thehuntersam

suzuki230 here, nothing but off road vids of the pathy. I also tag npora

Yes it is, I would reccomend the xterra or frontier VG33, not that there is anything wrong with pathfinders VG33, just less work if you go with the xterra or fronty.

I have heard of this problem before and it was on another site, I think it was nissanoffroad.org I can't remember what they did to solve it though..

Not bad at all. That's a lot of weight too. I just averaged mine out this week as well. I'm getting 17mpg with mixed driving. Not bad for 33's a lift.

You could also try cleaning the MAF for kicks, changing out the fuel filter, or running some sort of cleaner through it as a last try. Like Marvel Mystery Oil, Sea foam, injector cleaner etc, just to see if that will clear some stuff up out of the engine. More than likely your electrical is not happy somewhere.

Here's an update of the pathy, Over the past few weeks I have been working on it doing front end stuff, all new ball joints, new tie rods and new wheels and tires! New tires are 33x12.5R15 BFG Mud Terrains (KM's) Wheels are 15x8 and that's all I know about them, they kinda look like old chevy wheels. I will be getting my new center link and polyurethane tension rod bushing tomorrow as well. Then the front end will be all good again. I recently got a new job, at ebay! So if you guys have any questions or something of that nature just let me know and I will see what I can do. I plan on getting a lot of new things this summer, starting with a 3Inch SL here in about 5 weeks.

Mine whistles but not nearly that loud! You could always go to the jy and swap out the MAF and see what happens if it it still super annoying..

Okay yeah I tried yesterday through the back and I couldn't figure out which way to go. So I think I will just go and take off the tires and disc to see which way will tighten them.

I think you just answered my question. My e-brake cable is not working anymore either. I tightened up the nut where they both connect in the middle and that did nothing. I have disc in the rear so I just need to pull them to adjust the cable again? I have the fsm so Ill give that a look as well.

Been there done that! My door handle broke and the locking mech. inside..

I lied, I looked over them today and they're 15x8. They seemed to handle fine. I don't know how much back spacing is on it though. I just put in new wheel bearings also along with pretty much everything else, bj's tr's etc. But thanks again guys!

Sorry to jump start a dead thread here but, I got some new 33x12.5R15 bfg muds today to replace the worn out swampers. They came with 15x10 wheels for free. Should I just bolt them on or do a wheel swap? I plan on getting a SL here in about 5 weeks.. Thanks!

AWESOME!!! Thank you thank you thank you!

Most pathfinders came with those 31x10.5R15 tires so you can easily fit those. As for the other problems I'm not really sure about.. One would assume that nearly all parts would be compatible with each other. If all doesn't end up working you could always rig something up to work.

I have and broke one so far. I really like them though. Always be sure to make sure the bolts are tight like said before. I have found one or two loose before..

Yes please find these for us!! I have spilled more drinks in the pathy than anywhere else!

I replaced parts of the floats and fuel pump a while back so maybe I messed something up then because that was before I put in good VR so I might have to tear into that again.

Good idea, I was going to poke around the gas tank today and see where the wiring is all at. From what I understand, the wires are just a straight shot from the tank to the gauges so yeah. I also even switched the gauges themselves to see if that was the problem and still nothing.

Yes I Checked both and they were getting just over 8 volts. I will need to do that, the ground I know has problems. It burnt up one time a while back..