stalker

well, this is hard stuff...im no master fabricator and this stuff take a long time to do.! Cutting the final piece today for the front then finishing the mounting brackets...then off to the rear bumper

Hello..!! is a R50 really going to take the TOTY.? guys/gals go vote for WD21

good thing about building your own is that knowone will have the one you have...good luck, its a lot of fun

ill take one...shipped to 97504...let me know what i need to do

shaved corner marker lights this should be interesting...i have seen them on lowrider HB...i am going to give it a try on the pathy...figure it will save on corner lenses..i have already broke the pass/side twice

picked up and wired 100W KC daylighters...waiting to mount them on the bumper

just a little more tweeking to get the angle right then i will have it mounted

yea...stripping the axles out of her...

Just got done with the base to the front bumper....pretty solid so far...need to cut out the 2" receiver for my winch and a light bar and blinkers...I'll post up some pictures in the morning

2 kicker CVR 12" in a sealed box 3000 watt Boss amp...probably only 800 true watts...lol JVC deck pioneer mids and tweets

i have been thinking about running the 44 rear as well...i figure gears and parts will be more available and with a better price...

for my SAS project..!! this is probably about a 6 months away from being Dana 44 front and rear

you know how much steel is these days...i could only afford that much..lol

40 series...sounds clean

i dont know much about the VW but it is a 1974 ragtop.

finished replacing both axles, upper and lower ball joints, idler arm, green machine is in and operating perfect, installed the flowmaster and sounds great, working on the aftermarket trans cooler, cut the base for the front bumper and working on a mount for the Warn winch...figuring out the angles to the bumpers is a lot of work, be prepared for new ideas and lots of changes as you go...lol

They measure 33.6" I guess u can say that's a true 33" Just got done with a bunch of work...it's late but I'll post some pictures tomorrow

33x10.5x15

if the tube will be on the truck you might as well use them right...i think ill give it a try later down the road... any moister issues you had with this design?

what does that mean.? this is an old trick that i am just hearing about?

Does anyone have any experience making their roll cage an air tank.? How much pressure does yours hold and is there a big problem with water in the cage.? I figured you could just have multiple drain plugs and could just hook the compressor up to it every few weeks and blow it out. sounds like it would be a great space saver.

AK9849cy: man you are making those Nissans look sick all SASed out...i really dig your post about family.! thats what its all about...

94 pathy 157,000

so if everything works out right ill get the Dana44 for frrreeeee...nice