stalker

the sun must not shine in a lot of places.!

here it is...i know its ugly..it will all be plated in so no water or mud will get in there

i will take some pictures later today if i get a chance

i can show you a picture before its finished if you like.? i still need to weld in some plate and then it will be finished

also cut the rear fenders...

Good eye TME...those are already cut off...had one of the guys at a local 4x4 shop weld those on because I've been so busy working...long story short. thats not the only thing he F up...just waiting for the new ones to get in...I was using the factory uppers for the rear but now I am going to make a custom upper mounts so I can move the shocks up higher and angle them in a little more...

first bath in 4 months.!

those are getting chopped off and put up higher for a better angle...you can order those same hoops from TG

still waiting for my drivelines to be finished but here is how it looks for now...

measure eye to eye and then you can determine what you can use to replace them

Nice Work

Bilstein 5125... best bang for your buck.!

Me and a few friends been wanting to go check out browns runs...I hit you up for sure

7/8 from Ruffstuff

sased

Those are used 38's but they only measure to 36.5"...picked them up for cheap on CL to mock up the build and use during summer. I will be running either 37x12 Rockers or 37x13 Boggers when muddin season comes back around.

this will be about 3 to 4 inches shorter...looks way tall... you can get away with fender flares instead of using those ugly flaps

Something about mud mixed with flex.! Devonianwalk

thanks Nismo...looks like things will be just fine...just had to add adjust a few things around... Here is a few more pictures

please do...thanks.!

looking very clean...

face palm...lol We did take a lot of measurements and mocked up the axle and springs before completely welding it up the hanger...but now that i think about it...i should have waited for everything being at complete mock...

Devonianwalk.!

Front Nismo Hanger is welded on and painted...ill get some better angle pictures this will be up for sale..