sammyb33

check your PM...i have both u can have... -sam

plus you got the Rough Country UCAs right? if i am correct than they come with grease fittings, so you can pump some grease into them....goodbye squeaky....

i agree.... so 88, when you call him (or can you not call him) what does he say?? why dosent he just give it over to you? -sam

why not bypass the stock amps, get a new deck and run wires from the new deck to the speakers (all 4 speakers...)???? -sam

at this point, not even the mods have the passwords to access the official NPORA site, MrJim, started the site, and now is currently incommunicado, so sorry bud, but your not gonna get your pics or your decals until they can locate MrJim.....

spray that beast off K9sar!!!!!

i think as long as you have a donor truck to swap the ECU, (possibly a crossmember re-arange or swap) and the tranny...i think it can be done... just loads and loads of work...

i was under the impression that a lot of replacement pads do not need shims....maybe im way off...

PB is your friend....if no PB...then WD is your friend...

huh....good to know i guess.... i guess i really didnt think it through...but you can pretty much weld up anything....

is that even possible to weld up a LSD???

hah, yea i already had that bookmarked... yea i hear ya. no i definately didnt want the extra weight...i wouldnt mind some trophies...but i think im going to stick with 3/16 down below, and 1/8 up top...

just wondering what thickness the ARB bull bars/winch bumpers are...3/16th...1/4.... and i see some of you all with custom bumpers...what was to thick..what was to thin?? sam

spolar.....nice sig man...ur pathy looks sweet...

im no good with LED's and such, but my 3rd brake light (high mount stop light) is very dim or dull... is there a way to either beef up the LEDs back there, or to replace them with higher wattage ones??? sam (sorry to jack....)

i dont have any Clamini stuff...but what i have heard is they sell very very noisy bushings... dont kno what else, but all i know is im not ordering from calmini...

im pretty sure they dont come with airbags untill post 95's..... but if i am wrong..i am sorry....

Air bags??? i didnt think ours came with airbags...

thanks spolar...i guess that will be what i am buying next....

i know i feel like i need one, but that because i go on old loggin trails all the time, and they are crazy washboard-y filled with rocks...really jerks the crap outa my arms....feel like an SS would help out a bunch, but again, i would like to hear other peoples ideas on the subject...

thats awesome dude...very cool that you did the swap....

hmmm...u have a 91 right.... cuz i was gonna go out and look on my truck...but i have a 95.....hmmm still gonna go look...

are you sure its a pin, and not just a horribly rouned out bolt head?? possibly by the previous owner...???

he just welded up his differential spider gears. it is sometimes called a lincoln locker because of the brand name of welder "Lincoln" so i dont kno if he has any other diffs, because he dropped the one he was runnin out of his truck, and got that welded up....

ill have to go get a pic...but i took off the lower valence corners (below front bumper) bent up the center valence, and cut the lower fender flare to match. it looks great in my opinion...and killed that rubbing problem. sam