ferrariowner123

You tried re-soldering the 4 main pins? I had this exact problem on my 96, I soldered the pins and It’s still holding up 5 years later. But if you just wanna turn it off, do what he ^^ said. -Kyle

How tall are you? i'm 6'2" and i fit comfortably. I doubt you have them but the powered seats sit higher than the manual ones, if you have powered, consider swapping. -Kyle

Towndawg are i are eventually going to pull the rear half of the gamblr rig and swap it out for my zenki bumpers. Thanks though! -Kyle

Looks like these guys still sell it, at $700 its a little pricey. https://www.nissanpartsdeal.com/parts-list/1996-nissan-pathfinder/body_front_roof_floor/sun_roof_parts.html?Diagram=736_001 -Kyle

Depends on your particular needs. If all you're doing is some extra lighting, the stock alt is fine, maybe a decent battery upgrade would be advised, depending on how many watts you're drawing. If you want to run you SMD dual magnet 18" sub woofer with 5000 watts to each voice coil, you're gonna need that 270amp alt, maybe 2. lol -Kyle

The quest alt has options for both the 3.3 and the 3.5 but i think at most its like 110amps. i believe the factory alt in our cars is an 80amp.

Pricey but powerful 250amp https://www.dcpowerinc.com/products/11051-250-xp-nissan-pathfinder-2002-3-5l-v6-vq35de?_pos=2&_sid=97ea19829&_ss=r 270amp https://www.dcpowerinc.com/products/11051-270-xp-nissan-pathfinder-2002-3-5l-v6-vq35de?_pos=17&_sid=97ea19829&_ss=r says it fits the whole R50 range, but also says 3.3 so i dont know what to think. https://ruggedrocksoffroad.com/nissan-pathfinder-high-output-alternator-by-rugged-rocks-1996-2004-33l-v6-180-amp-p-60701.html As far as im aware there are no off the shelf upgrades for the R50 rad, you are going custom, or spending the time and money to see if there are alternatives that fit from another car. I remember looking into it somewhat and thinking the S14 240sx radiator looked close and had the outlets in the correct orientation.

Probably your best bet. https://www.crutchfield.com/S-I0Gjw6kFQLp/p_120RFASWC/Axxess-RFASWC-Universal-Steering-Wheel-Controls-Package.html The zenkis never had the option for steering wheel controls. Those little covers you are steering wheel are access points for removing the air bag. -Kyle

With the new toy. -Kyle

Test EDIT: It worked

Looks good, let us know how it stands up to sun and weather, looks like an easy way to restore some of the trim on our aging rigs. -Kyle

had the same thing happen on my 96, i think it was after i cleaned my throttle body. Throttle position sensor was out of wack, needed to be rewacked. FSM has the procedure on how to do that. Cant say for sure its whats wrong since you have a 3.5 but its where i would start. -Kyle

Oh wait part numbers. Maybe this will help, this was printed on the back of the item posted above. Hope this helps. -Kyle

I think i might have found it. it just says terrano instead of pathfinder. https://page.auctions.yahoo.co.jp/jp/auction/j524413668 -Kyle

JDM projectors are on the high end of the options but are an OEM Nissan part, so they fit perfectly and are OEM quality. Can be a little tricky to get a hold of but are so nice once you have them. -Kyle

I ship stuff from japan fairly frequently, im used to the shipping charges, ive wanted a set of those ever since i laid eyes on them in my JDM catalogs, SO please, if you find a set, PLEASE send me a PM Many thanks -Kyle

If you ever come across another set of those wide wind deflectors, let me know, i want a set SO bad! -Kyle

Came stock on my 96 SE -Kyle

I hate to link another forum but Towncivilian over on NICOclub made an excellent index of all the Lamps in the R50's. Even the bulb sizes in the auto shifter lights https://forums.nicoclub.com/topic563777.html -Kyle

I want it, i want them both! -Kyle

Yeah! Another JDM headlight brother! Question, how are you going to get the fender lights to work without the fenders? -Kyle

i vaguely remember this happening after i messed with the throttle body, i cant remember what exactly i did but it was something to do with the throttle position sensor. Have you messed around with anything recently? Is it throwing any codes to speak of? -Kyle