Bubbley11

So grab one out of a 94-95?

Sorry it took so long, it skipped my mind for a bit.

I'll try and get a picture. And no the pump if fine, ive dropped the tank before, and let me tell you I was the first to drop it, bolts were so bad back there. So it seems to me I just get a newer one???

It sucks I fill up about once every two weeks I don't drive very far but if I was too my buds would carry gas for me. I just want the range without filling up. I was just looking for a easy way to tell if it was the bigger one, so I grab the right one.

Plz then ill measure mine, I just want to go to the jy and get the right one.

Seems good, but like most people I would try to get 5 for it. The trick is to walk up with cash and lay it on the hood, knocked 800 for mine.

Most hardware stores carry some form of metal, like Lowes has tubes and square pipes, while my Home Depot has flat sections. I searched for metal stores by me and like 5 popped up when I needed metal.

I have a 15 gallon tank, which is actually 16 but I would like to put a 21 gallon tank. In the manual it says they came with both sizes and I would like to get just that much farther. Im fine with my tank as it sits but I will need two more jerry cans to go as far as my local group can go, and if they carry cans; Im about, well let just say about 50-100 miles short of them. I was wondering if I can find the size on the car some where. I've looked but have had no luck.

I got a one from a pick and pull for 21 bucks. It would have been like 15, if I hadnt had to grab the base then the lens. If you find a whole light with base and lens intact,it should be real cheap.

I never even saw this. Im here in between Marysville and Stanwood. Plenty of places to wheel, if you head east.

Look around, try to find some but this should work. http://www.tacticalarmorgroup.com/TAGStore/TAGStore/tabid/71/CategoryID/391/List/1/Level/a/productid/1779/Default.aspx

Edited. I also found a place by me that sells steel and aluminum tubes. I think i'll go with aluminum but I still have to think.

This guy mounted it on his cross bars on top. I plan to drill and put a t-bolt in my cross bars to mount it to the car. http://www.jeepforum.com/forum/f11/build-your-own-roof-rack-70-a-1290752/ And now that I look at it, I have way to much metal for it. But that is why its a rough draft.

Ive been looking round on other sites about fabing your own, and got really interested. So I decided to come up with a version I would like. It would be something like the one I made a draft of, maybe different. But i think it looks really awesome. I'll try to photoshop it on my ride, but idk if it'll work.

Im nominating Bubbley11

That looks sweet I also noticed you had or still have a thrush welded muffler on it. Is it any good?

The vg30e engines are all interchangeable. Pretty sure its 90-95 as they have exactly the same design besides the interior of the vehicle. The stock engines are very well made and should last a long time.

When you pass another pathfinder and wave, but they don't. Jeep has a wave, why can't we?

When your camping buds break down, and you go to a dealership and see another members rig outside. I was wondering who that was, 5523Pathfinder. Your people are very nice there. Your master mech. fixed my dads ford,he actually came back to the place to help us.

When you constantly check the rear of your frame for rust.

When you sit there and floor the gas, just to see a smart car fly by.

Or you could have a Trunk Monkey Ninja Thing. I'll keep an eye out for it, if they decide to run this far.