Jump to content

APACHECHIEF13

Members
 View Profile  See their activity

  • Posts

    173

  • Joined

  • Last visited

 Content Type 

Everything posted by APACHECHIEF13

  1. APACHECHIEF13
    The UCA from 4x4parts is 200 plus tax witch is 238 I think tax and all Sent from my Z795G using Tapatalk
  2. APACHECHIEF13
    Pic of 4x4parts UCA installedyou can compare the front to the back Sent from my Z795G using Tapatalk
  3. APACHECHIEF13
    Here are some pic of 4x4parts ucahope this helps Sent from my Z795G using Tapatalk
  4. APACHECHIEF13
    Here are some pic of 4x4 parts uca Sent from my Z795G using Tapatalk
  5. APACHECHIEF13
    I'm looking for shocks also but when I fine something worth buying I'll let you know what I got Sent from my Z795G using Tapatalk
  6. APACHECHIEF13

    Has anyone used 98 gc 5.9l coil springs on there pathy? If so what kind of lift do you get 2" or 3"

    1. Nefarious

      Nefarious

      i use 5.9L springs but I straightened the pig tail portion instead of cut them off and I got 3 inches of lift when theres no weight in my truck. about 2.5" when its loaded/steel bumper

       

    2. WD21colorado

      WD21colorado

      I pulled of some rear coild springs off of a 1995 jeep grand Cherokee ( V8 model only ) they fit. all you need to do is cut off the pig tails. and surprisingly enough they were the same size as my old springs but with the more dense coils it lifted the rear of the vehicle about 2.5 inches.

  7. APACHECHIEF13
    Nice set up. How do you like the calmini shocks? I need to find a bad ass long travel shock for my pathy. I had calmini on order but 6 weeks later and still no word so I cancelled them Sent from my Z795G using Tapatalk
  8. APACHECHIEF13
    Looks like welder the front is bad. I'll just keep my rear end welded and pass on welding the front. Sent from my Z795G using Tapatalk
  9. APACHECHIEF13
    Had to drill out the holes to 5/8 I think the hiem joints They are 5/8 hiem joints and have not done anything does yet. New UCA just got in and now u need to find time to put them on. Sent from my Z795G using Tapatalk
  10. APACHECHIEF13
    I got my new UCA in from 4x4parts.com and I'll try and get them in this weekend with some pic Sent from my Z795G using Tapatalk
  11. APACHECHIEF13
    What year of jeep will give me the most lift in the rear end? Or should I just buy lifted spring for the rear. The spring I have in it are new but off a stock 09 tj Sent from my Z795G using Tapatalk
  12. APACHECHIEF13
    Here are some pic sorry about bad pic Sent from my Z795G using Tapatalk
  13. APACHECHIEF13
    I have NP cutting get her done ya boy. Do anyone run spacers and do they hold up to hard wheeling. I'll in the rocky and it hard core in places and I don't want my wheel rolling down the mountain Sent from my Z795G using Tapatalk
  14. APACHECHIEF13
    I have my t bar set the same on both sides and both springs are sitting the same at 10" compressed. I'll send pic later tonight Sent from my Z795G using Tapatalk
  15. APACHECHIEF13
    I have uca on order from 4x4parts.com and as far as Calmini uca I would stay away from them. I order stuff from them and 6 weeks later still nothing in the mail so I called them and they said It's still on back order for another 3 weeks so I canceled the order and went to 4x4parts.com and they sent them a day later.
  16. APACHECHIEF13
    I want the web page for parts on the hydro steer kit and how to
  17. APACHECHIEF13
    I have 31x10.5x15 and I'm looking for a bigger tire. Can I fit a 35 on my stock rim?. I have my new uca on the way so i can fit a bigger tire.
  18. APACHECHIEF13
    Nice I need an alignment also do to all the fab work on my new center link I had made. I'll wait till I get my new uca in. Let me know how you like the shocks after you run they for a little bit and maybe I might pick up a set.
  19. APACHECHIEF13
    Yes UCA would help I have mine on order. I had calmini shocks on order but its been 5 weeks and still on back order so I canceled the order. What shocks did you order and how much? Sent from my Z795G using Tapatalk
  20. APACHECHIEF13
    Dose the spacer hold the springs in place? Looking like they would move with those spacers? Sent from my Z795G using Tapatalk
  21. APACHECHIEF13
    I'm getting the ones from 4x4parts just cus there cheaper then the ones from rugged rocks, or I would get them from steveo but money is everything
  22. APACHECHIEF13
    Did you measure it before you put the lift on? If so that would tell you how high it went up. If not measure it and see how high it sets and look and see what stock sets at. That should get you in the ball park range hope it helps
  23. APACHECHIEF13
    Here is a pic with the new brace with the center link last pic is a pic I didn't show with the others ones. It was not finish when I posted this. But it is all done just saving some money for new UCA and some shimes. Then off the the alignment place to get it aligned Sent from my Z795G using Tapatalk
  24. APACHECHIEF13
    There the same just a lot of work dame ifs lol Sent from my Z795G using Tapatalk
  25. APACHECHIEF13
    Those traders selling the pathy. Someone needs to be shot Sent from my Z795G using Tapatalk
×
×
  • Create New...