Ramithepimp77

15x8s... The guy was like U want 15x7s or 15x8s? Im like UHHHHHHHHHHHHHHHH... So hes llike "I would prolly run 15x8s" So I said "WHATEVER" and bam they were done. Rami

Some guy sold it to me behind K mart he said he stole it from YOU!!! JK JK JK my buddy sold it to me. It came out of his VW Jetta that he wrecked and now hes got a WRX and doesnt want to switch decks. He also wanted to sell me a kicker comp 15 or somethin and box for 200 but I dont have money. Rami

Oh ya I got that deck for 50 bucks. I thought it was a good deal until I saw the same one at circut city ON CLEARANCE for 200 then I thought it was a GREAT deal Rami

This is my deck that I got a while back. Sure beat the old Kenwood tape deck that was in there (didnt even work) I switched out the kenwood for a clarion then to the sony Xplode deck (which I lost the remote to) Rami P.S. Dont worry Hardwaretoad I dont have subs either. Guess we will have to keep hittin our door panels for bass.

After dealin with my tires going flat every other weekend and eventually every 4 days I went out and got myself some new tires. This is what I had. 31x10.50s Lemans All-Terrains. Those tires were not that bad WHEN THEY HELD AIR!!! (notice how shinney my pathy is there? Well thats because I bought it in the early morn and cleaned it for HOURS) This is what I just got. BFG Mud-Terrains 31x10.50s on the black steel rock crawler rims I think??? Another... So far Im happy with them other than the fact that they rub on the fenders. befor... after... Even though they are the same size they are still rubbing a little on the sharper turns (or when Im bouncing up and down at sand lake). could it be that my T-bars need to be cranked a little or what??? Anyone else have that prob? Rami

I had the same problem. It just recently stopped randomly. I got my starter/batt/alt all checked after I changed my alt and the guy said everything seems to be good but I dont belive him since my S*** WASNT STARTING CORRECTLY! I have been told a few times that it could be my batt. My alt was overcharging apperently and the day I changed it the batt was like BLOWING up, it was expanding which was kinda scary. Ever since I changed the alt the batt hasnt done anything. I am gonna change out my batt here soon and see if everything goes well. Rami

I was REAL scareed about it rollin over too. My ECU was toast I guess. I took it out, cleaned it for 2 days straight (while at work) dryed it and I got nothin! I went to U-pull it and got another ECU for $135 (10 dollar core) and put that bad boy in. I didnt get any codes either so I was happy. The reason my plate is bent like that is it seems to cool the radiator alot. JK JK JK JK! I, along with my buddy Darrick with an 86.5 hardbody went down a trail earlier that day and I ended up comming down on somethin that was under water. So the damages for that day was bent plate, cracked fog light, power steering belt came off, and ECU was done for. It was worth it though. Im gonna start to post more and more pics now that im learnin how to upload and update sites and stuff. Its not as hard as I thought it would be. Rami

They are on the roof? CRAZY!!! Is that only in the 4 doors? Man im missin out! Rami

Happens to the best of us. Wouldnt mind relocating that bad boy either. Rami

Samuaris ROCK! Rami

Is it spendy? Rami

Ya it was cuz there were signs. Heck ya it was a "hoot"! FUN TIMES! Rami

Hey hey hey whats happenin? I have a friend that has a early 90s JC (i think its early 90s) well N-E-WAYS every time I ask him to go wheelin he says "YA LETS DO IT!" "SURE IM DOWN" and "ILL PULL YOU OUT WHEN YOU GET STUCK!" Hes so in to his Jeep and I am waiting for the moment for when he gets stuck in somethin I JUST went through and Im gonna make him get on his knees and beg for my help. Ill get that on tape dont worry. STORY TIME!!! Almost a year ago I was with my buddies Ryan, Joey, and Mike (driving a 98 or 99 JGC). Ryan told us about a cool place where he cut some cookies and had a GOOD TIME IN! The cool place ended up to be an Old golf course that they are getting rid of. We got to the front area where there is a chain link fence. So we bent the pole it was attached to and made it in. It was so cool. We spun around maybe one time and started to drive a little more. THEN when mike tried to cut another cookie we ended up sliding FOREVER until we were in some thick mud. Mike tried to rock us out but it wasnt happenin. The doors would scrap the mud we were in so deep. After we got joey to run out to see how close to the most solid ground was (since he was the only one NOT FAT in the car) and I was callin everyone I knew with big rigs Mike started to try again. I told him to switch it out of 4 wheel drive and put it back in 2 wheel cuz maybe we could get the back end to slip out a little and catch. I dont know what he did but after we were out there for around 45 mins to an hour we finally started to creep back towards the gravel. After this was said and done Ryan got his 2002 Ranger Edge and my buddy Kevin met up with us in his 96 Z71 (this was the only lifted rig out there with M/T everyone elses was stock) and they began to have a GOOD TIME in the feild while Mike sat on the gravel watching from his jeep. Ryan AND Kevin made it out fine and didnt even get close to getting stuck. Rami

I took mine off not to long ago. I dont mind it at all. But thats just me! Rami

Hey Joe did you ever figure out what was goin on? Rami

I think mine is bad too or somethin. When I turn it makes a BIG squeeking noise though. I heard if could be the bushings or whatever I dont know. HAHA dont listen to me Im the newbie still. Could be this... OR... That was in the common problem/fixes thread. Hopfully that helps u out a little. I think i need to do the turn stops on mine actually. GOOD LUCK Rami

That blows man! sorry to hear. Good luck. The only time I have ever been in a wreck is when my cousin rear ended my friends subaru loyal at about 40 mphs. The subaru then slid in to another car but just bumped it no damage what so ever. Everyone was ok other than the 6'6" 375 lbs beast known to the world as Ramithepimp77. I was in the loyal. My knees hit the dash and my head hit the "OH POOPY HANDLE" and I got out of the car saying I was gona sue my cousin (just kidding though). I have ran in to a stump with my Crown Victoria (Aaron has seen the footage). The bumper got pushed back a few but sure enough it came back out almost al the way. I also backed in to a tree with my Pathfider when I was driving across a creek (5 times) and couldnt get out! I still have to try to pop it out. Rami

With my 85' Crown Victoria I had to replace the U joints and I think that the driveline was out of balance too Im not sure. It was a while ago.N-E-Ways every time I was driving at slower speeds it would vibrate and when I needed to speed up or what ever (like on a freeway or an on-ramp or just racing some riced out civics that cant beat an old beat up granny car ahaha) It would make a LOUD clunk noise. This also happened when I let off the gas real quick too. I dont know if this is the same with your car but who knows. So ya do what Diesel Boy says! Hes the man haha. Rami

That was in the "Pathfinder Common Problems / Fixes" I dont know much about it but I would love to roll it back a few miles and find out. JK JK JK Rami

Ya when I got stuck the only thing that got ruined was my ECU, my apm that was under the drivers seat, and my front right speaker. I replaced the ECU ($135) I left my amp at the car wash, and I havent fixed the speaker yet. Its probebly alot worse in ur case. Oh ya AND I had to remove my back seats cuz they were SOAKED!!! I didnt even have them when we went to Sand Lake cuz they were still wet haha. Good luck with your pathy and Im sorry that I dont ahve any advice for you but I know NOTHING about fixing vehicles. Rami P.S. I lied I actually do have advice for you. GET PICS!!! Not only will we LOVE TO SEE THEM but I think it could help explain a point better sometimes.

Some guy at my work told me about that a while back and I just thought he was crazy. Thats sweet nice job. Oh ya what size are ur tires and do u have trouble opening the rear window? Rami

haha I remember doin that crap on my rig. THANK GOD I only got a code 55! Rami

All the clicking in my rig was from the exsaust leak. THANK YOU SAND LAKE!!! Actually its ok! It only cost 2 dollars to fix but around 2 hours to fix it. I was being lazy, I had a few beers, had to go get some weird thing from shucks that didnt even work. I finnaly got got sick of trying to get my fat fingers in between the hole and the heat sheild so I took a hamer and bent it enough to where I could almost fit 2 fingers in (while a normal human could get there whole hand in there). Rami

Hey guys whats up? I was just wonderin if there was a way to get my fog lights to work with my high beams. I read the Generation Edge website every once in a while (since my buddy has a 2002 Edge) and all it is is bending a pin on the relay for them. Is it that easy for us too? Is there any downs sides to doin this? haha Ranger site fog light mod Rami

YAY got an ECU and it started right up! That means I dont have to cry anymore and I can go to Sand Lake! Rami