nunya

and your surprised why? I have the same IAB as in uncc's last pic (only mines pink unsuprisngly) which I got used from another member here, am lifted and run 32s half the year and normally 31s on 10" wide wheels the other half. still have the same Idler with no bend or play since I got the truck. and that 'problem solver' just looks like a junk design out of the box.

Ahh. To the trash with it then wanted to make sure it didn't have a last breath of life before canning it. I'll keep watching my piles for useful samples then

you planning on sneaking any recovery points into that fresh build bumper? Could proably tuck some lights into that nicely/cleanly as well

Prices haven't been set yet, still in R&D stages. How big does the color sample have to be? I just recently found a (busted) top defroster vent from my brown/grey dash if needed. If not ts goein to the g-can

I've driven on worse! He got a bath, salt removal is good

Another hose instalation trick is to give a quick shot of some lube (P'Blaster my personal choice) inside the end of the hose. Slides on a bit easier

I would assume pre and post face lift fenders are different to acomidate different corner lights, but dont quote me on it. Some r50 people will pop in here eventually

I like it, but am biased move it down a little and put an 'auxiliary reverse light' on!

gonna be a priority of mine once I get an X rack and 4 door to put it on as well. Gonna need those cross bars...

which wouldn't technically be a "90s" one, 89 was the last year for the removable back 4runners (us spec at least) which was obviously a boxy 80s style. 1990 was the changeover year to a "modern" rounded design which didn't have the removable top section (though still had a 2 door option for a year or so)

Just selective hearing (reading?)

and people think I'M the one

yea, the joys of having access to stuff lik ethat if thats your last and only one, why not call a local shop and explain to them your deal. They might throw some quick flame and buzz it out for you for a quick couple buck slide

I've always used (controlled) heat

Pansy... Mines painted with thick chunky Herculiner! (hootus was well protected when done )

nice simple flowing design, looks good side note, you apologize for pics a lot for a photographer

So it's a "someone made it fit" type deal you got and now you have to mimic what was done to the doner to get it on yours? I can understand that

Honestly for some reason, I like the square driveshaft! Balancing one for a primary use shaft might suck but it would look cool!

Wd21s share the same frame, what's your "adjustment" worry?

Have you tried yelling at it and threatening it with a chumpie 5lb sledge?

Telltale signs your alternator is gone the way of the dodo bird. Check your charging system

Wd21 hinges work pretty well on r50s it seems...

someone forgot some letters or has a dirty minded auto-correct! Good to hear you figured a cheap alternative out, fingers crossed for you it's permanent

I like the idea, but would have personally made it more obnoxious and more pre-runner/fake stinger-ish

By a vote or 2, I'm getting to making a thread for PaMountianBiker to officially praise your wining