PATHRIDER

Hey guys im working on the wifes 92 hardbody and changed the transmission and transfer case which we pulled off of a 95 pathfinder. finished it up and no movement Wouldnt it atleast have forward or reverse if the transmission is bad? Also on the transfer case I used the same oil that I used on the transmission which is dexron 3 Could it be a bad t-case or did I use the wrong oil Any input is greatly appreciated Thanks fellas

Its not quite shifting right anymore so I figured might as well replace them both

Thanks bud. I can just pull the differential shifter off my hardbody and slap it on the pathys diff

Hey guys does anyone know if the auto transmission and differential on a 90-95 pathy fit a 92 hardbody truck also auto? Thanks fellas, Neil

Thanks for posting bud

You guys are awesome..Thanks..Good thing I asked first before pulling one out coz the one I saw at the jy is powered

Hey guys looking for the thread on how to upgrade a pathys idler arm with a beefier donor steering box from a hardbody truck...Seen a couple of steering box at a local jy this morning and couldnt quite remember what year hardbody or truck steering I can pull the donor from. I seen one off of a 91 and a 87 I beleive thats just hangin so I figured pull em now and probably do my upgrade when the weather permits. Been searching for hours and couldnt find it..Thanks in advance for your help fellas

cool..wiring it tomorrow ,..Thanks guys :beer:

ok i think I got it backwards..youre talking about the light icon right and not the green indicator?

ok...looking at the switch turned sideways with the green indicator to the right

Thanks for the quick reply guys...lemme grab the switch and kinda label it from what old has described...be right back

Hey guys does anybody have a pic of the back of the fog lights switch with the wires still attached to it? IIRC theres yellow/purple/green/black wires but couldn't remember which prongs they go to at the back of the switch Help is greatly appreciated fellas Thanks, Neil

theres a couple of things that must be taken into consideration on this mod...Size of the marker light and curvature...If you guys noticed that the front fender doesnt really have a large flat area..a 2x1 would probably barely fit on there properly. I know that any size can be mounted but itll look like crap if those markers doesnt flow with the curve of the fender Im going to cut a piece of abs in the size of that clear side markers on ebay and see if I can find a spot on the fender that the abs is going to sit flush

do you have to cut an oval opening for that? Ive seen some cool sets on the bay but the backing is so bulky unlike the flush mounted sets I posted that you have to cut a rectangular holes..Ive seen a real nice smoked lens thatll match real good with my black fenders but it has to be mounted by cutting a rectangular hole on my fender Cant wait to see your mod on that bud

Why would you put a timer circuit on it? You could just easily tie in to the bumper signal wiring

yeah..extra visibility on turns and it looks cool

Im not sure..I dont sell those edit found these set..theres a lot more but this seems to be the easiest to install...search euro side markers http://cgi.ebay.com/ebaymotors/94-01-INTEGRA-DC2-SIDE-MARKER-AMBER-DOME-LIGHTS-BLACK-/390274695784?pt=Motors_Car_Truck_Parts_Accessories&hash=item5ade2f4268

this is what im using on mine...replacing the bulbs with led http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180602968829&viewitem=&sspagename=STRK%3AMEWAX%3AIT

mine has that same play and havent mess around with the steering box yet. if adjusting the screw doesnt help do we need to replace the steering box?

need to get my alignment done and will be watching this thread

what does that sensor actually do? mines is busted and its left dangling inside the door

whered you get yours? any link?

Hey guys its been almost a year since I last visited and kinda miss this site. Been busy with my little business and as usual my summer projects..Hope everybody's doing well Need to get some opinion from you guys on upgrading my headlights..This has been a project that Ive been wanting to do for quite some time now but just doesnt know how to go about doing it. Id like to keep it in a low budget and try to stay away from those expensive $500 hid conversion, I know theres probably cheaper ones out there but Ive seen the difference between the cheap set and the ones that are made in japan and germany and Id rather keep my silverstar than spend $200 on a cheap set by the way my pathy has been converted to a 5x7 headlight like the ones found on older hardbody (sorry cant quite remember the year) Heres my plan buy these: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330326008604&ssPageName=ADME:B:BODO:MOT:1 two of these: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330500788500 or http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120654962364&ssPageName=STRK:MEWAX:IT and this: http://www.eautoworks.com/products.php?product_id=189849 1750 lumens at low beam 3400-3500 lumens at high beam osram silverstar philips vision plus Philips +80 XP (xtreme power) H4 = 1000 lumen H4+50 = 1148 lumen H4+80 = ? not tested yet If I go with the Philips I dont have to upgrade my wiring but since its cheap im just going to do it or build my own with 2 bosch relays. Does anybody that upgraded their headlights wiring have a schematic on how you did it? Your input is greatly appreciated Thanks fellas

B just brought this to my attention Im not sure when he pm'd me and I apologize for not replying to this matter right away Ive been busy working on our house and I deleted my old email address and got a new one. Partly my fault for not knowing how to update my email address and I already asked B about it I gave kittamaru a set of uca and asked him to just pay for shipping and the uca was shipped about 2 weeks ago. I printed the label using paypal but for some reason he has not gotten the uca yet I dont want him thinking that Im bailing out on him on a 15 shipping. He shouldve gotten the uca by now and I emailed him just now saying that if he wants his 15 back id be willing to refund him thru paypal I tried to reply on his post also but im getting an error. Please email me at ncimson@gmail.com so that we can resolve this problem

I think this is the first ive seen this. 3 of the most knowledgeable guys on pathy answered your question..wheres Greg at