MikeV

It's not a neccesity so EMU doesn't bring it up to keep the total $ down for a lift. It will beat down your half shafts though; I have a calmini setup so can't give you feedback on them other than I would trust the guys that say steer away from AC's.

I'd wait a year or 2; then bust a knee on him; or since he is old a hip!-) Patience makes you fall off the radar, so nothing comes back to you; or feed him to some real pigs

Need an R-type emblem on the back also!! Had a local put one on his Z; I think pink 13" walmart spinners were stock on the outback edition

All in the Family beats Whats happening? anyday!-) Beginning of an O2 sensor death?

Firestone premium alignment 189.99 Lifetime alignment & tire balancing!-)

I prefer mobil 1 (and it is FAR easier to get than Amsoil) Nothing wrong with it but nothing supa-dupa either.

transfer case 2 3/8ths qt here is a link to download the service manual http://www.nissanpathfinders.net/forum/index.php?showtopic=5410 page 8 of maintenace (MA) has all the fluid types and qty. lots of other good info in the how to's also Welcome to the fun!-)

http://www.nissanpathfinders.net/forum/index.php?showtopic=9692 You can download the nissan service manual, it is in there. Mike

yep mine ground a little then alot (sounded EXACTLY like a throwout bearing) so I put it off; had to have bearings replaced... syncros and all were fine(rusted frame broke after 3 months though!-) Sound goes away once pressure on the shaft stops it from wobbling.

nothing inside should fall apart as the splined shaft is inside the drivers side wheel well; Tough to lengthen it if you are a rust belter!-) I beat the snot out of mine to get it to lengthen along with PB Blaster and a torch

1. ARB 2. Steve-o 3. buy a Welder!-) I took option 3

I love my Calmini upgrades (even if I had to trim the UCA's to fit my rancho 9000's!-)

Wish I had that much spare time on my hands! I definately wouldn't re-engineer something that works fine already, but I hear Cali is boring enough to push people to do crazy things. It's all the Dank and rice fields burnin'!

Kleenex anyone?

lime away or vinegar (will be fine on glass)

just picked up 2 from Checkers Auto for $40 each (they were in stock even!-) came with new pins,boots...

Ranchos are rough? (if ya mount them upside down maybe!-)

Really sorry to hear that; glad everyone is alright and an X would be awesome-o!!! 'specially if it is already modded somewhat. yer favorite WI @sshole!-)

That sucks, I feel your pain though as my first 95 (whole life in WI salty roads & rear axle separated from frame due to no frame left), but now I call it a spare parts truck! bought another for $2500 with a solid frame and am stripping and POR-15ing the frame so I keep this one for a long time!

yeah I have drums on my rear (lol) have disc on my parts truck (will eventually swap)

Welcome to the forum in the garage section there are How To's (this is actually the last one on page 3). http://www.nissanpathfinders.net/forum/index.php?showtopic=2076 Also search but since your new I didn't want to flame you away!-) also download the Nissan manual here (helps alot) http://www.phatg20.net/index.php?option=co...ry&Itemid=2 I wouldn't drive that thing until you fix the brakes (obviously)

paid $2500 for each of my 95's funny thing is that was 5 years apart & I spent the same $$

Put one of each on and see which sux more Most Pimportantly is the Calmini's match my Millermatic 210 welder!-) That means they are tough!

Selectro Woman & Dynah Girl

without flares and the "wing", ya may as well buy a ghey Cherokee!-) That way you can drive a Box with no curves & fit in with the heeps...