ditchdiggerjcf Posted July 14, 2009 Share Posted July 14, 2009 Anybody have a clue whether or not cupholders were available for a 91 pathfinder. I have a 90 z71 that you could buy cupholders for at the dealership. What about the pathfinders? Link to comment Share on other sites More sharing options...
RedPath88 Posted July 14, 2009 Share Posted July 14, 2009 They had a removable one that went in where the ash tray is. You might be able to find one, they pop up on ebay every now and then Link to comment Share on other sites More sharing options...
ditchdiggerjcf Posted July 14, 2009 Author Share Posted July 14, 2009 They had a removable one that went in where the ash tray is. You might be able to find one, they pop up on ebay every now and then Were those from nissan, or were they aftermarket? Link to comment Share on other sites More sharing options...
nismothunder Posted July 14, 2009 Share Posted July 14, 2009 Chevy SSR cup holders are kick ass...the fold up in to nothing so you can mount them on your auto tranny tunnel...a lot better then the single cup holder in side the center consel Link to comment Share on other sites More sharing options...
beastpath Posted July 14, 2009 Share Posted July 14, 2009 Chevy SSR cup holders are kick ass...the fold up in to nothing so you can mount them on your auto tranny tunnel...a lot better then the single cup holder in side the center consel haha, did you see that on car domain too? Link to comment Share on other sites More sharing options...
nismothunder Posted July 14, 2009 Share Posted July 14, 2009 Yeah I did. Link to comment Share on other sites More sharing options...
beastpath Posted July 14, 2009 Share Posted July 14, 2009 Yeah I did. glad im not the only one who trolls through cardomain looking for cool mods. Link to comment Share on other sites More sharing options...
GreyAliens Posted July 14, 2009 Share Posted July 14, 2009 pics gents pics! Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 14, 2009 Share Posted July 14, 2009 This is what I have come up with, still to finish it off. Link to comment Share on other sites More sharing options...
helix66 Posted July 14, 2009 Share Posted July 14, 2009 Here's mine, they work way better than the original idiotic set up. I used a thick chunk of plexiglass as a platform and also to raise the tops of a regular cup just above the seat. Link to comment Share on other sites More sharing options...
westslope Posted July 14, 2009 Share Posted July 14, 2009 I screwed folding plastic cup holders into the dash just above the glove apartment. Cost circa C$7/each at Lordco Auto Parts. Link to comment Share on other sites More sharing options...
OldSlowReliable Posted July 14, 2009 Share Posted July 14, 2009 I just put mine in the arm rest....have been since i bought the truck Passengers get to hold theirs Link to comment Share on other sites More sharing options...
RedPath88 Posted July 14, 2009 Share Posted July 14, 2009 Were those from nissan, or were they aftermarket? Nissan Link to comment Share on other sites More sharing options...
nunya Posted July 15, 2009 Share Posted July 15, 2009 (edited) JGC console mod, love the cupholders...(old pic, shifters are no longer nice and strait) Edited July 15, 2009 by nunya Link to comment Share on other sites More sharing options...
Tungsten Posted July 15, 2009 Share Posted July 15, 2009 go to the junkyard and pick the flip open arm rest from a 94 or so which has the cup holders built right in thats what i did, cost me $3 Link to comment Share on other sites More sharing options...
helix66 Posted July 15, 2009 Share Posted July 15, 2009 go to the junkyard and pick the flip open arm rest from a 94 or so which has the cup holders built right inthats what i did, cost me $3 I have a 93 and it has something like that, and they completely suck balls. IMO it sucks to drive to drive with the lid open on the console and drip crap inside it and also not have a pile of junk stowed in the way and they are really weak! Link to comment Share on other sites More sharing options...
OldSlowReliable Posted July 15, 2009 Share Posted July 15, 2009 I should mention I don't have an armrest anymore, i put it back on for a bit but while offroading it would slam into my drink and make a mess.....just an fyi Link to comment Share on other sites More sharing options...
GreyAliens Posted July 15, 2009 Share Posted July 15, 2009 JGC console mod, love the cupholders...(old pic, shifters are no longer nice and strait) Nunya I am digging that! what year JGC the 90's years? Link to comment Share on other sites More sharing options...
GreyAliens Posted July 15, 2009 Share Posted July 15, 2009 Here's mine, they work way better than the original idiotic set up. I used a thick chunk of plexiglass as a platform and also to raise the tops of a regular cup just above the seat. Helix, cost wise and clean wise I may go your route for now. then down the road that 12v cooler is sweet too! i saw some black and decker ones that might fit since I could not find that store you guys mentioned, maybe it is an OZ store. i think maybe i will just keep water bottles or my aluminum cofee cup in the truck so as not to spill a bunch of sticky liquids all over the nice blue seats! =) Link to comment Share on other sites More sharing options...
colbywan Posted July 15, 2009 Share Posted July 15, 2009 Just get some gray foam and cut it like this then use a hole saw to cut out the cup holes... I made this in about 20 mins and it ROCKS!! Never tips, fits ALL size drinks cause it stretches, and seems to match pretty good too! I've had it for over a year and if it ever wears out I'll just take another 20 mins and make a new one. I even thought about mass producing them for members if enough people were interested. -Colby Link to comment Share on other sites More sharing options...
nunya Posted July 15, 2009 Share Posted July 15, 2009 (edited) Nunya I am digging that! what year JGC the 90's years? The 93 we got for sale at work is indetical except for a smaller top lid/armrest. I think the one I yanked it from was a 95, not too positive though. There is a writeup somewhere about the work involved to use it, it's what I went by and is hanging on strong. http://npora.ipbhost.com//index.php?showto...p;hl=JGC+center <- Writeup I used edit: link Edited July 15, 2009 by nunya Link to comment Share on other sites More sharing options...
beastpath Posted July 15, 2009 Share Posted July 15, 2009 doesnt work for autos though Link to comment Share on other sites More sharing options...
nunya Posted July 15, 2009 Share Posted July 15, 2009 doesnt work for autos though Really? Would think it would, theres plenty of room for movement in the shifter hole, maby a little hitting in low or 1st, whatever you auto people have? Link to comment Share on other sites More sharing options...
colbywan Posted July 16, 2009 Share Posted July 16, 2009 doesnt work for autos though Aww true, forgot about that... Well if any manual peeps want one I can prolly make one for em. -Colby Link to comment Share on other sites More sharing options...
helix66 Posted July 16, 2009 Share Posted July 16, 2009 That looks cool, but I don't see how your shifters don't hit your cups when in 1st, 4th, reverse or 4Lo. Mine has the 3" BL, maybe that makes the shifters hit that. The ones I did were using two spill master juniors from pepboys, they work pretty well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now