headpeace

try "keyless ride" on ebay, thats what I've been using for years now

What size socket is that?

never done it either but I would guess a heat gun would probably be faster

Keylessride, search them on ebay. I bought one years ago from them for cheap and its still working. The original that came from the factory sucked, had two and both failed.

no, there's no gasket

I'd pull it off and go get a new one then. I've been through so many lifetime warranty alts I could remove and install one in my sleep probably.

I do remember some talk about this issue also

Did you have a muffler shop bend it for you?

If anyone is looking at new tires Sams club is doing a free install, mount and balance if you buy a set of BFG's through 02.14.13.

Man, that looks nice! looks like it's been well taken care of, good job

I got a really good deal on some 33x12.5x15's the other day so I snagged them. I'm thinking about selling them and trying to find some 10.5's instead. My question to you all that have run 33's is: Is there that big of a difference between 12.5 and 10.5 as far as power and MPG goes? Or is the difference so small that I should just stick with the 12.5's and be done? Any insight is appreciated

thanks B, I got those 33's today so now I am more than ready to beef up the steering. I have been gone for a while so I didn't know if there was something new I haven't seen yet. I will not consider crapmini specifically because of your issue. If someone has a crapmini that they have actually installed and it fit and worked that's another thing, but I wont buy one new.

thanx trog, good to know it looks like hoohaa is still providing CL's.

was pretty good until I removed the ugly purple tint, now it with the wiper will get rid of snow - frost eventually (slowly) mine looks about like nunya's on the first page

Alright fella's and fella-girls. I need the cheapest most effective IA brace links. Don't want Calimini-crappy (unless it is used and actually been proven to fit and work). Does Grandpa X make these? Been gone for a bit and I know I used to have the answer to this question so I apologize now for asking. Did I search, well yes, a bit and didn't find what I was looking for. So if somebody doesn't mind posting a link or listing the makers and prices of IA braces that are available nowadays I would appreciate it. I don't need calmini or 4x4 parts info, already know all about those. Thanks in advance, oh yeh, is Hoohaa still doing CL's. and if not what is everyone doing now about the CL?

they're 15X8's

Can I run 33x12.5x15 on my 3+3 93 path with 3" backspace rims?

I can't believe it's been 4 years, time flies I guess. Have fun to those that get to go

ditched mine after the BL

yeh I got the "refrigerant plus oil with system safe leak sealer" can that comes with the little gauge hose thing, then I read the owners manual and thought " I need to ask my NPORA peeps about this before I go any farther"

Is it safe to use the wally world interdynamics brand EZ Chill AC recharge can in our pathy's? Mines a 93 so I do have R-134A but I looked in the owners manual and it says "must be charged with R-134a and the lubricant, Nissan A/C System Oil Type R....Use of any other refrigerants or lubricants will cause severe damage " anyone know if it's OK to use this stuff?

the deck plate drain mod has a cover that can be put back in the "hole" to keep water out when offroad or in wet situatiions. I've never seen it done on a pathy, would like to see pics of where this was done on a pathy air box.

pics?

I'd be in for the middle plastic cover if my middle plastic pieces hadn't broke into a bunch of worthless pieces when I pulled them off to investigate doing that same thing myself. I think the boot is a good idea, nothing to break apart to replace that.

sweet, thanks pezz