unccpathfinder Posted August 10, 2010 Author Share Posted August 10, 2010 My buddy is gonna get the pickle and oil cleaned off and then when. I get off I'm gonna go over and hopefully get them select up and the tomorrow weld them on Link to comment Share on other sites More sharing options...
beastpath Posted August 10, 2010 Share Posted August 10, 2010 looks great man Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 11, 2010 Author Share Posted August 11, 2010 locker works amazingly...verified with a 2 wheel peal in a gravel lot and turning on dry pavement...i have to replace the ****** regulator from harbor freight (half expected) and sealant...can't believe it didnt set up....but i have bigger problems keeping me from going this weekend...thinking about laying out of work on thurs to try and get her trail worthy...heres the pix from tonight truck is sitting about 2-3" lower on the passenger side so i think the sleeve in the compression rod broke in half...that's also the side that got slammed at URE... rugh rough shaggy: think this is my problem: Link to comment Share on other sites More sharing options...
Precise1 Posted August 11, 2010 Share Posted August 11, 2010 That definitely doesn't look right, so I'll buy your your truck for parts, say $800?? B Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 11, 2010 Author Share Posted August 11, 2010 Sounds like u got ureself a deal...if u add a couple 0s on the end. Link to comment Share on other sites More sharing options...
BoneZ Posted August 11, 2010 Share Posted August 11, 2010 Sounds like u got ureself a deal...if u add a couple 0s on the end. Ok here are a few more 0 on the price. $800.00 On a real note pathy is looking nice. Link to comment Share on other sites More sharing options...
MAXEDpath Posted August 11, 2010 Share Posted August 11, 2010 How about 40 payments of $19.99??????? Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 12, 2010 Author Share Posted August 12, 2010 aight holy @!*%...third efffffing time i've typed this and it didnt post...so this is the bull@!*% version...starting with the bull@!*% first...we wasted an hour relocating the truck to the hot as hell garage (i hoped that dochebag neighbor says something to me someday...he's on his way off of hte board of directors as of monday since he bypassed the president in sending us that letter who is furious over it since we made the truck look like a truck even tho it wasnt' functioning: hope this is my problem: before: after: dont laugh at the welding...i havent welded in about 2 years and this is the first time i've ever used this welder...it got a lot better towards the end but i think that'll do it for now till i can get some gussets: I hope tomorrow hwen the new poly bushings go in it fixed my gangster lean Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 12, 2010 Author Share Posted August 12, 2010 not the safest working environment but it didnt come crashing down as i wailed away with the 4lb sledge Link to comment Share on other sites More sharing options...
MAXEDpath Posted August 12, 2010 Share Posted August 12, 2010 WOW the board of directors up there a douche bags!!! and I honestly dont think having your pathy our front when your workin on it is going to cause a decrease in property value but whatever...... Link to comment Share on other sites More sharing options...
JamesRich Posted August 12, 2010 Share Posted August 12, 2010 If its your neighbor that ratted you out I hope you were pounding with that sledge in the middle of the night! I would get all my buddies to pass by his house and fill his front yard with junk car parts! this is why I don't live in a restricted neighborhood, I would have gone to jail a few times by now. James Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 12, 2010 Author Share Posted August 12, 2010 LOL...yea my buddies house so he wanted to show some complience...the Pres is pissed...I wanted to out it at the. End of the drive and take all the wheels and doors off and count down the days on the side...this guy is a mini driving doucher who needs to mind his own business...I could understand if it was the work I did in CA but this wasn't maintainence or repairs...it was upgrades... Next weeks agenda is changing his wife's brake pads in the driveway innothing but a hot pink banana hammock...LOL Link to comment Share on other sites More sharing options...
87pathy Posted August 12, 2010 Share Posted August 12, 2010 (edited) sorry it took so long, i'm out of town on business. for the OBA, I put the switch and guage just forward of the stick shift and under the console. I only had to run the control power and a guage line to the back. I have power (50amp) in the back of my rig, so i didn't have to run a power cable to the back. eventually, i'll run a line to the front bumper and to the back, but this will do for now. Edited August 12, 2010 by 87pathy Link to comment Share on other sites More sharing options...
Pezzy Posted August 12, 2010 Share Posted August 12, 2010 Next weeks agenda is changing his wife's brake pads in the driveway innothing but a hot pink banana hammock...LOL LOL! Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 12, 2010 Author Share Posted August 12, 2010 Thanks 87...I basically did the same mounting but on the other side...I like the compressor under the tank since That booger gets hot Link to comment Share on other sites More sharing options...
tmoore4512 Posted August 12, 2010 Share Posted August 12, 2010 Next weeks agenda is changing his wife's brake pads in the driveway innothing but a hot pink banana hammock...LOL LOL! X3!!! LMAO Link to comment Share on other sites More sharing options...
MAXEDpath Posted August 13, 2010 Share Posted August 13, 2010 No No No you have to wear a classic one.... Do fake leperd skin Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 13, 2010 Author Share Posted August 13, 2010 Still welding Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 13, 2010 Author Share Posted August 13, 2010 (edited) one side is on and its on good...the other side SUCKS...@!*%tiest flux core i've ever used...it looks like a kindergardener welded it together....i'll be grinding that off and redoing it in the near future if i dont rip it off tomorrow...but i'm going to bed for 2 hours and then we're hitting the road....being up 26 hrs on 3 hrs of sleep the night before SUCKS...almost put the pathy in a concrete wall on the way home b/c i was so tired Edited August 13, 2010 by unccpathfinder Link to comment Share on other sites More sharing options...
tmoore4512 Posted August 13, 2010 Share Posted August 13, 2010 Looks good! Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 13, 2010 Author Share Posted August 13, 2010 Got 3 hours of sleep in and we r loaded and hitting the highway Link to comment Share on other sites More sharing options...
MAXEDpath Posted August 13, 2010 Share Posted August 13, 2010 I like it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now