OfftourRoadie96

I just put in a K&N oil filter (never tried them before)I like the 1" wrench nut they put on the bottom of the filter. I run it with Valvoline 5W30 Synthetic.

Installed a bunch of stuff I've been collecting over the winter.....EBC Brakes & Rotors, Calipers, Braided Extended Brakelines, Inner & Outer Tie Rods, Front Stabilizer Links, Both Ball Joints, Replaced Both OEM Baffle Plates & Replaced a couple of bad wheel studs and lug nut. Installed Camber Alignment Bolts.

What recall is this????

"Besides THIS sidetrack....."

So you got your SFD Installed and your using an NX4 Spacer too?.....are you using a stock spring or an AC??? If an AC, I thought that wasn't possible due to CV limitations? I wouldn't have sold my NX4 spacer if that's the case.

You know I'll get these......eventually. Also, those Nord Locks, would be great for installing a SFD Kit huh???

I used compressed air through the line and mine worked again.

What about a SFD one? Will 33x12.5x15 on a 15x8 wheel 3.75" BS? That's what I want to put on mine.

What Back Spacing do you have? Wheel Spacers if any? How is the rub and flex any fender issues?

Stickers

I wish I had GOLD step rails when my Pathfinder was stock...... I had painted my wheels two tone & had the Gold Package.

Has anyone priced a OEM Nissan one???? Is it really in the $400-$500 range???? Is there a good aftermarket one that you'd swear by? Maybe Japanese metal, than Chinese?

Thanks To Fleurys For Discovering These...... Rockford Thermoplastic CV Boots

He's looking for 31's on stock 15's......not lifted! WHY......I Don't Know?

CONGRATULATIONS! I can't wait til mine is twenty five years old....no more E-Checks & Historical Tags!

I use a ......PELICAN CASE 1650 Fits underneath cover.....to stay out of sight. I also, can throw it in my Yakima Load Warrior Basket. Water & Air Tight, Lockable.

See if this helps...... Nissan Nut Found at O'Reilys Auto Parts for $14.99 O'Reilly Auto

Here's an R50 version of this mod. Rear Seat Hinge Mod

I was curious about that.....I've been reading on how 33&35 x 12.5 would fit GREAT on an 15"x8" rim......especially on an air down situation, they'd keep there beads better than 10.5! Here are some links about running 33 or 35 x12.5" on 15"x8" rims. (although, realistically, I'd probably shy away from 35's and all the headaches that go with it.) Yota Link Jeeps Link Now, BACKSPACING is a totally different animal.....not sure if my 3.75 BS would clear struts and fenders after a SFD?

OfftourRoadie96, on 19 February 2012 - 01:39 PM, said: What are the pros & cons of running 17" rims....I would figure you could run 33" or 35" much better with a 15" or 16" rim? Timmons:Posted 19 February 2012 - 02:33 PM Just preference really, there were a few Jeeps running 17" rims that were a 315/70/17 (35's) I was advised by many people not to run 35's because or half shafts and bearings can't take such large tires in the front. I'm going with 33's and call it good. If i ever decide to do an SAS, then 35's or higher is very likely. I wasn't really a big fan of those 17's......I didn't think those would work out to well IMO. Good call on loosing those!

No

I currently have 15x8 with 3.75 BS Pro Comps & 32 x 11.5 x 15 BFG MUD K2's with AC 2" lift. I don't want to have to buy new rims after my SFD if i dont have to (also, not fond of wheel spacers) but don't know if I could run 35's on these rims? 33's for that matter? I don't know who's running a 6" SFD with 15" rims?

Well you know the old saying, "If it's too good to be true, it probably is!"I recently purchased 2 Brand New Moog Ball Joints online for $19.10ea. I researched the part number for a MOOG ball joint and just Googled it to find the cheapest priced. This online store ( I don't want to bash, since they are giving me my money back), had the Moog logo and everything when I clicked it to purchase. Great Deal Right? What came in the mail was a plain white box with a small sticker on the end of the box that says PARTS MASTER made in China! AAAAGH! Not the familiar Blue & Yellow box that I was expecting. I immediately called to complain and am waiting for Full Refund! (Yes I returned them!). The funny thing is right after I ordered them I placed another order for some new Moog front swaybar stabilizer links. He insisted that these were REAL Moog Parts, but I canceled that order too. Any way, I learned my lesson. I'll be ordering my parts from Rock Auto next time around. Looking to buy new lower ball joints, front stabilizer links, inner & outer tierods.

Well, after all this, I've decided to go with.....NONE OF THE ABOVE....... I decided to crawl underneath with a tape measure, and decide to go with a MAGNAFLOW 12280. It was the closest to the stock size. I plan to stick with single exhaust, Magnaflow Mufflers are Bi-Directional. For me, I wasn't too worried about sound, as much as not rusting off in a year. It's a stainless steel muffler. Eventually, I'd like to replace the rest of the exhaust with stainless. I purchased it from wUnderCarParts.com for $79.00 + Free Shipping. I wonder if I could have asked even lower? Most other places had it for $98.00. I clicked the name your price button, and I thought $79 was fair and they emailed me saying they've accepted my offer! Should arrive early next week, I'll post pics / video after its installed.