flnl Posted August 27, 2010 Share Posted August 27, 2010 No one has bought & installed them ? Link to comment Share on other sites More sharing options...
KovemaN Posted August 27, 2010 Share Posted August 27, 2010 Not really easy. You have to make sleeves for the bushings. I used 1" diameter nylon rod, cut them to length and drilled them big enough for the bolts. Link to comment Share on other sites More sharing options...
Nismojunky Posted August 28, 2010 Share Posted August 28, 2010 just put the control arms on and don't crank the torsion bars too much. leave an inch between the UCA and the upper bumpstop and you should be fine. most people wreck cv's because they don't replace torn boots an inch a ive got about a 1/4 inch hehe sorry for thread jack Link to comment Share on other sites More sharing options...
flnl Posted September 1, 2010 Share Posted September 1, 2010 Not really easy. You have to make sleeves for the bushings. I used 1" diameter nylon rod, cut them to length and drilled them big enough for the bolts. Just ordered a set of them, maybe in 2 weeks they will be here so I can install 'em. Link to comment Share on other sites More sharing options...
ILoveMyPatty Posted September 5, 2010 Share Posted September 5, 2010 Though I like AC, after reading about their arms, I wouldn't buy theirs. Get Rough Country arms, about $60 more. Search the forum for info. BTW, share a pic of your front shock setup. Link to comment Share on other sites More sharing options...
madhornet Posted September 6, 2010 Share Posted September 6, 2010 its about 6 hour job to put in the diff drop but it helps i have put in the ball joint spacers and yes they will ruin your oem upper control arms i had to strengthen mine after they cracked in only days of use i have not been able to afford any aftermarket UCA's but my reinforced oem's are great after 2 years now in total i am 3" up in the front with re indexed t-bars and the 1" spacers Link to comment Share on other sites More sharing options...
Yendor Posted September 6, 2010 Share Posted September 6, 2010 How did the spacers ruin your UCAs? Link to comment Share on other sites More sharing options...
GrimGreg Posted September 6, 2010 Share Posted September 6, 2010 How did the spacers ruin your UCAs? 88 had the same issue, they can cause the mount plate protion to twist. Link to comment Share on other sites More sharing options...
madhornet Posted September 10, 2010 Share Posted September 10, 2010 88 had the same issue, they can cause the mount plate protion to twist. bingo!!! after i reinforced them they are a ok but i would have bought an aftermarket set if i had the money Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now