Ok sorry guys the bolts didn't show up. But here's a pic of the R50 bumper it's about 50% finished. The Bumper still needs recovery points along with bar on top and I need to finish my brackets for the mounting of the bumper. I updated my future products page. Thanks, Marcel Link to comment Share on other sites More sharing options...
tmorgan4 Posted May 20, 2006 Share Posted May 20, 2006 That looks great so far. I can't wait to see it finished and I'll definitely be buying one this summer. Link to comment Share on other sites More sharing options...
vengeful Posted May 21, 2006 Share Posted May 21, 2006 Marcel, you're a lucky guy that your wife is letting you do all this crazy stuff to her truck. Link to comment Share on other sites More sharing options...
Runnerman Posted May 22, 2006 Author Share Posted May 22, 2006 Marcel, you're a lucky guy that your wife is letting you do all this crazy stuff to her truck. Gotta love her -bounce- Not just to her truck. Mine and others as well. Starting into the Chevy trucks soon. Link to comment Share on other sites More sharing options...
OBXbeachpathy Posted June 1, 2006 Share Posted June 1, 2006 I'll buy one for sure. I was about to order the ARB, but this looks much better. Link to comment Share on other sites More sharing options...
dernt Posted June 11, 2006 Share Posted June 11, 2006 How much longer on these bumpers? The picture you showed of the unfinished bumper looked like it had provisions for fog lights, but not turn signal indicators. Will they be available with turn signal indicators? Link to comment Share on other sites More sharing options...
90seven Posted July 15, 2006 Share Posted July 15, 2006 (edited) ...here's a pic of the R50 bumper it's about 50% finished... ...How much longer? Also can you adjust it to fit an earlier R50? 96-99 have a shorter grill, the 99.5-04 sticks out a bit. Will the bumper fit the earlier models as well? Edit: One more thing, will there be a rear bumper as well in the near future? Edited July 15, 2006 by 90seven Link to comment Share on other sites More sharing options...
vengeful Posted July 15, 2006 Share Posted July 15, 2006 Marcel doesn't get on the forums very often. I'll pose these questions next time I talk with him. Link to comment Share on other sites More sharing options...
vengeful Posted August 1, 2006 Share Posted August 1, 2006 (edited) OK....some answers.. 1.) It will have provisions for BOTH fog lights AND turn signals. 2.) It will bolt up to the older Pathy's just fine. The grille differences will NOT pose a fitment issue because it is being designed around the larger grille of the newer model. I have suggested that the top plate be extended back about 1-1.5" to prevent a gap for the customers with older Pathfinders (probably the more likely demographic to purchase these, though it'll be pretty close to even). 3.) At this time, there is no plans for a rear bumper. Depending on the sales of the front bumpers, a rear bumper may come into fruition. 4.) No Idea when these will be completed at this time. The project has been put on hold due to extenuating circumstances. Edited August 1, 2006 by vengeful Link to comment Share on other sites More sharing options...
Runnerman Posted September 16, 2006 Author Share Posted September 16, 2006 Ok guys/gals. UPDATE Here is the just of it I am finished the hidden winch mount but since I do not have the R50 anymore it will be a long while to complete this bumper unless she returns my truck. However I do have the hidden winchmount in the final stage of completion-just waiting on the return of my mount and winch. Then I will make the required modifications to it and will start my production of this mount. Sorry for the wait on this but it caught me out of nowhere and will have to see how it goes for getting another pathy for the bumper. Rear bumper is not expected unless the front one is finished and there is a demand for it not just 10 orders. If everything is a go then all winch mounts hidden or bumper form will be copatable with my existing skids. Thanks for all your patience regarding this matter on the R50 products. NPORA has been great to myself and I like to hear all your input. R50 sliders were in there last stages before the truck left my hands. I will try to finish this in 07 very sorry for the wait on these. I have not stopped with the R50 products this is just a small hump in a road that I am on and will continue with it if I get another R50 in my possesion. Thanks, Marcel Miller BlackPanther Armor Link to comment Share on other sites More sharing options...
CanadianPathyNut Posted September 21, 2006 Share Posted September 21, 2006 Did your wife leave you and take your R50?! Link to comment Share on other sites More sharing options...
vengeful Posted September 21, 2006 Share Posted September 21, 2006 Short answer...yes. Link to comment Share on other sites More sharing options...
NismoSkyZ Posted October 8, 2006 Share Posted October 8, 2006 I wish you werent in AZ, id be more than willing to let you use my truck for fitment and all that :furious: Link to comment Share on other sites More sharing options...
vengeful Posted October 9, 2006 Share Posted October 9, 2006 He's not in Arizona, I'm in Arizona. He's in Manitoba, Canada. Link to comment Share on other sites More sharing options...
MichiganAve Posted October 24, 2006 Share Posted October 24, 2006 Any updates? I noticed the blackpanther site has been down. Link to comment Share on other sites More sharing options...
vengeful Posted October 24, 2006 Share Posted October 24, 2006 Yeah, his hosting company screwed up and lost the site, so he has to rebuild it. Link to comment Share on other sites More sharing options...
SkinnyPedal Posted October 24, 2006 Share Posted October 24, 2006 Marcel, you know where to find me if you need a hand getting your site back up (no backup copies of your site :confused: ) I doubt this is much help as it is an older copy, but you gotta start somewhere! Linky Linky Link to comment Share on other sites More sharing options...
kgutsb Posted December 10, 2006 Share Posted December 10, 2006 Seen these? Winch Bumper Winch Bumper Link to comment Share on other sites More sharing options...
OBXbeachpathy Posted December 10, 2006 Share Posted December 10, 2006 yep Link to comment Share on other sites More sharing options...
RWC5S2 Posted December 12, 2006 Share Posted December 12, 2006 I saw them, called the guy and ordered one for my 2003 Pathfinder. They offer all kinds of options. I chose to just go with the receiver style. Will add my own lights for off-road/night time. Link to comment Share on other sites More sharing options...
MichiganAve Posted December 13, 2006 Share Posted December 13, 2006 If you want to add lights, you'll probably want a light bar to mount them to, that doesn't come with the base model. Link to comment Share on other sites More sharing options...
nissandoms47 Posted December 14, 2006 Share Posted December 14, 2006 just drill holes into the top of the bumper like all the arbs and tjms if they dont have holes already. Link to comment Share on other sites More sharing options...
Runnerman Posted December 15, 2006 Author Share Posted December 15, 2006 Marcel, you know where to find me if you need a hand getting your site back up (no backup copies of your site :confused: ) I doubt this is much help as it is an older copy, but you gotta start somewhere! Linky Linky Thank You very much.. :clap: But my Ex is being pretty darn nasty and well I can't put it back up right now. So I am taking my time. Means alot to me!! Thanks, Marcel Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now