sroeser01

I just googled it and got some good answers. Check it out

I changed to a larger tire size (31x15.5r15) and didn't really worry about the speedo cause it will only affect the speed slightly but had to change the speed sensor any way later on down the road cause it stopped working. Was one of the hardest sensors I've done. Hard to get to if its stuck in there mine came out in peices then I drilled the rest out

Just awesome. Damn

Looks like with a lot of work it will be very nice. Keep at it!!

I've taken my whole console apart for aftermarket sterile and cb radio install and don't know how to get to these bulbs? Any help ?

My pathy was originally from NH and it was there for the first 9 years and then spent about seven years in south Florida where rust really doesn't exist. Since I've moved back up north east and I was slightly worried. I noticed surface rust on the towers. Took her into Nissan and it was only a lvl 1 repair so I lucked out got home and bedlined everywhere under the truck I could. Will be giving it a underbody wash weekly and it'll be good for a long time!

They should all be under 160.00. Uhaul, reese which is pretty darn cheap, but If you get lucky and find one used it should be half that price

Look up tactial armour group.

Nice looking ride. I have a 97 almost idenical to theezbrits and my roof basket sits on thule roof rack and cross bars. I believe thule and yakima make low profile bars. Not sure tho

I don't have any experience with the tranny being in safe mode but after I replaced my a month or so ago the speedo stopped working. Replaced the speed sensor 120.00 on rockauto and fixed it. Was easily one of the hardest sensors I've had to take out ended up drilling it out. New one has anti-seize!!

Much needed!!!

4wd swap!!!! Please. Awesome looking rig

Sorry no info on the straight piping it

I removed mine when my resignator got caught and all bent and just replaced the whole exhaust. It's not that expensive...

If your gonna go ome check out rockyroad.com not the best lift in my opinion tho. Good luck to ya

That looks awesome man. I'd paint it black or something if.it.were me might look good

Yes there still around they used to be TJM but they either got baught or are under new management as TAG. I believe there out of Georgia. Not sure tho

Only down side is its at least $750.00 plus shipping and its 100 lbs. I'm looking into the one XPLORx4 was talking about

Looks great so far

Good work man. Love the homeade stuff. Keep it up

Agreed. FSM

Same problem here. I'm installing a cb radio this week so while I have the whole panel off I'm planning on checking all the connections but other than that I'm not sure. Any ideas would be great

It was just a thought. AC screws pple on shipping and if the springs were better from over seas i'd pay more any way but if the sales rep I emailed gets back to me with a quote ill be sure to tell