Runnerman

Hey guys, I just wanted to let you know I have just finished the last of the T/C plates today. So I will be shipping them off to get coated on Wednesday. All skidplates that now get powder coated will get SandBlasted first then Powdered as this is way stronger then Acid Washing them. I'm hoping to have them back from the Coaters on Monday and I will ship all the pre-orders out by Tuesday Nov.8/05 If I get them back sooner I will ship them out sooner so I am just waiting for the Coater. Here is a rear pic of the T/C plate. Thanks, Marcel

I'll be starting on Sliders before Dec.1 I just thought I would post that I am not making a per order but will be making them as another Item that I will be selling. First I'll do the R50's the the 05Xterra and maybe the Wd21 Pathy as well. Later I'll get into the pre-05 X's

I have seen these as well I think if I went with something (which I'm not, but if I did) I would go with the glove

Hey Pezzy calm down I Will be making you a set starting pretty soon I will be incorporating a step on my sliders as well so you will not fall off when you use them. Just thought I would let you know before you spend your $$$ I haven't forgot about our deal.

Here's what you want to protect your pathy from scratches here is a pic of it The Truck Glove. Here is the site link Truck Glove Yes allot of members on this board have my pathy plates. BTW Casey I sent you a pm

FYI that does not look like no Pathy from underneath take a closer look boys/gals

Did you tell her that you had a AC lift on and just needed the bolt sizes. I'm sure she would just say what they are.

Well I have 05X and I just Love it. The more you drive it the more you want to I get around 500km's per tank this is average and is mixed City & Highway. Here you go Some sites for you to check out SOXC Loads of info here and the everyone on here is awsome this site is like the NPORA of X's VAXC Xterra Club This is a another Great site for the Xterra owners. Lots of info and everyone is Cool. Hope this helps

I was looking around for something that can protects everyones exposed Bolts. I ended up finding something that might do the trick on the Net but the ones I looked at were machined and very expensive and they also were made that if they were to be smacked they would close over the bolts. Along with the angle is to steep & not gradual. So I ended up designing these Ones that are on my site I am making them for Various sizes of Bolts. They have a Gradual angle so the thought here is that instead of the Rocks hitting a steep angle they will slide over a shallow angle easier. The Rock Washers will come with all my skidplate kits when they are ready and will also be sold as an accessory on my site for the people that just want some protection for their Bolts. These Washers are not Binded they are a solid pc of steel.

Here's the exchange rate just plug it in and bingo you have your rate. Conversion Chart

Actually Precise your off on your conversion on that it would be $3.375 US and 4.05 Cad funds per Gallon just thought I would let you know Your calculations would give us 40cents a Ltr Yes that's what I would LOve to have again :cool2: I wish we were paing a 1.50US per gallon here it's funny because we send our oil down to the states then we buy it back at a higher rate. Anyways it all comes down to High prices as the government knows that the vehicles get way better gas mileage now so they have been taking a hit so next best thing Raise the price it is well know that Canada has enough Oil to last 50 years at least for Canadians that being said we could not sell it then to anyone. Someone had to say it

Well it's a very sad day for you edta1 :sniff:

Dam Pezzy, Thanks thats's what I should of done with that pic.

Ya Albertans drive faster then the rest of us there speed limit is 110kph ours in Manitoba is 100kph mind you, you can go another 9kph without getting pulled over I think in Alberta you can drive faster as the cops are more relaxed without getting a ticket. Alberta Rocks

Ok am I reading right you said you get 700km's per tank I'm thinking typo :type: as this would be about 28-30mpg. Hell even brand new the pathy has only seen 600km's just highway driving on cruise no hills just flat highway and this was short lived. Brand new the average tank was 500km's highway and city. The speed was set at 109kph. So now the pathy averages 430-450km's per tank have to change some sensors. My X has seen 600km's per tank but again only straight highway driving mixed it gets 500km's per tank. These are summer averages winter will be allot Lower we'll be lucky between both of us to get 700km's per both tanks -alcohol-

Well FYI -study- the 04 X's don't get that great gas mileage they have allot less hp then the 05 X and they have a 4sp tranni unless you op for the manual 5spd 04 non-supercharged is I do believe around 190 and whith the supercharger it is 210hp Crazy4sno can correct me as I might be off by 5 or 10hp with the 04 X's. The new X has a 265hp and a 5spd tranni or 6spd man. So it gets pretty good mileage compared to the previous X's. So the difference in hp is like around 70hp that's quite allot

It is all about the lifestyle you live if in fact you just use it for the occasional jont to the back country road every once in awhile then it would seem that you could live without it and you probably won't miss it. If you love the outdoors and use your pathy's 4wd 1/4-1/2 the time of your driving then buy a small commuter car and keep the pathy for your excursions If you find that your in 4wd 1/2-3/4 of the time a car will not help you here. You will now have to "suck it up cupcake" because you can't live without your pathy. 100% Well it's ano brainer

How right you are I see that so much there alwways wondered why Now I know

Yes I would like to see pics

yay for the polls Redpath I voted for the R50's I do think they are th enicest pathy out there bit I do like the W21 as well. They remind me of a Tank which is pretty :cool2: It actually grew on me as I drove the one I have for awhile.

Well here it is been trying to get my wife to sign up for an account forever but she's still never. The R50 pathy is my wifes since I rolled my jeep she was the one that made the decision as this would be her vehicle. We checked out so many vehicles I think everyone. Then she laid eyes upon the pathy and she loved it! Her first words: Oh that's sexy sly mmmm ok So she took it out to the local trails and this was the LE model and she hammered it all over the trails. So she drove it back to the dealership and first thing he said to us. What the heck did you guys do (the pathfinder was covered mirrors and all) to the truck? If I would of known that then I would of let you take out a old model. Her reply I'm not buying that model therefore what purpose would that of served. (This made me laugh It was so funny) So ended up buying hers in Calgary they struck a great deal so there it is. The R55 is another story.

That's the R55 model

Now are you talking the 05 as the new converted R55 model or just the plain 05 Pathfinder model This will sway my vote

So TJM discontinued the Black one?!?!?!? Damnit!!! Man the R50's are without a doubt the bastard child when it comes to aftermarket parts.....Oh well...still resisting the dark side (Heep!) Would I be considered a trader if I got an X????HMMMMM? You can still get an ARB might take awhile but at least it's still offered.

I'm working on it almost done the full set of skids for it Front,Rear and T/C plates