enkrypt3d

http://www.cardone.com/Products/Product-Detail?productId=666051&p=rock I ordered these - has anyone had any experience with them? And are they ok? For $50 each u cant go wrong really......

If I'm replacing all the rubber bushings in the front end, would there be any combined labor savings by swapping out new front axles? I found that I might as well replace the axles instead of the CV boots as its the same amount of labor...... hopefully my question makes sense.... thanks guys! The dealer quoted me around $600 to replace UCA & LCA bushings, Strut Rod Bushings & all ball joints so I kind of figured it'd be pretty easy to just swap out the axles while they're in there right? Thx

post some pics!

I'm in los angeles.

Yea my strut rod bearing just gave out its clunking on every turn....waiting for the new bushing kits to arrive and hoping the labor costs to have all the bushings in the front end wont cost me an arm and a leg though.

Called the tire shop back and it still red flags it whisky tango foxtrot over??? I guess I'll have to go with OEM sizes....... *facepalm

har har - 90% of the images are missing on the first page but I guess you didn't notice......

I have the OEM chromies......

would 30X9.5R15LT be a good size for my OEM rims? Cant really afford changing rims as much as I'd like to.....

Whoops forgot to get new CV boots....might as well right?

Yea I gotta replace all my bushings first $$$$$$$$ labor....... ugh wish i had my own shop.....

I guess I'll have to go with 235/75/15's then... will it look silly with tires that skinny with such an agressive tread design? haha thx

Hmm interesting - so how does this happen exactly? Just wear & tear? or a design flaw.......?

nevermind I believe I need 2 uppers and 2 lowers....thx! Went ahead and ordered a new center link anyways since I'm replacing all the toe links as well...

Dont I need 2 of each ball joints? You have 2 for the K9022 but only one for the K9347?

Anyways I'm trying to understand exactly what parts are being swapped out b/c it all looks the same to me.

So do you guys think that fitting those 31's on the OEM Chrome rims wont' be an issue? 15x6 seem realllly narrow..

Center link looks fine and steering is great after replacing idler arm.

Already replaced shocks and ilder arm...

http://www.moog-suspension-parts.com/ I was going to go with parts geek but they have an F rating with the BBB.... hoping it wont cost me another 1k to have all this installed.... maybe more?

Ordered these: MOOG-K9022 Front Upper Ball Joint $33.00 2 MOOG-K9209 Front Upper Control Arm Bushing Kit $15.54 x2 MOOG-K9546 Front Lower Control Arm Bushing Kit $27.37 x2 Moog-K200163 Front Strut Rod Bushing Kit $15.14 x1 MOOG-K9347 Front Lower Ball Joint $59.06 x2 MOOG-ES3375 Front Outer Tie Rod End $52.15 x2 MOOG-ES3376 Front Inner Tie Rod End $44.11 x2 Hopefully that'll cover it! Are these moog parts poly or rubber? It didn't say on their page..... thanks and let me know if I missed anything cheers

Can you explain what I'm looking at and elaborate on what you're talking about? Im completely lost on this one lol

Thanks guys - making a list of items to get: https://www.4x4parts.com/nissan/tension-arm-bushing-kit-p-4129.html for tension arm (not sure if this is only for one side or do I need to get 2 of these? https://www.4x4parts.com/nissan/control-arm-bushing-kit-p-4125.html same for this - is this per side? Still need to find ball joints... Oh and btw I have new Rancho RS5000 shocks in the front and rear... but as I go over speed bumps, the front end makes a horrible groaning / squeaking sound as the front end settles. With the old shocks it would bounce but not so much noise. I guess once you tighten up one part, it sends the energy to some other part of the suspension! Hopefully after replacing all these will make it quieter and more comfy.......

How wide are those rims? Just curious thx!

94pathy, so the parts you got are these right? https://www.calmini.com/detail.php?b=1&m=3&t=2&p=623&n= https://www.calmini.com/detail.php?b=1&m=3&t=2&p=624&n= Or did you get the whole kit? I want to see if I can just get these with my Rancho RS5000's and be ok even though the Rancho's say they're only good to a 2.5" lift...... not sure if I really *need* a 3" lift but it'll look badass