TerranoNZ Posted January 10, 2010 Author Share Posted January 10, 2010 Wonder if Kiwipete got a pic of a Cape Reinga sign Link to comment Share on other sites More sharing options...
kiwipete Posted January 11, 2010 Share Posted January 11, 2010 We were only 1452 kms apart. I did 3500k's all up! 90 Mile beach at the northern end. Link to comment Share on other sites More sharing options...
TerranoNZ Posted January 12, 2010 Author Share Posted January 12, 2010 I'll see your post Oreti beach out of Invercargill Link to comment Share on other sites More sharing options...
kiwinoz Posted February 20, 2010 Share Posted February 20, 2010 Hi Kiwis Can someone tell me what gearbox the Manual Terrano TD27T has. FS5r30a or ??5w71c ? I know the V6s have the FS5r30a (bigger) gearbox. I have Pathfinder Z24 & 5sp. Thanks Link to comment Share on other sites More sharing options...
kiwipete Posted February 22, 2010 Share Posted February 22, 2010 Morning Kiwi's. I have posted this in the Aussie section too and will also ask here for your input. I am after some reasonably priced flare rubber to replace my plastic flares I have removed. I am gett ing some new Maxxis Bighorns (33's) and need the extra fender clearance, hence removal of the plastics was necessary. Have any of you sourced or seen anything suitable? I really like the Bushranger type with the steel reinforcing wire in them, but they are way too expensive. Link to comment Share on other sites More sharing options...
long Posted February 25, 2010 Share Posted February 25, 2010 Head to the warehouse and buy there garden edgeing its made from recycled rubber and you get around 10 meters for about $20.oo its 75mm wide other places have wider tho. Compared to the bushranger ones you could replace them a few time at that price. Hope it helps out Link to comment Share on other sites More sharing options...
kiwipete Posted February 25, 2010 Share Posted February 25, 2010 Those hard rubber garden edging strips will rip mu guards to bits should I make contact with a clay bank or deep rut. That is precisley why I asked about the moulded rubber flares thanks. Its worth paying a little extra for something that will have some give. I broke one of the original flares and that caused damage to the fender, garden edging wont be any different IMHO. Link to comment Share on other sites More sharing options...
kbjj Posted March 22, 2010 Share Posted March 22, 2010 Hi, thought I better introduce myself. I live in Rangiora and work in ChCh. Well... I turn up and they pay me, does that qualify? Iv'e recently finished doing an SAS on my 86 D21 Navara because I was sick of breaking it. I run 35 inch Silverstones for play and 33 inch whatevers for roadys. Truck is set up for family and friends, camping and adventure. I enjoyed the few tracks Iv'e been on around Refton area and am looking for more. My first trip after SAS was up the Ashley Gorge. A couple of dents and alot of fun. Even drowned a Safari. Have a look at my pics in the "SAS Hardcore Fab" section. I'm waiting for my new EGT guage and sensor to arrive so I can start to play with turbo boost and fueling. TD27 can handle 15 psi safely I'm told. Yea Ha... more ponnies... I can't wait. Link to comment Share on other sites More sharing options...
TerranoNZ Posted March 24, 2010 Author Share Posted March 24, 2010 Hey man, Welcome to the family There's a few of us in Chch. My brother lives in Rangiora. Damn nice job you made of that SAS I plan on doing the same if I ever get enough money. Link to comment Share on other sites More sharing options...
disfordog Posted March 26, 2010 Share Posted March 26, 2010 I'll see your post Oreti beach out of Invercargill Duuuuude!! no way! Bluff is my home town! I haven't driven 90mile beach either, but always wanted to get the truck up there.. I always seem to be on band-camp in a rental Ford Transit when I trip north of Auckland.. d is for dog is back in the house after an extended break! And hopefully finishing off some mods asap.. Link to comment Share on other sites More sharing options...
disfordog Posted March 26, 2010 Share Posted March 26, 2010 Wonder if Kiwipete got a pic of a Cape Reinga sign Ha!!! My old stomping ground! Link to comment Share on other sites More sharing options...
TerranoNZ Posted March 26, 2010 Author Share Posted March 26, 2010 Good to see you back in these parts Dog Love the new sig Link to comment Share on other sites More sharing options...
DavefromOZ Posted March 26, 2010 Share Posted March 26, 2010 Get your post count up D, that there is a TOTM winner if I ever saw one. Link to comment Share on other sites More sharing options...
4X4pathy94 Posted April 7, 2010 Share Posted April 7, 2010 (edited) Hey, guys nice rig disfordog... Well im interested in the LOKKA... So i was wondering how might i go about getting one of these, bc the site i visited doesnt seem to sell them. Oh and if anyone has used this front lokka i would like to know how well it works and what you payed for it.. Thx from Canada Edited April 7, 2010 by 4X4pathy94 Link to comment Share on other sites More sharing options...
TerranoNZ Posted April 8, 2010 Author Share Posted April 8, 2010 To be honest, I would try Steve @ http://ruggedrocksoffroad.com/pathfinder-differential-lockers-c-38_222.html I see he does the Richmond lock right, which I believe is the same parts as the "LOKKA" brand. He's a great guy and more interested in getting you what you need than what he wants to sell Front? I can say I know anyone using a mechanical locker in the front. I've got one in the rear and it works great. Search around the forums for a bit, lockers have been covered loads of times Link to comment Share on other sites More sharing options...
kbjj Posted April 12, 2010 Share Posted April 12, 2010 Hey, does anyone in NZ or Ozzy deal with TD27 5 speed gearbox, transfer case crawler gear kits? Is there any other crawler gear options (keeping it road worthy). Atlas transfer cases cost too much. Cheers Link to comment Share on other sites More sharing options...
long Posted April 14, 2010 Share Posted April 14, 2010 Along KBJJ to the mad house i think im sure gonna go look at your SAS im looking at doing the same thing to my 3 door Terrano. A quick ask for all of you out there i can get a LSD diff for $100.oo u think its a good buy oh n i can get the motor n auto for another $200 ? i think its a steel so im gonna get it. The Terrano was put on its side i guess as long as the motor wasnt running for to long it should be ok ?. Gary Link to comment Share on other sites More sharing options...
TerranoNZ Posted April 14, 2010 Author Share Posted April 14, 2010 Hey Long, it's been a while. Great deal I'd say, just make sure that it's the same ratio as yours Look @ the body tag by the brake booster Link to comment Share on other sites More sharing options...
DavefromOZ Posted April 14, 2010 Share Posted April 14, 2010 Along KBJJ to the mad house i think im sure gonna go look at your SAS im looking at doing the same thing to my 3 door Terrano. A quick ask for all of you out there i can get a LSD diff for $100.oo u think its a good buy oh n i can get the motor n auto for another $200 ? i think its a steel so im gonna get it. The Terrano was put on its side i guess as long as the motor wasnt running for to long it should be ok ?. Gary Thats about 70 bucks AUD, thats a steal. Link to comment Share on other sites More sharing options...
sigiran Posted June 22, 2010 Share Posted June 22, 2010 I see there is a heap of us on here now that I have looked and been told that Kiwi's are around. Hay guys I am up AKL but from down south I am looking to create more power in my non turbo 2.7 any one able to help? Link to comment Share on other sites More sharing options...
sigiran Posted June 22, 2010 Share Posted June 22, 2010 Also looking for some manual locking hubs for this wagon Link to comment Share on other sites More sharing options...
long Posted June 24, 2010 Share Posted June 24, 2010 Also looking for some manual locking hubs for this wagon Fumigate it with LPG you can get up to 40% more power but its a fine line between go n blow so be careful if you want the link as to how to do it let me know n il will post it up 4 you. Link to comment Share on other sites More sharing options...
TerranoNZ Posted September 7, 2010 Author Share Posted September 7, 2010 Our Earthquake aftershocks in context Not quite 24hrs NZST: Tue, Sep 7 2010 9:08 pmMagnitude: 3.9 NZST: Tue, Sep 7 2010 9:07 pm Magnitude: 3.8 NZST: Tue, Sep 7 2010 8:52 pm Magnitude: 3.9 NZST: Tue, Sep 7 2010 8:28 pm Magnitude: 3.5 NZST: Tue, Sep 7 2010 8:08 pm Magnitude: 3.4 NZST: Tue, Sep 7 2010 6:40 pm Magnitude: 3.8 NZST: Tue, Sep 7 2010 6:36 pm Magnitude: 4.2 NZST: Tue, Sep 7 2010 6:04 pm Magnitude: 3.2 NZST: Tue, Sep 7 2010 4:56 pm Magnitude: 3.1 NZST: Tue, Sep 7 2010 3:04 pm Magnitude: 3.3 NZST: Tue, Sep 7 2010 1:07 pm Magnitude: 3.5 NZST: Tue, Sep 7 2010 1:04 pm Magnitude: 3.1 NZST: Tue, Sep 7 2010 11:36 am Magnitude: 3.9 NZST: Tue, Sep 7 2010 10:11 am Magnitude: 3.1 NZST: Tue, Sep 7 2010 8:24 am Magnitude: 3.4 NZST: Tue, Sep 7 2010 8:14 am Magnitude: 3.6 NZST: Tue, Sep 7 2010 6:22 am Magnitude: 3.5 NZST: Tue, Sep 7 2010 5:17 am Magnitude: 3.3 NZST: Tue, Sep 7 2010 5:14 am Magnitude: 3.9 NZST: Tue, Sep 7 2010 4:17 am Magnitude: 3.5 NZST: Tue, Sep 7 2010 3:24 am Magnitude: 5.4 NZST: Tue, Sep 7 2010 3:14 am Magnitude: 3.7 NZST: Tue, Sep 7 2010 2:52 am Magnitude: 3.1 NZST: Tue, Sep 7 2010 1:39 am Magnitude: 3.4 NZST: Tue, Sep 7 2010 0:51 am Magnitude: 3.9 NZST: Tue, Sep 7 2010 0:47 am Magnitude: 3.5 NZST: Tue, Sep 7 2010 0:21 am Magnitude: 4.7 NZST: Mon, Sep 6 2010 11:54 pm Magnitude: 4.2 NZST: Mon, Sep 6 2010 11:47 pm Magnitude: 3.7 NZST: Mon, Sep 6 2010 11:40 pm Magnitude: 5.4 NZST: Mon, Sep 6 2010 11:38 pm Magnitude: 4.0 NZST: Mon, Sep 6 2010 11:24 pm Magnitude: 5.2 NZST: Mon, Sep 6 2010 11:14 pm Magnitude: 3.7 NZST: Mon, Sep 6 2010 10:21 pm Magnitude: 3.6 NZST: Mon, Sep 6 2010 9:20 pm Magnitude: 3.5 Link to comment Share on other sites More sharing options...
Thumper Posted September 29, 2010 Share Posted September 29, 2010 (edited) Well- Gidday fellas Its been well over a year since I was on last. Been overseas working (my arse off) and am now back in sunny old Blenheim. And DAMN am I pleased to be back in NZ. Fired up the Terrano (old Ted's been in storage for 14 months and was a bit sulky on it at first but I showed him the hills and he perked up ), grabbed the rifle and away we went. Have now fitted a new set of mudders, finally got tha snorkle on and straightened out the well buggerised bull bar and he was rareing to go Body lift siting in the shed to go in next and probly sort out fitting on the winch that for the last year has been on its end holding the bike trailer level Damn good to be back and looking foward to having a bit of a say so every so often Some of the rigs are looking mint so I see everyone has been busy and getting out there doing it to it Cheers fellas Edited September 29, 2010 by Thumper Link to comment Share on other sites More sharing options...
long Posted October 3, 2010 Share Posted October 3, 2010 Welcome home n back on the message board Gary Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now