Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Alkorahil

Vendors
  • Posts

    2,950
  • Joined

  • Last visited

  • Days Won

    36

Everything posted by Alkorahil

  1. 11 Crank Angle Sensor/Camshaft Position Sensor. 12 Air Flow Meter/Mass Air Flow Sensor. 13 Engine Coolant Temperature Sensor. 33 Heated Oxygen Sensor. Its almost like you unplugged a harness by accident and didnt realize it..... Did you have the battery disconnected while doing this work? Did the CEL come on as soon as you started it up?
  2. Yep.... $24.13 And our shipping charges are less....
  3. Yeah VERY big pain. I would shy away from having one shipped. I would bet money it will get damaged in shipping. As stated above, they are VERY easy to damage. Essentially just paperboard/cardboard with glued cloth over it. When we do a headliner here they pull all the seats out to have some room to work. The one on the Armada is the wost.....
  4. Its just so super-mega clean inside and out! Great job! You really have a gem there. But inquiring minds want to know......how clean is your engine bay......notice there arent any pics of it........are you hiding your (literally) dirty secret??
  5. It has been my experience on these vehicles the sensors you get aftermarket will not last long. I have seen this many times with ones from OReilly's (specifically). They last about 6 month then fry and then the customer is coming to me to just get a new one because they are fed up. I believe part of the reason is you have to break one of the seals on the original distributor to replace the sensor and over time moisture gets inside, and/or that they are not up to par quality-wise. Just IMHO......
  6. If you do not replace the faulty cannister with a new upgraded part, it will continue to eat up the control valves attached to it........
  7. I always strongly recommend to everyone whenever you replace struts always replace the bearings and mounts, these parts get the most wear and are constantly in motion. visually inspect the other parts for rust and wear and replace if necessay.
  8. was that negative??

  9. If it seems it really is coming more from the outside of the vehicle at the fuel filler door then one of the rubber evap lines on the filler neck is cracked/rotted or has a loose connection from age or your filler neck is rusting. The smell will be strongest right after a fill up and will go away after about 1/3 a tank. Second thing to look at would be the seal for the fuel pump. This would give you more of a smell from the rear cargo area floor. Third to check would be the evap lines from the evap canister to the fuel pump being old/rotted/cracked. With the above two the smell will not go away after the fuel level goes down as with the first scenerio.
  10. We are in Dallas. Shipping ground insured would be $8.95.
  11. The good news: 1. the plastic covers on the hood cowl. I recently lost one while going through the car wash? Can I purchase these anywhere? 66814-0S700 FINISHER, COWL, RH $24.64 (MSRP: $33.67) 66815-0S700 FINISHER, COWL, LH $24.64 (MSRP: $33.67) 66814-01G00 CLIP, COWL FINISHER $0.62 (MSRP: $0.92) QTY NEEDED: 6 2. door arm rest pad, need them in blue 80940-07G01 ARMREST, RH $70.28 (MSRP: 96.02) 80941-07G01 ARMREST, LH $70.28 (MSRP: 96.02) We stock these, they are still available from Nissan. Your local dealer can also get them. (they will probably charge the MSRP or higher) The bad news: 3. Dash cap in blue? is this something that is easy to replace? 68200-75P01 DISCONTINUED, NO LONGER AVAILABLE. (MSRP: $617.84) 4. Trip meters? both have stopped working but the speedo and mileage meter work fine 24877-78P09 DISCONTINUED, NO LONGER AVAILABLE (MSRP $208.08) Many states have laws governing replacing/repairing odometers. Your local dealer may be able to send it off to be serviced (repaired) You may also check for local cluster repair shops to assit in repairing it. Alternately, a salvage yard may sell you a cluster.
  12. Trim Code K is the Nissan color code for 'Grey Interior', the shades of grey differed as noted above from 1987-1993 and 1994-1995. Its very confusing sometimes! If you really want confusing, try the D21 truck. The Hardbody has 4 shades under trim code K up to 1997. (light gray, dark gray, brownish gray and black) Nissan cleaned all this mess up after 1998, but that only helps some of us here! After 1998 code K is 'Dark Gray' I have a D21 hardbody 95 light grey set from a hardbody if they want it I can send. PM me if it is needed.
  13. I understand OME has a nice lift kit for the newer Pathfinders.
  14. On the 96-2000 pathfinders the charcoal cannister failing and destroying the purge control valve on the cannister is a common problem. You must replace both the cannister and the valve at the same time.
  15. The only reason I would ever take my vehicle to a quick lube place is for a state inspection. cheap oil, cheap filters, as well as just outa high schoolers working on cars that cut too many corners too often accross the board. The dealership has a standard to meet in oil used (IE approved my the manufacturer) and the filters are stock, plus more concern about things like....liability from damage and complaints to the manufacturer can cause them bad marks. I think it is best to point out......you get what you pay for, auto stuff is no different.
×
×
  • Create New...