Runnerman

I find myself at odds here this would be the second time I agree with Vsicks Pathy I say the 05 X has more in common with the pathfinder line then the 05 pathfinder. All width Dimensions + length are the same, motor same just bored for more hp & torque. I think it's a mix of the old pathy(has frame) and the R50 (has everthing else) motor and all matching Dimensions. Yes for the new pathy -bounce- I've converted the X C'mon don't be haters this is the New R55 pathy from Nissan -study- Gone to get another

I'm lucky still good so far, all is ok! No flake.

Well on the 95 I bought there was just surface rust so my boys and I are just sanding all the rust of then I'm going to Rocker guard it. 1 side is done took 1 day using a drill and wire bit. I was kinda thinking man this surface rust sucks but after seeing your pics I'll shutty :X

My stabalizer links were so far gone that you can shake them by hand. New I should of took pictures

Hey slick hit Black Ice and rolled around 5 times. So yep very,very lucky :Magic: Here's a different angle. I used to have some nice offroad shots but when my other pc died all was lost except for some that I could manage save.

and what happened All in all it was a nice trail vehicle just needed a lift. I went out with a buddy with his explorer and pulled him out a few times he never once pulled me out. After can never drive or sit in one again. Not to mention it was costantly at the dealership for Warranty work every second week, and for long periods of time. This is how I drove so many different SUV's & trucks. It was covered in the extended warranty.

And another

Ok here's my Lib before the rolled I did take this Jeep into some pretty good trails. The only thing I totalled my stock skidplates underneath as it hit bottom many times. I had the pre-lowered Liberty. Here's some pics.

I can say this for sure. As ugly as the Pathfinder front is it is not as ugly as your model. Nothing added to the front of the late model improves the look. What is a smartass? I'm thinking you know this answer Not to hinder the point Vengeful but vsicks lives to get rises out of people it actually entertains him. Even when he's proven wrong it's like talking to your wife when she's reading a book -study- she, well he in this case just doesn't listen

I do realize that I am blessed with a Nissan. I'm quite happy with my choice, and the extra 5g's in my pocket, as my Pathy has been an excellent vehicle. Primarily because it gets me to work and back every day. As the Toyota probably would have. That's the point I'm trying to make. They may be sh!t offroad, I wouldn't know, never offroaded in one, but they're a good truck in terms of reliability. To compare it to a Heep in any way doesn't make sense. There's a reason why resale value is so high on Toyota's. Yotas are pretty good offroad as well and they are reliable. Before our Nissans we went out into a lake with my brothers 4runner a Z71 Chevy tried to enter the trail, he just ended up getting real stuck and when asked if he wanted help. His reply was If you can get in with that, LOOK at what I'm driving. Funny thing here after he said that he was so stuck and cursing up and down he finally just left. It was actually quite entertaining.

Great mudshots! Maybe want to get some seat covers (just be a little easier cleaning)

If you look at year models all vehicles have a similar design to them for that year or years

Hey Pezzy I thought only X's were allowed to playe at that event? Greay pics!

Oh man that's just to funny

Hey dwrounds if you e-mail me I can give you some detailed info on the skidplates. As for the 10G Champion to 3/16" don't be sucked in by having the 3/16" there only a 1/32 thicker then the 10G. Not only that if you somehow mangle your 10G Champion on the trail (which I can't see happening) send it back. I'll send you a new one Free of any charges. The 10G front skidplates for the pathfinders are super strong with all the bends that I have put in them. This cuts your weight down on your front end. Since I'm getting into more vehicles I'm thinking of trimming down the selection for the Pathfinders as in thickness sizes. I am running out of room.

I should add here if you alt is going on the blink and it's on it's last legs that could screw with your idle.

The squeel might be your alt as per the water crossing I know the wifes pathy is still making sounds and it's worse when it's wet.

Well at least you never said Chevy :X

Had a lmt Liberty before I rolled it. I am very glad it's gone, yay!

Looks like you guys had a good time :cool2:

The skids for the 05 I will be working on in the late Fall this will give me enough time to see the demand for them. They are still ago.

Thanks DJ, The Admin's hostility comes from wanting a Free Set of Skidplates and I told him no, he can purchase a set (which he did not want to do). So he started bashing my skidplates so I rebuttled his bashing with exposing his true purpose, then I was banned and my post deleted. Guess that hit home, and so now he quotes my deleted posts. I am not bothering with that Forum again. I know he says "Why are my plates so much cheaper"? it comes down to overhead. I have none. No employees. It's just my wife and I. I don't sell to an aftermarket company, I was going to but decided against it (thanks to NPORA). This would mean inflation and pricing would be the same as skidrows. Seems this is what people want to pay. It's weird but I can make there plates cheaper then I can make my own. (Then they would be knock offs and I'm not for that) The reason I don't countersink the holes is that the plates are laser cut this is impossible to do with this machine. As for the bends in the plates he's saying there straight design. Guess he figures what he says is true if you look, they have many bends in them. I use a 200ton break I can break over a 1/4" of steel into a box. The Champion skids have 4-Breaks and the Hero plate has 5-breaks, so a straight design they are not. The rear plates have at least 2-3 bends each. I did not start this thread there I only replied after a customer told me what was happening there. Have to say though he has sent me allot of orders, with all of his advertising for BlackPanther Armor. If he doesn't stop might have to put him on payroll I had to say my .02 as he wanted something for nothing, that's not going to happen Thanks Again for the support!

Like your picture movie pezzy She's quick guys watch out :type:

It is part# SD-3 confirmed herm Hope that helps. As for the plastic that's a good idea. So the bolts would have to be longer by 3/16" and the plastic would have counter sunk holes. What I was thinking was making a plate to cover them in away where you could still get to them. Which would be angled on both sides of the plate.

Ya someone's mad because they didn't get Free skids as they are the almighty ADMIN. Not worth it.......