nissandoms47

as i said to you on AIM, you cant put a 98+ on a 96-97.. find a 96-97 and be done.

yes it would throw a code. If your not close to an autoparts store you can read the codes yourself by taking out the ECU and switching the dial to diagnostics, this will cause your SES light to blink. those blinks are the codes.

lol..

Frontiers and Xterras dont have springs, I don't see how your rear axle could be toasted, its a h233b! only thing i can think of that happened with it would be ran on low fluid or the pinion was wobbling around inside the carrier and screwed it all up. if thats the case just replace the 3rd member. even if that axle that the shop ordered was wrong, if it was out of a 33 spline axle the shafts and 3rd will interchange i think.

Dean, Do those poly bushings squeek at all? I know my friend Eric with a WD has polys on his front end and they squeek all over the place.

bank 1 is the same side as cylinder 1. so on yours it would be the passenger side for bank 2. hence why it has constant voltage. it should vary.

replace the 02 sensor, dont worry about the -0325 or w/e it was.

looks good!

Or the inner bearing, heh mine was stuck to the spindle.

i have so many wires going through that little hole next to the MC that i just used a boot type thing and some RTV stuff on it. worked fine for me.

ill try that, i definatly need one know. 4 inch thick ice just destroyed my stock front valance. damn snow wheelin. can never see those frozen over mud pits.

what was the ses light for can you recall?

yeah ive been trying to get ahold of them for the last 2 days. seems like the phone is too busy or something.

just drill holes into the top of the bumper like all the arbs and tjms if they dont have holes already.

i forgot to add. i wouldnt have the huge lights lol.

lol dean. i dont really plan on a bumper like the one that was earlier linked. i really like the look of this one.. Front top Mounts now thats a custom bumper built by rocklogic4x4, if they can do something like that for the r50 i will be pleased.

lol thats why i got the tint. most ricers over here dont tint their windows and i can make fun of them all night long.

no idea yet. i still have to call them. been trying all day. tyler, do you know where any pics of that guys bumper are? id like to see how it looks on his. oh i think i found it custom bumper

well i came across a local offroad shop called rocklogic4x4 ( www.rocklogic4x4.com ). They make custom everything pretty much. I need a new front bumper since the stock one is all messed up. What do you guys think of a pre runner/ tube front bumper? With sheet metal inbetween the tubes like how dean wants his rear bumper done. It wont be a winch bumper, just something that'll hold up a little better then the stock bumper and possibly improve the approach angle. and a light holder of course anyways feedback would be nice.

LOL

build a box for it.

yeah i never knew what it did. mine is still hanging there. what does it do?

i would rather spend the money and get a TJM one. the mounting system is a whole lot better then KMAs. i dont know why KMA didnt have their mounting like the ARB and TJM. its fairly simple.

yeah i was lookin at the kma bumper. i just think it sticks out way too much for the r50 body style. and i do not like the way it mounts at all.

not the actual sensor just the tube housing thingy. sorry.