nissandoms47

i highly suggest magnaflow over flowmaster. as for those lights, im with ya on that, i spent 40 bucks total on my pro comp lights and already broke the lens twice on it. replacement lens are only 4 bucks from 4WP. ive considered the hella 500s up there but it would be more expensive to replace.

he probably did the right thing and sas'd, lol just playin.

nice lookin pathy you got there.

eh everytime i do my brakes i just replace the rotors anyways. $20 bucks a piece isnt bad and it looks good haha.

ah lol nice.

uh dont you already have a set? lol

drivers side rear 02 sensor is bank 2 sensor 2.

id like to see what that kma bumper looks like on the qx4

you plug in the reader and press erase.

ask the dealer, they'll know for sure.

it was the 96 that had the canister under the hood.

how many miles does yours have? im getting one for $600 but they usually run $1000 or so. but its cheaper then $2200 for that service.

its cheaper just to get a new engine lol.

yeah im just driving the qx4 for now. the new engine is going in sunday. it shouldnt take more then 6 hours. not very complications either. since the new engine is pretty much new. dont have to do a tbelt or anything on the new one. ive got spare vacuum hoses and all that just incase they are so brittle and snap.

yeah i wonder. well im getting the ecu and harness and all that so i guess it cant hurt to play around with it. but im sure i was way below stock HP and torque on my motor. my oil pressure was very low and i wouldnt be surprised if the compression was below minimum on the cylinders.

i know...

yep i knew it was coming for a long time.

if its the abs brake box, his lift isnt high enough to encounter what others have. if its the plate that covers the fuel lines, his tires arnt big enough yet to rub on it.

my engine exploded last night, so its gunna have some downtime but it'll be up and running in no time! ill keep you guys updated in the next week, i hope tow the pathy to the garage thursday, get the engine saturday and swap it sunday. shouldnt have to do anything special since the engine only has 48k on it. its coming out of an 03 xterra btw.

put some heavier weight oil in there, it should help it a bit, i have the same thing but its not as bad as yours. probably the same as deans, my main oil leak was from the valve cover gaskets and the valve cover coming loose over time.

its all good.

humm maybe he didnt make himself clear, hes talking about strut spacers. not wheel spacers.

it could be your valve cover gaskets, mine were leaky and it leaked down the back of the engine and dripped from the oil pan, looked like a rear seal but it was just the gasket.

nice, surprisingly i dont get that much lean with the AC lift because its pretty stiff. no sway bars or anything and it rides just fine. what winch did you go with tyler? i wanna get that tjm bumper everyone is trying to get but no one can commit and if that falls through ill probably just do a reciever mount up front and have a removable winch.

yeah 32x11.5s