jwmyers23

Accel super coil installed. It makes a world of differance with the Nology hot wires Now time for new plugs.

FAIL !!! It sounded like a great idea too bad it wasn't. The idea behind the swivel bolt is so when the sway bar flexes the bolt can move with it. See where I'm going. The solid pin just snapped the SB links.

I cleaned off the MAF. There was a little build up on the sensor itself. I was amazed how much better it ran. I also instaled a set of Nology hot wires. Next week I plan on putting on an Accel super coil.

Hooked pathy up to neighbors code reader. It says there's a selnoid out in the trans. I forget what it said it was. I also found out that you shouldn't weld on the exhaust with the o2 sensor in (OOPS).

Going to look at 94 Pathy for motor and trans to rebuild this winter. Maybe next spring I'll have her running right again.

Yesterday I installed new Pro Comp shocks and went for a ride with my neighbor in his 4 runner. We found a mud hole with no bottom. I think we are going back out today.

It seems like as soon as I cross one thing off my list I add two more. It's a vicious cycle.

Yep I have the same problem. Mines about twice as bad and in more than one spot. I did order new pro comp shocks today from summit should be here Monday or Tuesday

Painted the rest of the grill. Had extra paint so I did the tow hook too. Trying to figure out what to replace old shift boot with. .

My father inlaws 1967 MGB. I am the only one who drives it and the only one who fixes it. So in my book it's mine I just keep it at his house. Traxxas T-maxx with Pathfinder body Traxxas Stampede set up for sand with paddle tires. I can't wait to try the paddles out in the snow.

I stole an idea from nunya and painted my corner lights. I am going to paint the grill too just as soon as I get more paint. I used Duplicolor Perfect match champagne pearl. It is almost the same color.

That's almost how I'm gonna build mine. Whats the thickness of the metal you used?

Thanks that helps out alot

great thanks for the pics. One more question do you have any pics of the mounts. I think thats the thing I'm stuck on the most.

I was thinking something like this. If any body has made their own front bumper send some pics please.

ok found out what is wrong but not sure how to fix it. I'm not sure what I'm even looking for.

Ok started her up and this is what I got. http://youtu.be/8f-nBDZjGZY

Ok heres on for you guys and gals. My 95 XE auto started doing something weird. When I let my foot off the gas and the idle drops down to 1000 RPM's it starts to buck or hicup. It only does it with the overdrive on. Would could it be? http://youtu.be/5IOSeWyoVFw

This is what the quarter panel looked like before And after Just a shot of one of my welds with my flux core welder.

All legel now (I hope)

Out on the 4x4 beach. The roads behind the beach have some huge holes. This isn't my video but this is the road we were on. It was ALOT dryer when we were there.

Washed about 10 pounds of North Carolinia mud and sand out from underneath the old girl. I also painted my hubs black. They look better black than that rust color. Man I hate that color it's starting to show up in more and more places.