RIPB.88

Being a dealer for both, Weathertech is the way to go. MUCH better fit than the huskys and they dont roll up like the huskys do.

I just had to track down a bumper for mine. That was not fun. Some A$*hole on his phone wasnt paying attention. These wd21s are getting scarce around here.

Fast Five

Got a good rockchip in my perfect windshield. So looks like it's time to replace and repaint my trim while I'm at it.

Jean Jacket

Concert Stage

I've got the G2 Gear&Axle wheel spacers and they work great. No complaints here. But the dont make them for a Nissan so you must get the Toyota ones with the bigger hub bore. I made that mistake the first try.

She's lookin great for sure.

Full Tank

Id say check all the above and rebleed your coolant system. You may have an air bubble.

Shouldnt be a problem. If they suck in to much then just get some wheel spacers. And DONT get the ball joint spacers as they will cause problems. Better off to just get new UCA's.

The offset of the wheels is a HUGE factor. But running stock wheels shouldnt be too big of a problem to fit those.

PM Fluery. He make Strut spacers for pretty cheap. Many members here use them and I haven't heard of any complaints.

Corn field

Blow Torch

Its your Window Regulator. Easy replace. Working in a glass shop, I see that all the time.

Dragon Slayer

Went up to the mountains yesterday to go play. Found a small hill to park on. But unfortunately, its too early in the season and none of the trails are open yet.

Double dip

DONT use ball joint spacers. You dont need them, especially if using new UCA's. They put more strain on parts and its not a good idea. The new UCA's help to fix the ball joint angle problem when raising your front end.

Power House

Slow and Steady and you'll be fine. Just remember you're not in a racecar.

Might also check the ignition switch itself. I had an S10 that had a similar problem and wouldnt crank all the time. Pull the shroud and wiggle the wires going into the ignition switch while you try to crank. Might be worth a shot.

River Rat

Mine is just mounted to my factory crossbars. Perhaps check your local j/y and see what they want for a factory rack. It wouldnt be all that hard to add it. Then problem solved.