edicer2

I was talking to Adam...i have red ac coils so i guess a member screwed me whenhe said it was a 3" lift and not the 1.5" one....guess ill be looking to get ne springs and reindex my tbars. Might just do the body lift now too.

soo...i have the ac 3" lift and i just looked at my panhard bar and mines only slightly slanted. Yours has way more angle than mine....crap! lol maybe i didnt need a panhard drop bracket then. wonder if mine saged or something. I almost think if i put that in it might make my pan hard lower than level.

i think the temp prob is on the lower intake manifold on the driver side right? thats where it is on my z31 anyways for your other problem I think its a heat sheild still they can feel solid but still rattle i chased the same problem on my old pathfinder for months until i just tore them all off!

i am guessing the bolts go all the way through the frame holes you would drill out then with a nut and lock washer on the other side?

are those direct bolt on?

o so this is where he got it! I want one!!!

ha oops didnt notice the year it was

Just take a screw driver and losen the bolt on the dizy and move it one way or the other and tighten it and try it and see if it gets better or not. I am not sure if u can do it while its running so thats why i say loosen adjust then tighten and then try it...others might say its ok i am not sure I actually went through the whole thing of taking the dizzy off and reinstalling it with piston one at TDC (top dead center)and that fixed my problem

yeah i have the randomly locking locks also when its cold out and it sucks but im way to lazy to tear rear panels off and looks for it. to bad that part is so spendy from the dealer i would just get a new one

that looks great i might have to invest in them? I have kind of changed my dash color but would like it brighter like that...did you get them at superbrightleds.com? Did you do it to your climate control too? You dont happen to remember what size bulbs they are and how many do you?

Thanks! yeah thats all i have them wired to right now anyways my high beams have always caused me to many problems (even when they were regualr bulbs) and they are so bright on low beam i would never need the highs.

did u crank the torsion bars at all?

i just bought one but noticed it has a hardbody picture in it instead of a pathfinder one. O well i guess hopefully it all works! Mine came with some clips and stuff that hold it on. install(pics from seller) I would install it the same but im afraid to touch my center vents ik mine are really brittle lol

SOOOO happy i was able to fix my projector headlights! i ditched the ****** wireharness that came with them and made my own...they work great now

So few shots of the orginal problem( sorry the lights are too bright for my droid to pick up the cut off lines but you get the idea and the after

I got it!!! So i found out it was stuck on high beam. So i looked at the wire harness that came with the kit and found which wires connected to the projector then i cut that part off the orginal harness. I then connected it to the projector and striped the ends that i had cut and extended the wires. I then hooked up one to pos and one to neg on the battery really really quick. The projector went click click click and then popped to low beam. So i just drove and i didnt get flashed or anything it works great and the cut off is nice and low again!

projector headlight worked tonight correctly so there might still be hope for them!!!! Also bought a JDM clinometer from a terrano off ebay.

i did the exact same thing to my 93....will be doing the same to the 92 soon! looks good my old 93

yeah i thought so too it hasn't worked correctly from the beginning though. I have completely rewired it and it seems to keep sticking in high beam im not sure. when i turn the high beam on the lights turn off which doesn't make sense since they are bixexon and are wired to the high beams and low beams but my passenger low beam looks just ,ike that high beam so i think thats what the problem is.

my low beam on the drivers side looks like the one on the right and my low beam on the passenger side looks like the one on the left which looks its suppose to be a high beam so i think its suck on high beam....if i could get it unstuck i would keep them.

yeah i thought about getting the hardbody grill because they have direct bolt on headlights with projectors that would replace the ones in the headboard grill but i wasnt a fan of them. I would keep these if the passenger side projector didnt have a broken cut off. I was looking on their page and noticed these havea high and low beam. Well the low beam has the great cut off like the drivers side and the side with the bad cut off looks like the picture of the projectors on high beam mode. so i think its stuck on high beam or something dumb like that and i am not sure how to make it go to low beam.

BAD NEWS.....so pretty much the kit failed today. I was not able to fix the one projector that had the bad cut off line no matter what i did and the halos and the evil eyes all died and quit working. I think i am just going to have to take it all apart and revert back to the ****** original setup unfortunately. I guess i talked up a good product to soon. I would personaly keep it if i could get the one projectors cut off line to work correctly because the projetor part does work great yet.Sorry i talked up a product so early next time i will have to test it out longer.

o yeah use photobucket and copy the IMG link in here and it works perfect!