jadm4x4 Posted July 30, 2009 Share Posted July 30, 2009 what size ali are you after? either 50mm solid round or 50x50 solid square. for lift blocks. if i can get the solid at a resonable price. drilling the hole aint much. between us we shold be able to work out the rest and be able to do a couple of cars in a weekend. if we can organise it. i got room to work 4 cars at once on cement at my place. and we should be able to get bolt lengths and sizes of here or other formus aswell. im trying to get back into the ally industry again. but i have alot of contacts still in qld to. sholdnt cost to much to get sent over from there. if we look on average retail price at $250 a car we definatly should be able to halve that at a max. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 30, 2009 Share Posted July 30, 2009 hey macdaddy. how did you go sourcing the plugs for the back of the spotties. any luck. if you want you can stop in and show me and ill see what i can work out Link to comment Share on other sites More sharing options...
maccdaddy Posted July 30, 2009 Share Posted July 30, 2009 (edited) I'll be happy to take one of those car spaces I haven't had a look for the plugs again, been too busy with uni, they look like they need to be Hella ones, i haven't seen many like them. Edited July 30, 2009 by maccdaddy Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 30, 2009 Share Posted July 30, 2009 I'll be happy to take one of those car spaces no worries. I haven't had a look for the plugs again, been too busy with uni, they look like they need to be Hella ones, i haven't seen many like them. sent you a pm Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 30, 2009 Share Posted July 30, 2009 either 50mm solid round or 50x50 solid square. for lift blocks. if i can get the solid at a resonable price. drilling the hole aint much. between us we shold be able to work out the rest and be able to do a couple of cars in a weekend. if we can organise it. i got room to work 4 cars at once on cement at my place. and we should be able to get bolt lengths and sizes of here or other formus aswell. im trying to get back into the ally industry again. but i have alot of contacts still in qld to. sholdnt cost to much to get sent over from there. if we look on average retail price at $250 a car we definatly should be able to halve that at a max. When I am off quarantine next week I will have a look at work, I should be able to order the ali by the metre, 2" lift would only take 500mm roughly per car, if we can get sizes for the holes I can have the CNC centre at work machine them aswell. Hardware I can get at trade prices if we can get sizes as well. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 31, 2009 Share Posted July 31, 2009 ill go through some threads and find the sizes we need. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 31, 2009 Share Posted July 31, 2009 just started a social group on perth 4x4 for pathy and terry owners. come join in Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 31, 2009 Share Posted July 31, 2009 you have to approve me then Link to comment Share on other sites More sharing options...
maccdaddy Posted July 31, 2009 Share Posted July 31, 2009 Me too. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 31, 2009 Share Posted July 31, 2009 hahahahahaha sorry im on 4 forums a once.....lol Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 31, 2009 Share Posted July 31, 2009 No worries, I'm usually inhabiting 2 or 3 as well as facebook Link to comment Share on other sites More sharing options...
Auspathy Posted August 1, 2009 Share Posted August 1, 2009 Just popping in Link to comment Share on other sites More sharing options...
DavefromOZ Posted August 1, 2009 Share Posted August 1, 2009 Just popping in Hey stranga Link to comment Share on other sites More sharing options...
jadm4x4 Posted August 1, 2009 Share Posted August 1, 2009 im finaly employed start monday Link to comment Share on other sites More sharing options...
DavefromOZ Posted August 1, 2009 Share Posted August 1, 2009 im finaly employed start monday Congrats mate, where abouts, what doing? Link to comment Share on other sites More sharing options...
maccdaddy Posted August 1, 2009 Share Posted August 1, 2009 Nice! It's about time Link to comment Share on other sites More sharing options...
Kingman Posted August 1, 2009 Share Posted August 1, 2009 oh hang on new page isnt that how it goes..... ill just hit myself My new page dance even traveled to the Ozie thread? I feel so honored! Ok I'll get out of your thread now... Link to comment Share on other sites More sharing options...
maccdaddy Posted August 1, 2009 Share Posted August 1, 2009 Hehe you can stay, but we'll be needing some rent money... Link to comment Share on other sites More sharing options...
jadm4x4 Posted August 1, 2009 Share Posted August 1, 2009 Hehe you can stay, but we'll be needing some rent money... AHH WE WILL TAKE ANYTHING. SHIRTS. PARTS. YOU NAME IT JUST NOT US DOLLARS OR JEEPS....LOL Link to comment Share on other sites More sharing options...
jadm4x4 Posted August 1, 2009 Share Posted August 1, 2009 Congrats mate, where abouts, what doing? Factory manager, for a small blind company. its in wangara. close o home wich is good. nothing really with ally a the moment, but he wants to get back into security again to. so ill be well used Link to comment Share on other sites More sharing options...
DavefromOZ Posted August 1, 2009 Share Posted August 1, 2009 AHH WE WILL TAKE ANYTHING. SHIRTS. PARTS. YOU NAME IT JUST NOT US DOLLARS OR JEEPS....LOL I'd take USD, with the AUD where it is. Link to comment Share on other sites More sharing options...
jadm4x4 Posted August 1, 2009 Share Posted August 1, 2009 i see the new member is another aussie from darwin. hi courney. come join the aussie crew. Link to comment Share on other sites More sharing options...
DavefromOZ Posted August 1, 2009 Share Posted August 1, 2009 PM sent to new member *sits and waits for new arrival* Link to comment Share on other sites More sharing options...
jadm4x4 Posted August 1, 2009 Share Posted August 1, 2009 PM sent to new member *sits and waits for new arrival* also did the same. but when they first poped on here. *sits and waits for new arrival eating popcorn* Link to comment Share on other sites More sharing options...
DavefromOZ Posted August 1, 2009 Share Posted August 1, 2009 Since we are sitting around waiting... your shout Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now