smoke

hey convert i got a idea for you pm me and ill send it to you

Latly I have been getting this smell of burning oil.....but couldnt find it... well i did tonight.... theres oil ozing out from the driver side vlave cover.... from looking at it.. i need to have gaskets for that....the air intake... what else??

factory bose radio cd system????? the tail lights(stop turn reverse)....

go to a dealership and get them.... i thnk $4.50 per bolt and nut.....i cant remember but its easier and id trust it from them than another place... but still i go at least a grade 8 or better if u dont.

1997 230,XXX miles, second engine with aprox 125xxx miles on her, oigional trans except tourqe converer was replaces this year

I got the idea of everything for it...and the cost of materials (75-100).... going to use either 1" or 1.5" square tube 1/8" thick....and maybe make some sliders out of 2.5" 1/4 thick square tube...all i need is a welder and a AC-O2 set up...

I will be building one here soon....will post it up here.....

Not going to work...I sometimes have to hop curbs and meadians....dont need things droping from my roof on to my head....

ok no worries....please let us know when you do get back to it....hows the one you have now holding up to the abuse?

Any more intrest in these skids??? have you got a 2.0 version out yet??

I just want somewhere to mount my scanner and cb radio once i get them in....as the lower dash dont have much room to mount things...guess i'll have to make something...it dont have to be that low...the visors sit in that lil well so dont have to have that much room...jsut to be long enough ot hold the radio unit and scanner.

Does anyone have one or know if one is made for pathfinders.....i have done searches over the net tonight and cant find anything. here is an example.... http://www.aztrucks.com/product.asp?pr=Shelf-It_Overhead_Storage_Shelf it says not able to fit pathfinders....but i kno have seen one somewhere... thanx mates

1997 R50...SE...225,654 miles..2nd engine from junker rebuilt by a good friend of mine with my help... origional trans just services this year...

sweet....new mod now and i dont have the money for lol...maybe with the next set of tires

Alright but will they fit a R50....I do not know what the diffrence in the stud spacing is...

Where did Colbywan get the nismo tires on his truck? And will it fit the R50?? http://www.nissanpathfinders.net/forum/index.php?showtopic=23849

Not for a while... just bought $600 worth of the AT REVO tires...

Well sorry for the late reply here been quite busy with school and such...Overall lift from the springs is 4 inches plus or minus half inch...depending on weight load... here are a few pix with the new springs...will start a post in the pix area of my truck soon today.

Got my truck back in once peice again...the springs are great....I got about 4.25" form where it was....thats the 2.5" back to stock hight and about 2" of lift with the springs... the ride is great not too stiff like a lot of people would of thought of...just a lil bouncy in the rear....need new shocks i the rear...what do you think rancho or bilisteins? and part numbers if you know them. Got GR-2 struts, 30x9.50 AT REVO tires on stock rims, still not a major off roader until i get some more funds to fix a few other things...

well truck is at a mechanics....measurements from the bottom of the hitch is 14.75 inches...with front at tow hooks at about 15 inches....each wheel well is arount 32 inches with .5 inch diffrence plus or minus....

Well mates i should have the springs soon....will get you measurements of it now ans then after to see how the diffrence is...will let you guys kno...

is the CEL ceck engine light...on.. what re the codes?

Same here..will take measurements of height before and after, handleing, and towing....I also keep about 250 lbs of equipment and emergency gear in the rear of my truck...will be building a light weight steel cubby for my stuff here soon too...so anther project on the boards...

Well I get paid this tueday...going to buy the Ironman springs and hopefully have them installed in roughly 2 to 3 weeks after another paycheck and some tips saved....will let you know