Favorite DIY bedliner product

[AndyC]

Had to do some cutting and grinding to clearance for new tires. I want to seal up the bare metal in primer, then cover it and a small area outside the fenders in bedliner. Anyone have any experience with the rustoleum, duplicolor, hurculiner... One better than the other?? Thanks!

[CDN_S4]

I've done the same thing. Just used the rustoleum as it was on sale. Not sure how much difference there is between the brands.

[nunya]

I've personally used Herculiner brand, no personal complaints. Protect your Hootus during application!

[AndyC]

My Hootus?! If I'm not mistaken, it's generally well protected. Is further care required?!

[RF600]

Check out Monsta Liner. They have different colors. Their Web site shows off people who have done the entire outside of the vehicle. Once my paint gets bad, it's getting there, I'm planning a Monsta Liner make over.

[Precise1]

My Hootus?! If I'm not mistaken, it's generally well protected. Is further care required?!

 

https://www.youtube.com/watch?v=Fc9js0ZQlbM

 

B

[k9sar]

that will never die! LOL

 

[RedPath88]

Nope!

 

How Do I Get Herculiner Off of My Hootus?!

[nunya]

One can only hope it lives on even long after the Internet dies!

[Karmann]

I believe I used rustoleum bedliner on mine, it did an ok job, but tends to flake off if much pressure or rocks hit it. I would say that if you found a primer that bonds to the plastic a bit, then you'd have better results. I would suggest taking the liners off for full coverage, and remember to tape off the areas where the pins install, as gumming them up might not bode well.

[lerch641]

Sanded my surface down and used Duplicator rattle cans. Haven't had any issues and anytime it did chip off was due to tight trails and trees hitting the surface.