William Posted March 5, 2012 Share Posted March 5, 2012 (edited) Good news I was recently in the market for a set of DOUG THORLEY headers THY-424-2-C I learned from "Steve" at Rugged Rocks that he plans to place a new order for these Ceramic-coated headers from the factory by March 19 2012 (his deadline). The DT factory will deliver the headers by May 4 2012 which can then be shipped to all clients. The available header models: THY-424-2-C_a $469.95 THY-424-2-C_b $469.95 Which I believe stand for SHORT version and LONG version (will double check that with Steve). If you guys are interested in this Group Buy, the discount pattern will be as follows: 10% for 10 orders 15% for 15 orders 20% for 20+ orders Trust me, this opportunity will not happen again in the near future. So if you guys are interested, put your name in the list below and let us make the best of it (20% off, that's like $375/piece + S&H) William Edited March 5, 2012 by William Link to comment Share on other sites More sharing options...
William Posted March 5, 2012 Author Share Posted March 5, 2012 (edited) If interested, place you name in the list below and indicate which version you are interested in (LONG or SHORT). #1 William (Shorties) #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 Edited March 5, 2012 by William Link to comment Share on other sites More sharing options...
stalker Posted March 5, 2012 Share Posted March 5, 2012 it says it is for trucks with no lift kit.? will they now work with a lift.? Link to comment Share on other sites More sharing options...
William Posted March 5, 2012 Author Share Posted March 5, 2012 it says it is for trucks with no lift kit.? will they now work with a lift.? Yes. They will. My WD21 is already 3"SL+3"BL and they will work. The same part is available at 4x4Parts. However, they do not have the CERAMIC coated version but rather the TRIPLE-NICKEL coated ones which are far inferior to CERAMIC coating. Go ahead and join the list William Link to comment Share on other sites More sharing options...
William Posted March 5, 2012 Author Share Posted March 5, 2012 My bad. I checked with "Steve" at "Rugged Rocks" and it turned out that both versions are in fact "SHORTIES": THY-424-2-C_a $469.95 THY-424-2-C_b $469.95 As a matter of fact, "Shorties" will give more TORQUE at low RPM and are perfect for Offroad as well as Highway cruising. William Link to comment Share on other sites More sharing options...
tmoore4512 Posted March 5, 2012 Share Posted March 5, 2012 So what is the A and B variant? EGR and no EGR? Link to comment Share on other sites More sharing options...
William Posted March 6, 2012 Author Share Posted March 6, 2012 So what is the A and B variant? EGR and no EGR? The "_a" is for the Nissan Hardbody 3.0L V6 1990-1997 The "_b" is for the Nissan Pathfinder 3.0L V6 1990-1995 You can specify which one you want. Although I believe all of us on this forum should be looking for the "_b" William Link to comment Share on other sites More sharing options...
unccpathfinder Posted March 6, 2012 Share Posted March 6, 2012 Get them to replace my cracked set and ill buy another set for my gfs truck but right now I have a fskc doug thorley attitude and will weld my own before buying their stuff Link to comment Share on other sites More sharing options...
Precise1 Posted March 6, 2012 Share Posted March 6, 2012 Although I believe all of us on this forumshould be looking for the "_b" Not necessarily... Here is Seeeevo's thread. http://www.nissanpathfinders.net/forum/index.php?showtopic=31343 Thanks for the heads up though, I have the shorty in nickel chrome and am quite happy with them! B Link to comment Share on other sites More sharing options...
Tungsten Posted March 6, 2012 Share Posted March 6, 2012 These are the best. I love mine and wish I had the ceramic version instead. Definitely worth it. Link to comment Share on other sites More sharing options...
unccpathfinder Posted March 6, 2012 Share Posted March 6, 2012 Eisenhower pass with a trailer and wheeling in moab after they crack and them not want to help replace.them BC they aren't currently tooled....and try to phish shady unethical business out of you that could jeopardize your job....nope...unless they do me right as an individual then no more thorleys for me...ill fix their chrome @!*% and keep wheeling but no new product at $500 a pop when lifetime is 5 years Link to comment Share on other sites More sharing options...
MY1PATH Posted March 6, 2012 Share Posted March 6, 2012 FYI, to debunk allot of the myths based on the Thorley notes. The notes are wrong. All of them. they fit on all BL and SL pathfinders. In fact, they clear the steering shaft BETTER If you have BL. LONG TUBES come down to the bottom of the firewall and have TBI emissions ports on the left header SHORT TUBES only go about half way down and have MPFI emissions ports on the left header. Link to comment Share on other sites More sharing options...
William Posted March 6, 2012 Author Share Posted March 6, 2012 If interested, place you name in the list below and indicate which version you are interested in (LONG or SHORT). #1 William (Shorties) #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 So guys, can we get this list going please. Who is interested in a set of Thorley for as low as $375+S&H? William Link to comment Share on other sites More sharing options...
silverton Posted March 6, 2012 Share Posted March 6, 2012 thorley's aren't that great, and most people owning Pathfinder's because they were cheaper than 4Runner's.... I don't see this list even reaching 10. Link to comment Share on other sites More sharing options...
Tungsten Posted March 6, 2012 Share Posted March 6, 2012 Hell no. 4runners are @!*%. I would have a 4runner a long time ago if they were better. Thorley makes a fine set of headers. If mine broke, my name would be on that list already. Link to comment Share on other sites More sharing options...
MY1PATH Posted March 6, 2012 Share Posted March 6, 2012 My next set of headers (for the 'T93') are coming from Mr. 510. I have watched the entire build process and the development of a pathy specific left side header. I like my Thorleys and Mr. 510's are every bit as good. They do not have EGR but I'm sure he could very cheaply and easily add that per-request. Link to comment Share on other sites More sharing options...
Tungsten Posted March 6, 2012 Share Posted March 6, 2012 My next set of headers (for the 'T93') are coming from Mr. 510. I have watched the entire build process and the development of a pathy specific left side header. I like my Thorleys and Mr. 510's are every bit as good. They do not have EGR but I'm sure he could very cheaply and easily add that per-request. x2 Mr.510's headers are another great option if you can't get (or don't want) Thorleys. http://www.nissanpathfinders.net/forum/index.php?showtopic=32597&view=findpost&p=614522 Link to comment Share on other sites More sharing options...
William Posted March 11, 2012 Author Share Posted March 11, 2012 Mr.510's headers maybe as good to the Thorleys but surely more expensive. With this GB the price will drop down to like $375+S&H. How can you beat that! Anyways, please feel free to contact "Steve" directly by phone/email to place your order which needs to be done before March 19 2012 to make use of this offer: Steven Lutz "SteeevO" President Rugged Rocks, LLC Sales & Support: (909)547-4651 www.Rugged Rocks.com steven@ruggedrocksoffroad.com William Link to comment Share on other sites More sharing options...
JamesRich Posted March 11, 2012 Share Posted March 11, 2012 I was on a waiting list with SteeevO from October last year. I guess he never got enough people to complete the run so I emailed him to take me off the list. James Link to comment Share on other sites More sharing options...
Kingman Posted March 11, 2012 Share Posted March 11, 2012 Already bought my set of headers from Mr.510. Link to comment Share on other sites More sharing options...
JamesRich Posted March 12, 2012 Share Posted March 12, 2012 He's getting mine ceramic coated right now. James Link to comment Share on other sites More sharing options...
Harbinger Posted June 26, 2012 Share Posted June 26, 2012 Wish I had had the funds a few months ago. Never the less, I did just order a ceramic coated set. Link to comment Share on other sites More sharing options...
William Posted June 26, 2012 Author Share Posted June 26, 2012 Where did you order it from? William Link to comment Share on other sites More sharing options...
Harbinger Posted June 27, 2012 Share Posted June 27, 2012 (edited) Where did you order it from? William I spoke to soon. I saw them on Rugged Rocks and placed an order. Got a refund and a call from Steve today explaining the situation. Yet another reason why I shouldn't combine drinking with internet purchases. Edited June 27, 2012 by Harbinger 1 Link to comment Share on other sites More sharing options...
BikerJared Posted July 8, 2012 Share Posted July 8, 2012 (edited) Did this ever go through? I called Steve back in February/March and got on his list... he said he had some people, but was waiting for more before making an order. I'm open to other options - I've been waiting a while and need to replace these headers so I can get my truck past emmissions. Edited July 8, 2012 by BikerJared Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now