- Sign In Changes: You now need to sign in using the email address associated with your account, combined with your current password. Using your display name and password is no longer supported.
- If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.
headpeace
-
Posts
1,596 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Everything posted by headpeace
-
also if u do go look at it, check the cv joint boots to make sure there are no tears, make sure they're intact cuz thats a pretty expensive job
-
yeh thats very true, but mine have been broken since I got it, not a big problem just a little noisy before warm up, but extremely common on those pathys
-
hey Ive gotta 93, bought it with about 80k miles, it now has 156k on it. I havent had any tranny problems, I towed a trailer full of my moms whole apartment from Ft worth to Little Rock (about 400 miles) around a year ago and had no problem and Im still using the original tranny cooler. If its in good condition otherwise Id jump on that, thats pretty low miles for that year, ask when the last time the timing belt was changed, should be aroun every 60k miles, also the only thing that has failed on it since Ive had it is the starter and the fuel filter, both inexpensive repairs
-
should I be concerned with the ball joints?
-
thanx hardware, ill try that, Im hopin I can do this w/o UCA's; ya know , for the $ aspect
-
ive got 31.50x10.5 15 revos bridgestone A/T are there is no rubbing , Ive been running this same size since 99 and havent had any problems, even offroad, this was stock size when my 93 was bought by the previous owner
-
I got my JGC coils today, Ill cut em tomorrow, now I see about the 3 inch diameter thing, anyway wish me luck , Im sure Ill post more soon, and pix
-
thanx seattle, Im gonna watch it, a good note being he thought there was an oil leak when he popped the hood , not after the job; but hell, its got 156+ on it, there's gonna be some oil in there L8 A
-
I found some JGC coils today for cheap at a jy. My question is when I lift the front with the torsion bars should I put ball joint spacers in as well, are they necessary? Will the lift cause early failure of my CV joints? Any help is appreciated
-
Thanx for the reply, it doesnt seem to be losin any oil so I quess Ill just keep an eye on it
-
hey, Im a newbie here, anyway I took my path to get a new timing belt theother day and dude said I was leaking oil from the gasket,. any idea which gasket this might be?
