Mrelcocko

My 98 Pathfinder and 97 QX4 Sent from my SM-G530T using Tapatalk

Yes p0300 and p0325 Sent from my SM-G530T using Tapatalk

Washed,waxed and done some undercoating painting. Sent from my SM-G530T using Tapatalk

Finally got my hitch on painted I think it looks pretty good Sent from my SM-G530T using Tapatalk

Great picture the best I've ever seen! Sent from my SM-G530T using Tapatalk

The first pic is by far one of the best I've ever seen, great job. Sent from my SM-G530T using Tapatalk

The 1st pic is by far one of the best pictures I've ever seen of an R50. Sent from my SM-G530T using Tapatalk

My 98 R50 Sent from my SM-G530T using Tapatalk

Are you getting the P0300 code? Sent from my SM-G530T using Tapatalk

I have but I can't turn the distributor any further due to the hold down bolt. Is the distributor installed wrong? I removed plug number one turned engine until I got it at TDC put my rotor facing plug number one but cannot get it in time because I can't turn the distributor anymore because of the bolt that holds the distributor in. Sent from my SM-G530T using Tapatalk

Myself J.Cox Sent from my SM-G530T using Tapatalk

I used small round felt tips from Walmart with sticky backing. The factory nipples are hard to get off without breaking them. It's been over a year and my cruise still works perfect. Sent from my SM-G530T using Tapatalk

Still has a miss after warmed up in drive or reverse. Not so much in park or neutral. Change distributor plugs cap rotor the whole nine yards. Still wondering if it's Advanced or retarded. Going to check will update asap. Sent from my SM-G530T using Tapatalk

The undercoating, Resonator and death wobble repairs completed. New shocks as well. You gotta love local pull a parts. Very fortunate to have one close to home. Picked up the resonator for 12.50$ Sent from my SM-G530T using Tapatalk

My 97 Quey and 98 Pathy Sent from my SM-G530T using Tapatalk

Great pictures! Love the Pathy! Sent from my SM-G530T using Tapatalk

I have no idea? How would I know? Sent from my SM-G530T using Tapatalk

Thanks a lot. I've enjoyed the hell outta her that's for sure. I'm in love with my R50's. LOL!! Sent from my SM-G530T using Tapatalk

Thanks! Ive definitely got the man hours in on both. I'm sure the Pathy's had rubber mats you could special order, but not 100% certain. Sent from my SM-G530T using Tapatalk

97 Quey. Sent from my SM-G530T using Tapatalk

Still having some issues. Put a new distributor in and still having the random miss fire p0300 MIL code. Timing is off about 7 degrees. Can't turn distributor anymore to hit 10'degrees TDC. Is it possible the distributor is off a tooth?? And that's what's causing the miss it not being in PERFECT time. When the engine is cool like overnight or parked for a while. It runs great for the first 3 to 5 min. Then starts missing. Pulled plugs and their white. Running lean. HELP!!! Sent from my SM-G530T using Tapatalk

Just about finished with the Quey. I've got about a 1,000$ in her. Picked up a factory set of floor mats from a 99 Qx4 from my local pull a part. Can't believe I found a full set. Sent from my SM-G530T using Tapatalk

Step rails completed. Sent from my SM-G530T using Tapatalk

Update on the Qx4 guy's. It's had a miss in it since I got it. It runs great when the motor is cold, but once warm, It would miss, buck, stall and eventually die. Always though would start right back up. Now can't get it started at all. Its not got any fire. Getting fuel with no vacuum leaks that I can see. Rotor spins as well. Maybe bad distributor or camshaft sensor? Gonna replace the distributor and see were it takes me. TO BE CONTINUED...... Sent from my SM-G530T using Tapatalk

Congratulations! Great picture. J.Cox from Lenoir City, TN