TowndawgR50 Posted November 22, 2016 Author Share Posted November 22, 2016 i cant recall what your older units looked like Link to comment Share on other sites More sharing options...
TowndawgR50 Posted November 22, 2016 Author Share Posted November 22, 2016 Well it was nice while it lasted. After Tuesday I'll finally be moving up to WA so this awesome shop space will be a thing of the past. Got as much done as I could but still have plenty left to install and fab. Rear locker, bumper, air compressor, sliders, rear tire carrier, underbody armor and so on. Made the most of my last time in the shop with the truck and did fluids in preparation of the long haul up. Engine oil, tranny oil/strainer and rear diff oil. Its been fun California....so long. Hello PNW Original strainer? Sizing up the strainer o-ring so I can snag one from the shop. Old LSD oil Link to comment Share on other sites More sharing options...
LittleFR Posted November 22, 2016 Share Posted November 22, 2016 I just installed my "Jacobs Link" with skid plate mounts. Right on, why did I not do that the day I got my R50. Literally took me 5 minutes to measure and 5 minutes to make.... granted i used a torch. 4 Link to comment Share on other sites More sharing options...
TowndawgR50 Posted November 29, 2016 Author Share Posted November 29, 2016 So I made it up to WA without too much trouble. Ran the KM2's anticipating snow at the Siskiyou pass but it was just rain and fog thankfully, despite temps in the low 30's. Horrible gas mileage was the result. But peace of mind and not having to jump out and throw chains on my towing tires was priceless. Overall it was about 18hrs of driving with TONS of rain and traffic on thanksgiving day. The standing water on the freeway in Portland was insane. Was hit with tidal waves coming from the traffic going the other direction and had to drive blind for a moment while the wipers ran at max trying to evacuate the water....scary stuff. Was able to load just about everything in my uhual and keep a space for a foam pad to sleep very comfortably Wednesday night in the back of the truck. Fueling up just before the Siskiyou pass in 33 'F weather with high winds Resting place for the night Made it The truck fits in the garage!!! (just barely) 5 Link to comment Share on other sites More sharing options...
TowndawgR50 Posted November 30, 2016 Author Share Posted November 30, 2016 Got my registration and plates taken care of. Emissions test here was faster than a coffee house drive-thru window. And cheap as hell. 2 minutes and 15 bucks later and I had the paper I needed to get tabs and plates. Which immediately made me think of all the goodies I can get now that are illegal in CA...headers, test pipes etc. They didnt even do a visual or lamp and brake inspection or any kind of vehicle verification at all. It was all paper based. Im so used to the CA way of vehicle ownership this all seems so easy and quick. The emissions test was just an OBD2 scan to verify I had no active CEL. Mind=blown The DMV was almost as quick and easy. No wait, no fuss and best of all, NICE PEOPLE. Why are all CA DMV clerks idiots w a massive chip on their shoulder? Oh well, doesnt matter anymore. HELLLOOO PNW!! 2 Link to comment Share on other sites More sharing options...
hawairish Posted December 1, 2016 Share Posted December 1, 2016 That's why CA sets the (sub)standard. AZ is basically paperless, and it's awesome. Emissions process is super simple, good for 2 years on some vehicles, and is only required for Phoenix and Tucson area residents. You can even view real-time station wait-times online. Almost everything MVD-related (yeah, not "DMV" here) can be done online: vehicle registrations/renewals, DL updates/replacements, temp plates, sold notices, etc. Hell, just earlier in the year I needed them to overnight me a replacement driver's license...and they delivered it, on-time. They've come a long way since telling me my CA birth certificate was invalid when I first moved here in 1996... When I returned in 2010, they asked me if I wanted the same license picture I took in 1998 (when I was 18). Tempting, but no thanks. Glad you made it up there ok. Your posse, however, seems a little less enthusiastic. Link to comment Share on other sites More sharing options...
hawairish Posted December 1, 2016 Share Posted December 1, 2016 AZ is basically paperless, and it's awesome. Ha, what timing...I just got my renewal email today. Link to comment Share on other sites More sharing options...
TowndawgR50 Posted December 1, 2016 Author Share Posted December 1, 2016 (edited) Haha, nice. Yea, its a whole new approach to vehicle ownership for me. The "DMV" here is strange for sure. There are 2 departments- Licensing and vessel registration. I got my WA license from the licensing group which is state run and the registration portion is through a 3rd party, at different locations, which takes care of plates and the likes. Both were unbelievably fast. I had to go to the main building in downtown Seattle for my plates because they were personalized and anticipated CA style long waits and grumpy service. When I got there of course there was no parking except for public pay garages so I coughed up 12 bucks for 2 hours expecting long lines and run arounds. Got into the office and saw a huge line out the door but as I walked closer learned it was for taxis and uber folk and the vessel reg line was empty. In and out. Unreal. 12 bucks down the drain. Lol. To top it off you can get all your outdoor passes needed, which kinda sucks because WA makes you get passes or permits for any outdoor parking. And there are like 4 or 5. Discover pass, wilderness pass, Mt rainier pass etc....Its kinda weak but I picked up the discover pass which covers most of the wilderness areas around me ( I hope) Edited December 1, 2016 by TowndawgR50 Link to comment Share on other sites More sharing options...
LittleFR Posted December 2, 2016 Share Posted December 2, 2016 Just come to Kentucky. The only inspection is a VIN match check, and that's only if you bought it out of state. Otherwise you walk in with ins card, the title and the old license plate. However if it hasn't been plated lately then no plate required. Similar process to get a a rebuilt title. No smog no brakes nothing... You can actually trailer it to courthouse if you bought it out of state with or without an engine. Link to comment Share on other sites More sharing options...
TowndawgR50 Posted December 4, 2016 Author Share Posted December 4, 2016 (edited) Christmas tree prospecting in the Mt Baker Snoqualmie national forest with a local Suzuki club. The truck did really really well on the KO2's. Good times. Edited December 4, 2016 by TowndawgR50 6 Link to comment Share on other sites More sharing options...
Mrelcocko Posted December 4, 2016 Share Posted December 4, 2016 Awesome Pics! Sent from my SM-G530T using Tapatalk Link to comment Share on other sites More sharing options...
Mrelcocko Posted December 7, 2016 Share Posted December 7, 2016 Welcome to the site. Love the pics! Nothing like the r50! sent by MrCox in Knoxville, TN 1 Link to comment Share on other sites More sharing options...
TowndawgR50 Posted December 7, 2016 Author Share Posted December 7, 2016 Thanks! Link to comment Share on other sites More sharing options...
haydenmidd12 Posted December 8, 2016 Share Posted December 8, 2016 where did all of y'all get your SFD kit from and if its custom is there any way someone could build one for me and I will pay how ever much because KRfabs checkout wont let me order one because of there website but not really sure but if someone can please let me know. if so please email me. My email is Hayden.middleton@ymail.com Link to comment Share on other sites More sharing options...
NIssanBoston Posted December 8, 2016 Share Posted December 8, 2016 where did all of y'all get your SFD kit from and if its custom is there any way someone could build one for me and I will pay how ever much because KRfabs checkout wont let me order one because of there website but not really sure but if someone can please let me know. if so please email me. My email is Hayden.middleton@ymail.com He stopped making sfd's, as i know me and another memeber are the last people to order krfabs only kits he had left. He told me when i bought it hebwas stopping production. Sent from my SM-G530T using Tapatalk Link to comment Share on other sites More sharing options...
mjotrainbrain Posted December 8, 2016 Share Posted December 8, 2016 where did all of y'all get your SFD kit from and if its custom is there any way someone could build one for me and I will pay how ever much because KRfabs checkout wont let me order one because of there website but not really sure but if someone can please let me know. if so please email me. My email is Hayden.middleton@ymail.com I know there is somebody making them, and it really bothers me that I can't find their website...hopefully somebody else knows what it is. But yes, somebody makes one and if I remember right they charge $425USD. Link to comment Share on other sites More sharing options...
TowndawgR50 Posted December 8, 2016 Author Share Posted December 8, 2016 (edited) If you have some time and space,a welder, drill, protractor and a saw capable of cutting metal you can make the kit yourslef. you'll need to make: 4 blocks to space the subframe 2 engine blocks 2 strut spacers 1 Panhard drop bracket you'll need to buy: steering link extension extended brake lines various hardware i think thats everything.. the subframe spacers are super easy to make, cut the box tube to length and drill holes spaced accordingly. the strut spacers need 8 degrees of angle with identical bolt patterns on the moubting plates that mimic the strut mounting plate design. You buy the steering extension from a US based company whos name I forget right now. the brake lines can be had from a local autozone or O'Reilly and are listed as stock lines for different nissan vehicles, frontier rear lines and Rouge front lines. This is if u want to build it yourself and save money. I completely understand the desire or need to just pay for a complete product sometimes. Edited December 8, 2016 by TowndawgR50 1 Link to comment Share on other sites More sharing options...
Snowboarder12345 Posted December 8, 2016 Share Posted December 8, 2016 Woodward steering, Part numbers- UA201113, UA201108, and you'll need a UAD lenght of 5 3/4 for a 4" sfd Link to comment Share on other sites More sharing options...
XPLORx4 Posted December 8, 2016 Share Posted December 8, 2016 Woodward steering, Part numbers- UA201113, UA201108, and you'll need a UAD lenght of 5 3/4 for a 4" sfd You have to call them. Tell the woman who takes your order it's for a Nissan Pathfinder lift kit. I spoke with her last month and she should remember the conversation and know what you'll need. Link to comment Share on other sites More sharing options...
haydenmidd12 Posted December 9, 2016 Share Posted December 9, 2016 You have to call them. Tell the woman who takes your order it's for a Nissan Pathfinder lift kit. I spoke with her last month and she should remember the conversation and know what you'll need. so call up there to order the lift or the steering linkage Link to comment Share on other sites More sharing options...
haydenmidd12 Posted December 9, 2016 Share Posted December 9, 2016 and if i have a 4inch tall block for the subframe how tall does the engine block need to be Link to comment Share on other sites More sharing options...
TowndawgR50 Posted December 9, 2016 Author Share Posted December 9, 2016 Call for just the link. All blocks must be equal length Link to comment Share on other sites More sharing options...
haydenmidd12 Posted December 9, 2016 Share Posted December 9, 2016 what about the strurt spacer does it need to be 4inches also? Link to comment Share on other sites More sharing options...
XPLORx4 Posted December 9, 2016 Share Posted December 9, 2016 what about the strurt spacer does it need to be 4inches also? Yes. Link to comment Share on other sites More sharing options...
TowndawgR50 Posted December 13, 2016 Author Share Posted December 13, 2016 8 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now