maccdaddy Posted July 26, 2009 Share Posted July 26, 2009 Yeah we'll get together soon and we should do your CV's at the same time lol. I just need to get my hands on a wiring harness and the plugs for the back of the spotties which i can't seem to get easily. I went into Coventrys and they have a male and female kit, but i only need the female so i don't know what I'm supposed to do because I would need two kits then at $28 each then a wiring harness for a further $70. Once I sort out the plugs I'll look at Jaycar and see how much it would be to make up a harness myself instead of buying a kit. /End whinging poor student. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 26, 2009 Share Posted July 26, 2009 (edited) hell yeh. hey macdaddy. im on the north side in craigie to. i think yeoure around here somewhere arnt you. if you ever need a hand drop me a pm. ( im always boared @!*%less) i done all the wireing on my car. nothing to it. Edited July 26, 2009 by jadm4x4 Link to comment Share on other sites More sharing options...
maccdaddy Posted July 26, 2009 Share Posted July 26, 2009 Sounds good man, yeah I'm just in Greenwood. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 26, 2009 Share Posted July 26, 2009 hey cyril. looks like you uys got a @!*% fight on youre hands the in nsw with that new law if it comes in with the lifts. 50mm overall. thats down right fuged Link to comment Share on other sites More sharing options...
maccdaddy Posted July 26, 2009 Share Posted July 26, 2009 I know, those new laws are the biggest load of crap I've ever seen! If it does get passed then they'll want to take it to other states too. I've already sent a letter to my local MP about it. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 26, 2009 Share Posted July 26, 2009 yeh so have i but just incase im going to do as much as i can to get the pathy as possible incase there is something for cars that have existing mods...... Link to comment Share on other sites More sharing options...
maccdaddy Posted July 26, 2009 Share Posted July 26, 2009 That's a good idea, I don't have the funds for it though lol. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 26, 2009 Share Posted July 26, 2009 That's a good idea, I don't have the funds for it though lol. nah im a bit on the light side of the stimulas packege aswell. but where i can do it for just about stuff all i will do it. i seem to be able to get that sort of stuff cheap. but im always willing to give anything ago. Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 26, 2009 Share Posted July 26, 2009 We are already limited to 50mm over here. Cyril PM'd me the other day, looks like it will be too late for him to have the Terrano passed before the laws change, is going to have to have it passed on 31's, original rear springs & t-bars let out a little. It definitely sux, but at least over here we dont have to go through annual inspections, where Cyril will being in NSW, they are mandatory for rego. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 26, 2009 Share Posted July 26, 2009 hay cyril. you will have to join us over here in perth. time to pack up.....lol Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 26, 2009 Share Posted July 26, 2009 (edited) hay cyril. you will have to join us over here in perth. time to pack up.....lol Haha, that would be awesome, the 4 of us could all head out and put the big boys to shame over here. Edited July 26, 2009 by DavefromOZ Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 26, 2009 Share Posted July 26, 2009 Haha, that would be awesome, the 4 of us could all head out and put the big boys to shame over here. well give it a go anyway. lol Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 27, 2009 Share Posted July 27, 2009 COME ON GUYS. WHERE IS THE AUSSIE SUPORT FOR DAVE IN TRUCK OF THE MONTH..... GO VOTE NOW I have 3 votes, another 2 and I join the tie breaker. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 27, 2009 Share Posted July 27, 2009 I have 3 votes, another 2 and I join the tie breaker. atleast youre not running last.... ill go in next months Link to comment Share on other sites More sharing options...
Cyril Posted July 27, 2009 Author Share Posted July 27, 2009 Thanks for the invite to Perth boys , The laws are an proposal at the moment but the engineers are under that law allready which sucks and their booked out till the end of the month as everyone is trying to push thier mods through , so will have to at the moment engineer it with standard trim height which thier are no records before 97models . the max height is to 50mm total ( suspension , body and tyres combined ) . So will have to lower the suspension as the body lift will be my 50mm and run with the 31 x10.5 x 15 as these were an option for the Pathy . But at least the beast will be on the road again and back to beach fishing , and hopefully the laws will change and this proposal will not be passed and then it will be re-tested and passed with 2'' suspension and 33'' s . But at least it lives again . YEH . Got the high lift and the snatch strap and have started to build a high lift carrier for the rear swing carrier out of tube . Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 27, 2009 Share Posted July 27, 2009 good to here. it must bloody suck though. i know alot of people that are going to be pissed off with that. ood to see the beast is nearly there though. Link to comment Share on other sites More sharing options...
Cyril Posted July 29, 2009 Author Share Posted July 29, 2009 I'm still hopeing the proposal gets thrown out . Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 29, 2009 Share Posted July 29, 2009 Here is one for beeing but fskced up the a$$ again by the governent...... we are so lucky to have the @!*% leaders we do. let us all hope here it dont go through, for all the states and territories in Australia Link to comment Share on other sites More sharing options...
Cyril Posted July 30, 2009 Author Share Posted July 30, 2009 Here is one for beeing but fskced up the a$$ again by the governent...... we are so lucky to have the @!*% leaders we do. let us all hope here it dont go through, for all the states and territories in Australia Can only hope they don't for the sake of all Australians . Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 30, 2009 Share Posted July 30, 2009 This is good news NSW MINISTER FOR ROADS MICHAEL DALEY MP NEWS RELEASE MINISTER AGREES TO FURTHER CONSULTATION ON CAR MODIFICATION LAWS Wednesday 29 July 2009 Minister for Roads Michael Daley today met with representatives from the 4WD community and car industry who asked for the introduction of proposed vehicle modification rules to be delayed and for more time to consult. Mr Daley said he agreed to put the rule changes on hold and that more consultation was needed following the meeting. “I’ve listened to feedback from the industry and the community, and have agreed to set up a working party to look more closely at how we are going to address this road safety issue,” he said. “All of those who attended today’s meeting agreed that safety is paramount and that unsafe modifications of vehicles do need be stamped out. “The working group will include representatives from the NSW Centre for Road Safety, Four Wheel Drive NSW-ACT, Australian Automotive Aftermarket Association, the Australian 4WD Industry Council as well as other agencies and experts,” Mr Daley said. Executive Director of Australian Automotive Aftermarket Association Stuart Charity said this was a terrific outcome. “We’re passionate about road safety and we understand the intent of the regulation is to make the roads safer,” he said. We’re looking forward to working towards a practical solution that meets road safety objectives while also taking industry views into account,” Mr Charity said. Greg Redfern from Four Wheel Drive NSW-ACT also welcomed the outcome and said the working group would have their full support. “We want to eliminate unsafe practices in the driving community and we’ll work with the government to make sure these new regulations meet those objectives without any adverse consequences for the motoring community at large,” he said. “We all agree that there is no place for extreme and illegal modifications, but the clubs in our association follow a strict code of conduct and ethics, and we want to make sure they’re not punished,” Mr Redfern said. Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 30, 2009 Share Posted July 30, 2009 (edited) for now. im crrently looking for some solid alley so i can make lifts if anyone is interested in perth..... hopefully a job wil come my way next week. im so sick of not havn any money to do anything to the car. NEED TYRES URGENTLY Bt need to get rego transfer and as many mods done as possible in case it does come in. oh hang on new page isnt that how it goes..... ill just hit myself Edited July 30, 2009 by jadm4x4 Link to comment Share on other sites More sharing options...
DavefromOZ Posted July 30, 2009 Share Posted July 30, 2009 what size ali are you after? Link to comment Share on other sites More sharing options...
maccdaddy Posted July 30, 2009 Share Posted July 30, 2009 Great news! VSI 50 has been "Indefinitely Postponed"! Nice work everyone that sent letters. Link to comment Share on other sites More sharing options...
maccdaddy Posted July 30, 2009 Share Posted July 30, 2009 (edited) Double posting like a whore. Edited July 30, 2009 by maccdaddy Link to comment Share on other sites More sharing options...
jadm4x4 Posted July 30, 2009 Share Posted July 30, 2009 Double posting like a whore. hahahahahahahahaha may aswell. everyone else does......lol... gets the numbers up Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now