shoesandsocks

strut inserts im guessing most likely doing the koni ones like rocky 2 and me have although i havent installed mine as my kybs are fine.

i feel as though there is so many threads on this its starting to bum me out

Okay my bad i though that was your plan and trust me hats not what i think at all i just have had to many customers bring me headlights and ask me to do retrofits because there led headlight bulbs arent bright enough and i just look at them like there stupid. \

first off i want to say do not put leds in your headlights they will not be able to produce enough light to see any kind of well

vq35 it just didnt have the gay coils that were defective

Ac has always made strut spacers u just have to email them.

my 96 came with 31x10.5r15 from the factory..... nissan is weird i know when i put a true 31x10.5r15 on my 01 that was worn down to infinity i couldn't drive any where the mud flap had to come off and i had to trim the bumper

i have an off brand cost me 70 bucks i have them on both my pathys no isses ebay under frontier locking hubs

wellllllll

245 75 16 yokohama geolander at-s remove mud flap up front and heat fender liner with a gun and push it youll be set.

nice go to the junk yard and make it a 4x4 so we can be twins lol

yeah cause castrol import multi vehicle says it works with Nissan matic-d but i have never used there products before

So i figured it was time to replace my trans fluid especially since im going to be installing a new trans cooler and magnefine filter. Now i usually use mobile one in all my fluids simply because its a brand i trust i use royal purple every now and then but only when its a sale thats to good to pass up. But i notice mobille synthetic atf stop listing itself as a nissan matic d replacement still says that it is dexron 3 compliant which i guess alot of people use instead of matic d so in theroy i think it will be okay but i just want to be sure. just for record i found an old mobile 1 atf bottle we cut and use as a funnel in the shop and its beat up label reads it as a nissan matic-d and J replacement i believe might be S just wanna know if any of u guys are running this and make sure it really is just a legal issue between mobile and nissan about the name on a product.

1.5 spacer cleared the hub on my hardbody with titan 18 wheels may work for u

and there goes that short lived happiness lol

my door jamb says 5300lb flat i feel like i own a supperlagera of the r50 lol i will see what the 96 says when the wifey comes home

if i had a choice i ould go bilsteing they all have lifetime warranties so they blow u send it in and get a new one.

alright well this is just depressing i would seriously tell your fiend to go into that place and knock someone out cause he just got ripped off by his coworkers they probably cleared the code and the computer magically fixed itself not that it it happens often but its obd2 it can happen they probably needed something to blame it on so they said hey wheel spacers are easy to take off lets just say that considering nothing electrical to even cause a code is even attached to the wheel hub except the abs sensor and wire i see no way that it could cause the problem unless one of the sensors was putting it in a safe mode or something but not likely to me.

derek how much is shipping from autralia there are lots available options in that regard try to go on pcoa and see what the aussie members say

they are softer than stock but a hell of a lot taller they settle wayyyyy to much at least in the vq powered pathy i have to say not my favorite but to the op the ironman springs come from australia since u would be having them imported from there why not do the king springs that all the Aussies use

i honestly cannot recomend the ironman springs

linkinpark is on a sfd right? and u would still probably need springs and a spacer for the front borninbarn

my 96 looked similar i knew i had to replace the axle so idid what devonianwalk said but i used the wd40 rust eater and a bfg and it broke right out neither of the stock pieces were usable but i had a new axle and the manual hub so care i did not but do what the man says at first okay

NOPE STOIC IS RIGHT 4WHEELPARTS AND WIKI ARE WRONG THEY DO COME WITH COIL SPRINGS THE ONE AT THE YARD ARE CONVERSIONS he has two and the other one the 2wd is coil spring his 96 is coil spring rear also so just to be safe order these these spacers are for the 95 and look closer to the one that stoic bought up here and i do believe this tech custom do make them is 1in as well

im starting to think we both are right stoic i think they came with both im thinking when they did the facelift they switched over im gonna confirm at the graveyard now